Acid-Resistant Geopolymer Based on Fly Ash–Calcium Aluminate Cement
Publication: Journal of Materials in Civil Engineering
Volume 30, Issue 7
Abstract
This paper focuses on the production of high-strength geopolymer binder by alkali activation of binary mix of fly ash and calcium aluminate cement (CAC). The fly ash was partially replaced with CAC (8, 16, and 24%) to increase the reactive phases of source materials, and the resulting blends were activated by aqueous solution of NaOH and sodium silicate with different contents and ratios and were cured hydrothermally at 95°C for 20 h. The compressive strength of the geopolymer mortar increased up to 59 MPa by optimizing the process parameters. The optimized geopolymer specimens were then immersed in HCl and solutions () for 6 months to monitor changes in the physical and mechanical properties of the mortars. These experiments were repeated with Portland cement and high alumina cement mortars as control specimens. Microstructural and characterization tools were also employed to examine the compositional and microstructural changes of the geopolymer paste. The findings showed the superior performance of geopolymer mortar against both acidic solutions compared to the control mortars due to the more stable cross-linked aluminosilicate structure formed in the geopolymer samples. XRD studies also revealed that gypsum is the dominant product in the geopolymer sample exposed to sulfuric acid as a result of reaction between calcium compounds and sulfate ions.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahmari, S., and L. Zhang. 2013. “Durability and leaching behavior of mine tailings-based geopolymer bricks.” Constr. Build. Mater. 44: 743–750. https://doi.org/10.1016/j.conbuildmat.2013.03.075.
Allahverdi, A., and F. Skvara. 2000. “Acidic corrosion of hydrated cement based materials.” Ceram. Silikáty 44 (4): 152–160.
Allahverdi, A., and F. Skvara. 2001a. “Nitric acid attack on hardened paste of geopolymeric cements. Part 1.” Ceram. Silikáty 45 (3): 81–88.
Allahverdi, A., and F. Skvara. 2001b. “Nitric acid attack on hardened paste of geopolymeric cements. Part 2.” Ceram. Silikáty 45 (4): 143–149.
Allahverdi, A., and F. Skvara. 2005. “Sulfuric acid attack on hardened paste of geopolymer cements. 1: Mechanism of corrosion at relatively high concentrations.” Ceram. Silikaty 49 (4): 225–229.
Allahverdi, A., and F. Skvara. 2006. “Sulfuric acid attack on hardened paste of geopolymer cements. 2: Corrosion mechanism at mild and relatively low concentrations.” Ceram. Silikaty 50 (1): 1–4.
Andini, S., R. Cioffi, F. Colangelo, T. Grieco, F. Montagnaro, and L. Santoro. 2008. “Coal fly ash as raw material for the manufacture of geopolymer-based products.” Waste Manage. 28 (2): 416–423. https://doi.org/10.1016/j.wasman.2007.02.001.
Ariffin, M. A. M., M. A. R. Bhutta, M. W. Hussin, M. Mohd Tahir, and N. Aziah. 2013. “Sulfuric acid resistance of blended ash geopolymer concrete.” Constr. Build. Mater. 43: 80–86. https://doi.org/10.1016/j.conbuildmat.2013.01.018.
ASTM. 2001. Standard test method for flow of hydraulic cement mortar. ASTM C1437. West Conshohocken, PA: ASTM.
ASTM. 2008a. Standard specification for flow table for use in tests of hydraulic cement. ASTM C230. West Conshohocken, PA: ASTM.
ASTM. 2008b. Standard test method for compressive strength of hydraulic cement mortars. ASTM C109. West Conshohocken, PA: ASTM.
ASTM. 2012. Standard test methods for chemical resistance of mortars, grouts, and monolithic surfacings and polymer concretes. ASTM C267–01. West Conshohocken, PA: ASTM.
ASTM. 2015. Standard test method for flow of hydraulic cement mortar. ASTM C1437–15. West Conshohocken, PA: ASTM.
Bakharev, T. 2005. “Resistance of geopolymer materials to acid attack.” Cem. Concr. Res. 35 (4): 658–670. https://doi.org/10.1016/j.cemconres.2004.06.005.
Chukanov, N. V., and A. D. Chervonnyi. 2016. Infrared spectroscopy of minerals and related compounds. Cham, Switzerland: Springer.
Davidovits, J. 2008. Geopolymer chemistry and applications. Saint-Quentin, France: Geopolymer Institute.
Deir, E., B. S. Gebregziabiher, and S. Peethamparan. 2014. “Influence of starting material on the early age hydration kinetics, microstructure and composition of binding gel in alkali activated binder systems.” Cem. Concr. Compos. 48: 108–117. https://doi.org/10.1016/j.cemconcomp.2013.11.010.
Djobo, J. N. Y., A. Elimbi, H. K. Tchakouté, and S. Kumar. 2016. “Mechanical properties and durability of volcanic ash based geopolymer mortars.” Constr. Build. Mater. 124: 606–614. https://doi.org/10.1016/j.conbuildmat.2016.07.141.
Duan, P., C. Yan, W. Zhou, W. Luo, and C. Shen. 2015. “An investigation of the microstructure and durability of a fluidized bed fly ash-metakaolin geopolymer after heat and acid exposure.” Mater. Des. 74: 125–137. https://doi.org/10.1016/j.matdes.2015.03.009.
Duxson, P., A. Fernández-Jiménez, J. L. Provis, G. C. Lukey, A. Palomo, and J. S. J. van Deventer. 2007. “Geopolymer technology: The current state of the art.” J. Mater. Sci. 42 (9): 2917–2933. https://doi.org/10.1007/s10853-006-0637-z.
