Simplified Mathematical Model for Concrete Carbonation
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 10
Abstract
A simplified mathematical model for concrete carbonation has been developed and compared with data from accelerated and real exposures. A chamber for an accelerated carbonation test has been built, and the results derived from the test have been used to propose the simplified mathematical model. Two different concrete specimens, denoted and , were exposed. For concrete, the proposed mathematical model is a mass balance among , , and C-S-H and takes into account the change of the porosity with time. Two different simulation software programs were employed to solve the set of differential equations. The model fits well experimental results reported in other works allowing prediction of service life in concrete structures. On the other hand, concrete did not suffer carbonation. A comparative analysis of behavior of both specimens was made.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful to Departamento Administrativo de Ciencia, Tecnología e Innovación COLCIENCIAS and Universidad de Antioquia for financial assistance (projects 110242520643 and 463-2008). This work has been partially funded by “Patrimonio Autónomo Fondo Nacional de Financiamiento para la Ciencia, la Tecnología y la Innovación, Francisco José de Caldas y el Servicio Nacional de Aprendizaje SENA.”
References
Alonso, A., and Andrade, C. (1993). “Life time of rebars in carbonated concrete.” Progress in understanding and prevention, J. M. Costa and A. D. Mercer, eds., Institute of Materials, London, 634–641.
ASTM. (2007). “Standard practice for making and curing concrete test specimens in the laboratory.” ASTM C192/C192M-07, West Conshohocken, PA.
ASTM. (2013). “Standard specification for concrete aggregates.” ASTM C33/C33M-13, West Conshohocken, PA.
Burkan, O., and Razaqpur, A. G. (2004). “Finite element modeling of coupled heat transfer, moisture transport and carbonation processes in concrete structures.” Cem. Concr. Compos., 26(1), 57–73.
Castellote, M., and Andrade, C. (2008). “Modelling the carbonation of cementitious matrixes by means of the unreacted-core model, UR-CORE.” Cem. Concr. Res., 38(12), 1374–1384.
Chang, C. F., and Chen, J. W. (2006). “The experimental investigation of concrete carbonation depth.” Cem. Concr. Res., 36(9), 1760–1767.
Chang, J. J., Yeih, W. C., Huang, R., and Chi, J. M. (2003). “Mechanical properties of carbonated concrete.” J. Chin. Inst. Eng., 26(4), 513–522.
Comsol Multiphysics version 3.5 [Computer software]. COMSOL Group, Stockholm, Sweden.
Correa, E., Penaranda, S., Castaño, J. G., and Echeverria, F. (2010). “Concrete deterioration in Colombian urban atmospheres.” Rev. Fac. Ing. Univ. Antioquia, 52, 41–46.
Helene, P., and Castro-Borges, P. (2009). “A novel method to predict concrete carbonation.” Concr. Cem. Investig. Desarro., 1(1), 25–35.
Khunthongkeaw, J., Tangtermsirikul, S., and Leelawat, T. (2006). “A study on carbonation depth prediction for fly ash concrete.” Constr. Build. Mater., 20(9), 744–753.
Liang, M. T., and Lin, S. M. (2003). “Modeling the transport of multiple corrosive chemicals in concrete structures: Synergetic effect study.” Cem. Concr. Res., 33(12), 1917–1924.
Linares, D., and Sánchez, M. (2003). “Construction, operation and performance of a chamber for tests of accelerated carbonation.” Rev. Téc. Ing. Univ. Zulia, 26(1), 34–44.
MATLAB [Computer software]. MathWorks, Natick, MA.
Meier, S. A., Peter, M. A., Muntean, A., and Bohm, M. (2005). Modelling and simulation of concrete carbonation with internal layers, Univ. of Bremen, Centre for Industrial Mathematics, Bremen, Germany.
Meier, S. A., Peter, M. A., Muntean, A., and Bohm, M. (2007). “Dynamics of the internal reaction layer arising during carbonation of concrete.” Chem. Eng. Sci., 62(4), 1125–1137.
Monteiro, I., Branco, F. A., de Brito, J., and Neves, R. (2012). “Statistical analysis of the carbonation coefficient in open air concrete structures.” Constr. Build. Mater., 29(1), 263–269.
