Transport due to Diffusion, Drying, and Wicking in Concrete Containing a Shrinkage-Reducing Admixture
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 9
Abstract
Shrinkage-reducing admixtures (SRAs) influence moisture and ionic transport in concrete by altering the properties of the pore solution (the surface tension, viscosity, and contact angle). This paper reports measurements of water vapor desorption isotherms in cementitious systems with different SRA contents. In addition, isothermal drying and wicking experiments were performed for concrete with different SRA contents. Similar pore size distributions and pore volumes were measured for plain concrete and concrete containing SRA. Less water was lost during isothermal drying for systems with SRA. Further, there was a reduction in chloride ion penetration for concrete with a higher SRA content during wicking. The transport processes are described quantitatively using a modified moisture-ion transport model. The viscosity of the pore fluid, the capillary pressure, and the ionic diffusion coefficients are considered as a function of SRA concentration. The simulation results are comparable to the experimentally measured data, which sheds light on the feasibility of predicting the moisture loss and chloride migration in concrete containing SRA.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work described in this paper was conducted in the Pankow Laboratory and Sensing Laboratory at Purdue University. The contents of this paper reflect the perspectives of the authors, who are responsible for the facts and the accuracy of the data presented herein. The authors acknowledge Daming Luo, Qian Tian, and Sheng Qiang for their help with the experimental work.
References
ACI (American Concrete Institute) Committee 231. (2010). “Report on early-age cracking: Causes, measurements, and mitigation.” ACI 231R-10, American Concrete Institute, Farmington Hills, MI.
Ai, H., and Young, J. F. (1997). “Mechanisms of shrinkage reduction using a chemical admixture.” Proc., 10th Int. Congress on the Chemistry of Cement, Amarkai AB and Congrex, Göteborg, Sweden.
Aldred, J. M. (2008). Water transport due to wick action through concrete, Curtin Univ. of Technology, Bentley, WA.
Anderberg, A., and Wadsõ, O. L. (2008). “Method for simultaneous determination of sorption isotherms and diffusivity of cement-based materials.” Cem. Concr. Res., 38(1), 89–94.
Archer, D. G., and Carter, R. W. (2000). “Thermodynamic properties of the system.” J. Phys. Chem. B, 104(35), 8563–8584.
ASTM. (2013). “Standard test method for density, absorption, and voids in hardened concrete.” ASTM C642-13, West Conshohocken, PA.
ASTM. (2017). “Standard specification for portland cement.” ASTM C150/C150M-17, West Conshohocken, PA.
Azenha, M., Maekawa, K., Ishida, T., and Faria, R. (2007). “Drying induced moisture losses from mortar to the environment. I: Experimental research.” Mater. Struct., 40(8), 801–811.
Baroghel-Bouny, V. (2007a). “Water vapour sorption experiments on hardened cementitious materials. I: Essential tool for analysis of hygral behaviour and its relation to pore structure.” Cem. Concr. Res., 37(3), 414–437.
Baroghel-Bouny, V. (2007b). “Water vapour sorption experiments on hardened cementitious materials. II: Essential tool for assessment of transport properties and for durability prediction.” Cem. Concr. Res., 37(3), 438–454.
Baroghel-Bouny, V., Thiery, M., and Wang, X. (2011). “Modelling of isothermal coupled moisture-ion transport in cementitious materials.” Cem. Concr. Res., 41(8), 828–841.
Barrett, E. P., Joyner, L. G., and Halenda, P. P. (1951). “The determination of pore volume and area distributions in porous substances. I: Computations from nitrogen isotherms.” J. Am. Chem. Soc., 73(1), 373–380.
Bella, C. D., Villani, C., Hausheer, E., and Jason, W. (2012). “Chloride transport measurements for a plain and internally cured concrete mixture.” ACI Spec. Publ., 290, 1–16.
Bentz, D. P., Geiker, M. R., and Hansen, K. K. (2001). “Shrinkage-reducing admixtures and early-age desiccation in cement pastes and mortars.” Cem. Concr. Res., 31(7), 1075–1085.