Fernandez-Jimenez, A., I. García-Lodeiro, and A. Palomo. 2007. “Durability of alkali-activated fly ash cementitious materials.” J. Mater. Sci. 42 (9): 3055–3065. https://doi.org/10.1007/s10853-006-0584-8.
Gadsden, J. A. 1975. Infrared spectra of minerals and related inorganic compounds. London: Butterworths.
Gao, K., K. L. Lin, D. Y. Wang, C. L. Hwang, H. S. Shiu, Y. M. Chang, and T. W. Cheng. 2014. “Effects molar ratio on mechanical properties and the microstructure of nano- metakaolin-based geopolymers.” Constr. Build. Mater. 53: 503–510. https://doi.org/10.1016/j.conbuildmat.2013.12.003.
Heah, C. Y., H. Kamarudin, A. M. Mustafa Al Bakri, M. Bnhussain, M. Luqman, I. Khairul Nizar, C. M. Ruzaidi, and Y. M. Liew. 2012. “Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers.” Constr. Build. Mater. 35: 912–922. https://doi.org/10.1016/j.conbuildmat.2012.04.102.
Hossain, M. M., M. R. Karim, M. K. Hossain, M. N. Islam, and M. F. M. Zain. 2015. “Durability of mortar and concrete containing alkali-activated binder with pozzolans: A review.” Constr. Build. Mater. 93: 95–109. https://doi.org/10.1016/j.conbuildmat.2015.05.094.
Khale, D., and R. Chaudhary. 2007. “Mechanism of geopolymerization and factors influencing its development: A review.” J. Mater. Sci. 42 (3): 729–746. https://doi.org/10.1007/s10853-006-0401-4.
Marjanović, N., M. Komljenović, Z. Baščarević, V. Nikolić, and R. Petrović. 2015. “Physical-mechanical and microstructural properties of alkali-activated fly ash-blast furnace slag blends.” Ceram. Int. 41 (1): 1421–1435. https://doi.org/10.1016/j.ceramint.2014.09.075.
Nath, P., and P. K. Sarker. 2014. “Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition.” Constr. Build. Mater. 66: 163–171. https://doi.org/10.1016/j.conbuildmat.2014.05.080.
Page, C. L., and M. M. Page. 2007. Durability of concrete and cement composites. Oxford, UK: Elsevier.
Part, W. K., M. Ramli, and C. B. Cheah. 2015. “An overview on the influence of various factors on the properties of geopolymer concrete derived from industrial by-products.” Constr. Build. Mater. 77: 370–395. https://doi.org/10.1016/j.conbuildmat.2014.12.065.
Provis, J. L., and J. S. J. van Deventer. 2009. Geopolymers: Structures, processing, properties and industrial applications. Burlington, NJ: Elsevier.
Provis, J. L., and J. S. J. van Deventer. 2014. Alkali activated materials. New York: Springer.
Rashad, A. M. 2014. “A comprehensive overview about the influence of different admixtures and additives on the properties of alkali-activated fly ash.” Mater. Des. 53: 1005–1025. https://doi.org/10.1016/j.matdes.2013.07.074.
Reddy, M. S., P. Dinakar, and B. Hanumantha Rao. 2016. “A review of the influence of source material’s oxide composition on the compressive strength of geopolymer concrete.” Microporous Mesoporous Mater. 234: 12–23. https://doi.org/10.1016/j.micromeso.2016.07.005.
Sata, V., A. Sathonsaowaphak, and P. Chindaprasirt. 2012. “Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack.” Cem. Concr. Compos. 34 (5): 700–708. https://doi.org/10.1016/j.cemconcomp.2012.01.010.
Scrivener, K. L., and A. Capmas. 1998. “13 - Calcium aluminate cements A2 - Hewlett, Peter C.” In Lea’s chemistry of cement and concrete. 4th Ed. 713–782. Oxford, UK: Butterworth-Heinemann.
Scrivener, K. L., and J. F. Young. 1997. Mechanisms of chemical degradation of cement-based systems. Boca Raton, FL: CRC Press.
Song, X. J., M. Marosszeky, M. Brungs, and R. Munn. 2005. “Durability of fly ash based geopolymer concrete against sulphuric acid attack.” In Proc., Int. Conf. on Durability of Building Materials and Components, Underwood, QLD, Australia: In-house Publishing.
Thokchom, S. 2014. “Fly ash geopolymer pastes in sulphuric acid.” Int. J. Eng. Innovation and Res. 3: 943–947.
Vafaei, M., and A. Allahverdi. 2016. “Influence of calcium aluminate cement on geopolymerization of natural pozzolan.” Constr. Build. Mater. 114: 290–296. https://doi.org/10.1016/j.conbuildmat.2016.03.204.
Vafaei, M., and A. Allahverdi. 2017. “High strength geopolymer binder based on waste-glass powder.” Adv. Powder Technol. 28 (1): 215–222. https://doi.org/10.1016/j.apt.2016.09.034.
Yun-Ming, L., H. Cheng-Yong, M. M. Al Bakri, and K. Hussin. 2016. “Structure and properties of clay-based geopolymer cements: A review.” Prog. Mater. Sci. 83: 595–629. https://doi.org/10.1016/j.pmatsci.2016.08.002.
Zhang, M., M. Zhao, G. Zhang, D. Mann, K. Lumsden, and M. Tao. 2016. “Durability of red mud-fly ash based geopolymer and leaching behavior of heavy metals in sulfuric acid solutions and deionized water.” Constr. Build. Mater. 124: 373–382. https://doi.org/10.1016/j.conbuildmat.2016.07.108.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Aug 7, 2017
Accepted: Jan 5, 2018
Published online: May 10, 2018
Published in print: Jul 1, 2018
Discussion open until: Oct 10, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.