Effects of Laboratory Aging on Properties of Biorejuvenated Asphalt Binders
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 10
Abstract
This paper presents the results from a laboratory investigation on the effects of aging on the properties of two binders recovered from two different sources of Reclaimed Asphalt (RA) and additivated with a biorejuvenator derived from pine trees. It has been already proven that the rejuvenators are able to restore some of the properties of the aged binder present in the RA, but nowadays their effects into the long-term period are not well known. In this regard, the rejuvenated asphalt binders and a virgin binder, defined as a target, have been aged artificially to simulate short- and long-term aging. All binders have been studied conducting physical, chemical, rheological, and performance-related tests at three different aging levels. Results show that physical and rheological properties can be fully restored by the addition of the proper dose of rejuvenator, while the chemical composition should be investigated in more detail. Rejuvenated binders exhibit great long-term performance especially at high and low temperatures, but also show significant resistance against fatigue at intermediate temperatures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank Mr. Porot for his insightful comments during the revision process of the paper.
References
AASHTO. (2014). “Estimating damage tolerance of asphalt binders using the linear amplitude sweep.” AASHTO TP101, Washington, DC.
Anderson, D., et al. (1994). “Binder characterization and evaluation—Volume 3: Physical characterization.” Strategic Highway Research Program, Washington, DC.
Anderson, D., and Christensen, D. (1992). “Interpretation of dynamic mechanical test data for paving grade asphalt.” J. Assoc. Asphalt Paving Technol., 61, 67–116.
Asli, H., Ahmadinia, E., Zargar, M., and Karim, M. R. (2012). “Investigation on physical properties of waste cooking oil-rejuvenated bitumen binder.” Constr. Build. Mater., 37, 398–405.
ASTM. (2012a). “Standard test method for determination of asphaltenes (heptane insolubles) in crude petroleum and petroleum products.” ASTM D6560, West Conshohoken, PA.
ASTM. (2012b). “Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test).” ASTM D2872, West Conshohoken, PA.
ASTM. (2013). “Standard specification for performance graded asphalt binder.” ASTM D6373, West Conshohoken, PA.
ASTM. (2015). “Multiple stress creep and recovery (MSCR) of asphalt binder using a dynamic shear rheometer.” ASTM D7405, West Conshohoken, PA.
Barco Carrión, A. J., Lo Presti, D., and Airey, G. D. (2015). “Binder design of high RAP content hot and warm asphalt mixture wearing courses.” Road Mater. Pavement Des., 16, 460–474.
Booshehrian, A., Mogawer, W. S., and Bonaquist, R. (2013). “How to construct an asphalt binder master curve and assess the degree of blending between rap and virgin binders.” J. Mater. Civ. Eng., 1813–1821.
BSI (British Standard Institution). (2010). “Bitumen and bituminous binders—Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus.” BS EN 13302, London.
BSI (British Standard Institution). (2012c). “Bitumen and bituminous binders—Accelerated long-term aging conditioning by a pressure aging vessel (PAV).” BS EN 14769, London.
BSI (British Standard Institution). (2012d). “Bitumen and bituminous binders—Determination of complex shear modulus and phase angle—Dynamic shear rheometer (DSR).” BS EN 14770, London.
BSI (British Standard Institution). (2012e). “Bitumen and bituminous binders—Determination of the flexural creep stiffness—Bending beam rheometer (BBR).” BS EN 14771, London.
BSI (British Standard Institution). (2012f). “Bituminous mixtures—Test methods for hot mix asphalt. Part 1: Soluble binder content.” BS EN 12697-1, London.
BSI (British Standard Institution). (2012g). “Bituminous mixtures—Test methods for hot mix asphalt. Part 4: Binder recovery: Fractionating column.” BS EN 12697-4, London.
BSI (British Standard Institution). (2015a). “Bitumen and bituminous binders—Determination of needle penetration.” BS EN 1426, London.
BSI (British Standard Institution). (2015b). “Bitumen and bituminous binders—Determination of the FRAASS breaking point.” BS EN 12593, London.
BSI (British Standard Institution). (2015c). “Bitumen and bituminous binders—Determination of the softening point—Ring and ball method.” BS EN 1427, London.
Carlson, R. E. (2014). “Feasibility of using 100% recycled asphalt pavement mixtures for road construction.” M.S. thesis, Univ. of Iowa, Ames, IA.
Chen, M., Leng, B., Wu, S., and Sang, Y. (2014a). “Physical, chemical, and rheological properties of waste edible vegetable oil rejuvenated asphalt binders.” Constr. Build. Mater., 66, 286–298.
Chen, M., Xiao, F., Putman, B., Leng, B., and Wu, S. (2014b). “High temperature properties of rejuvenating recovered binder with rejuvenator, waste cooking oil and cotton seed oils.” Constr. Build. Mater., 59, 10–16.
Cooper, S. B., III, Mohammad, L. N., and Elseifi, M. (2013). “Evaluation of asphalt mixtures containing renewable binder technologies.” Int. J. Pavement Res. Technol., 6(5), 570–575.
Hansen, K. R., and Copeland, A. (2015). “Asphalt pavement industry survey on recycled materials and warm-mix asphalt usage: 2014.” Federal Highway Administration, Washington, DC.