Morandeau, A., Thiéry, M., and Dangla, P. (2014). “Investigation of the carbonation mechanism of CH and C-S-H in terms of kinetics, microstructure changes and moisture properties.” Cem. Concr. Res., 56, 153–170.
Moreno, E., Domínguez, G., Cob, J., and Duarte, F. (2004). “Efecto de la relación agua/cemento en la velocidad de carbonatación del concreto utilizando una cámara de aceleración [Effect of water/cement ratio on the carbonation rate of concrete using an accelerated chamber].” Ingeniería, 8(2), 117–130 (in Spanish).
Ngala, V. T., and Page, C. L. (1997). “Effects of carbonation on pore structure and diffusional properties of hydrated cement pastes.” Cem. Concr. Res., 27(7), 995–1007.
Papadakis, V. G., Vayenas, C. G., and Fardis, M. N. (1991). “Fundamental modeling and experimental investigation of concrete carbonation.” ACI Mater. J., 88(4), 363–373.
Park, D. C. (2008). “Carbonation of concrete in relation to CO2 permeability and degradation of coatings.” Constr. Build. Mater., 22(11), 2260–2268.
Peter, M. A., Muntean, A., Meier, S. A., and Bohm, M. (2008). “Competition of several carbonation reactions in concrete: A parametric study.” Cem. Concr. Res., 38(12), 1385–1393.
Polder, R., Andrade, C., Elsener, B., Vennesland, O., Gulikers, J., Weidert, R., and Raupach, M. (2000). “Test methods for on site measurement of resistivity of concrete.” Mater. Struct., 33(10), 603–611.
Saetta, A. V., and Vitaliani, R. V. (2004). “Experimental investigation and numerical modeling of carbonation process in reinforced concrete structures. I: Theoretical formulation.” Cem. Concr. Res., 34(4), 571–579.
Saetta, A. V., and Vitaliani, R. V. (2005). “Experimental investigation and numerical modeling of carbonation process in reinforced concrete structures. II: Practical applications.” Cem. Concr. Res., 35(5), 958–967.
Sanjuán, M. A., and del Olmo, C. (2001). “Carbonation resistance of one industrial mortar used as a concrete coating.” Build. Environ., 36(8), 949–953.
Sisomphon, K., and Franke, L. (2007). “Carbonation rates of concretes containing high volume of pozzolanic materials.” Cem. Concr. Res., 37(12), 1647–1653.
Song, H. W., Kwon, S. J., Byun, K. J., and Park, C. K. (2006). “Predicting carbonation in early-aged cracked concrete.” Cem. Concr. Res., 36(5), 979–989.
Steffens, A., Dinkler, D., and Ahrens, H. (2002). “Modeling carbonation for corrosion risk prediction of concrete structures.” Cem. Concr. Res., 32(6), 935–941.
Trocónis, O. (1998). Manual for inspecting, evaluating and diagnosing reinforced concrete structures, CYTED, Madrid, Spain.
Vera, R., Villaroel, M., Delgado, D., Carvajal, A. M., de Barbieri, F., and Troconis, O. (2009). “DURACON: Influencia de la acción del medio ambiente en la durabilidad del concreto [DURACON: Effect of environment on reinforced concrete durability].” Rev. Constr., 8(1), 13–23 (in Spanish).
Villain, G., Thiery, M., and Platret, G. (2007). “Measurement methods of carbonation profiles in concrete: Thermogravimetry, chemical analysis and gammadensimetry.” Cem. Concr. Res., 37(8), 1182–1192.
Wang, X.-Y., and Lee, H.-S. (2009a). “A model for predicting the carbonation depth of concrete containing low-calcium fly ash.” Constr. Build. Mater., 23(2), 725–733.
Wang, X.-Y., and Lee, H.-S. (2009b). “A model predicting carbonation depth of concrete containing silica fume.” Mater. Struct., 42(6), 691–704.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: May 11, 2016
Accepted: Mar 8, 2017
Published online: Jun 8, 2017
Published in print: Oct 1, 2017
Discussion open until: Nov 8, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.