Hunter, R. N., Self, A., and Read, J. (2015). The shell bitumen handbook, 6th Ed., ICE Publishing, U.K.
Jacques, C., et al. (2015). “Effect of silo storage time on the characteristic of virgin and RAP asphalt mixtures.” TRB 95th Annual Meeting Compendium of Papers, Transportation Research Board, Washington, DC, 16–1474.
Jia, X., Huang, B., Bowers, B. F., and Zhao, S. (2014). “Infrared spectra and rheological properties of asphalt cement containing waste engine oil residue.” Constr. Build. Mater., 50, 683–691.
Kennedy, T. W., et al. (1994). “Superior performing asphalt pavements (Superpave): The product of the SHRP asphalt research program.” Strategic Highway Research Program, National Research Council, Washington, DC.
King, G., Anderson, M., Hanson, D., and Blankenship, P. (2012). “Using black space diagrams to predict age-induced cracking.” 7th RILEM Int. Conf. on Cracking in Pavements, 453–463.
Lehtimäki, H. (2012). “Rejuvenating RAP with light oil product and a new mixing method for hot in-plant recycling.” M.S. thesis, Aalto Univ. School of Engineering, Espoo, Finland.
Lo Presti, D., Barco Carrión, A. J., Airey, G., and Hajj, E. (2016). “Towards 100% recycling of reclaimed asphalt in road surface courses: Binder design methodology and case studies.” J. Cleaner Prod., 131, 43–51.
Mills-Beale, J., You, Z., Fini, E., Zada, B., Lee, C. H., and Yap, Y. K. (2014). “Aging influence on rheology properties of petroleum based asphalt modified with biobinder.” J. Mater. Civ. Eng., 358–366.
Mollenhauer, K. (2010). “Synthesis of national and international documents on existing knowledge regarding the recycling of reclaimed road materials in asphalt.” Eurasphalt and Eurobitume Congress, Dismantling and Recycling Techniques for Road Materials, Istanbul, Turkey.
Nayak, P., and Sahoo, U. C. (2015). “A rheological study on aged binder rejuvenated with Pongamia oil and composite castor oil.” Int. J. Pavement Eng., 1–13.
Ongel, A., and Hugener, M. (2015). “Impact of the rejuvenators on aging properties of bitumen.” Constr. Build. Mater., 94, 467–474.
Peralta, J., Williams, R. C., Rover, M., and Silva, H. (2012). “Development of rubber modified fractionated bio-oil for use as noncrude petroleum binder in flexible pavements.” Alternative Binders for Sustainable Asphalt Pavements: Papers from a Workshop, Transportation Research Board, Washington, DC, 23–36.
Rowe, G. M., Barry, J., and Crawford, K. (2016). “Evaluation of a 100% Rap Recycling Project in Fort Wayne, Indiana.” 8th RILEM Int. Symp. on Testing and Characterization of Sustainable and Innovative Bituminous Materials, 11, 941–951.
Tanghe, T., Lemoine, G., Nösler, I., and Kloet, B. (2012). “Influence of rejuvenating additives on recycled asphalt (RAP) properties.” 5th Eurasphalt and Eurobitumen Congress, Eurasphalt and Eurobitume, Istanbul, Turkey.
Tayh, S. A., Muniandy, R., Hassim, S., Jakarni, F., and Aburkaba, E. (2014). “An overview of utilization of bio-oil in hot mix asphalt.” WALIA J., 30(S3), 131–141.
Widyatmoko, I., Heslop, M. W., and Elliott, R. C. (2005). “The viscous to elastic transition temperature and the in situ performance of bituminous and asphaltic materials.” Asphalt Professional, J. Institute Asphalt Technol., 14, 3–7.
Yang, X. (2013). “The laboratory evaluation of bio oil derived from waste resources as extender for asphalt binder.” M.S. thesis, Michigan Technological Univ., Houghton, MI.
Yang, X., and You, Z. (2015). “High temperature performance evaluation of bio-oil modified asphalt binders using the DSR and MSCR tests.” Constr. Build. Mater., 76, 380–387.
Yu, X., Zaumanis, M., Dos Santos, S., and Poulikakos, L. D. (2014). “Rheological, microscopic, and chemical characterization of the rejuvenating effect on asphalt binders.” Fuel, 135, 162–171.
Zaumanis, M., Mallick, R., and Frank, R. (2013). “Evaluation of rejuvenator’s effectiveness with conventional mix testing for 100% RAP mixtures.” TRB 92nd Annual Meeting Compendium of Papers, Transportation Research Board, Washington, DC, 1–14.
Zaumanis, M., Mallick, R. B, Poulikakos, L., and Frank, R. (2014a). “Influence of six rejuvenators on the performance properties of reclaimed asphalt pavement (RAP) binder and 100% recycled asphalt mixtures.” Constr. Build. Mater., 71, 538–550.
Zaumanis, M., Mallick, R. B., and Frank, R. (2014b). “Determining optimum rejuvenator dose for asphalt recycling based on Superpave performance grade specification.” Constr. Build. Mater., 69, 159–166.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Nov 12, 2016
Accepted: Mar 1, 2017
Published online: Jun 8, 2017
Published in print: Oct 1, 2017
Discussion open until: Nov 8, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.