Bentz, D. P., Snyder, K. A., Cass, L. C., and Peltz, M. A. (2008). “Doubling the service life of concrete structures. I: Reducing ion mobility using nanoscale viscosity modifiers.” Cem. Concr. Compos., 30(8), 674–678.
Bentz, D. P., Snyder, K. A., Peltz, M. A., Obla, K., and Kim, H. (2013). “Viscosity modifiers to enhance concrete performance.” ACI Mater. J., 110(5), 495–502.
Bu, Y., Luo, D., and Weiss, J. (2014a). “Using Fick’s second law and Nernst–Planck approach in prediction of chloride ingress in concrete materials.” Adv. Civ. Eng. Mater., 3(1), 566–585.
Bu, Y., Spragg, R., and Weiss, W. J. (2014b). “Comparison of the pore volume in concrete as determined using ASTM C642 and vacuum saturation.” Adv. Civ. Eng. Mater., 3(1), 308–315.
Buenfeld, N. R., Shurafa-Daoudi, M.-T., and McLoughlin, I. M. (1995). “Chloride transport due to wick action in concrete.” RILEM international workshop on chloride penetration into concrete, L. O. Nilsson and J. P. Ollivier, eds., RILEM Publications, Saint-Remy-les-Chevreuse, France, 315–324.
Folliard, K. J., and Berke, N. S. (1997). “Properties of high-performance concrete containing shrinkage-reducing admixture.” Cem. Concr. Res., 27(9), 1357–1364.
Goyeneche, M., Lasseux, D., and Bruneau, D. (2002). “A film-flow model to describe free water transport during drying of a hygroscopic capillary porous medium.” Transp. Porous Media, 48(2), 125–158.
Hall, C. (1989). “Water sorptivity of mortars and concretes: A review.” Mag. Concr. Res., 41(147), 51–61.
Hall, C., and Hoff, W. D. (2011). “Unsaturated flows.” Water transport in brick, stone and concrete, CRC Press, London, 102–151.
Jennings, H. M., Kumar, A., and Sant, G. (2015). “Quantitative discrimination of the nano-pore-structure of cement paste during drying: New insights from water sorption isotherms.” Cem. Concr. Res., 76, 27–36.
Jensen, O. M., Hansen, P. F., Coats, A. M., and Glasser, F. P. (1999). “Chloride ingress in cement paste and mortar.” Cem. Concr. Res., 29(9), 1497–1504.
Leão, T. P., and Tuller, M. (2014). “Relating soil specific surface area, water film thickness, and water vapor adsorption.” Water Resour Res, 50(10), 7873–7885.
Lin, C.-L., and Lee, L.-S. (2003). “A two-ionic-parameter approach for ion activity coefficients of aqueous electrolyte solutions.” Fluid Phase Equilib., 205(1), 69–88.
Lopes, A. N. M., Silva, E. F., Dal Molin, D. C. C., and Toledo Filho, R. D. T. (2013). “Shrinkage-reducing admixture: Effects on durability of high-strength concrete.” ACI Mater. J., 110(4), 365–374.
Lucero, C. L. (2015). “Quantifying moisture transport in cementitious materials using neutron radiography.” Purdue Univ., West Lafayette, IN.
Lura, P., Pease, B., Mazzotta, G. B., Rajabipour, F., and Weiss, J. (2007). “Influence of shrinkage-reducing admixtures on development of plastic shrinkage cracks.” ACI Mater. J., 104(2), 187–194.
Ma, H. Y., and Li, Z. J. (2013). “Realistic pore structure of portland cement paste: Experimental study and numerical simulation.” Comput. Concr., 11(4), 317–336.
Mainguy, M., Coussy, O., and Baroghel-Bouny, V. (2001). “Role of air pressure in drying of weakly permeable materials.” J. Eng. Mech., 582–592.
Marchand, J., Gerard, B., and Delagrave, A. (1998). “Ion transport mechanisms in cement-based materials.” Materials science concrete, J. Skalny and S. Mindess, eds., American Ceramic Society, Westerville, OH, 307–400.
Marchand, J., and Samson, E. (2009). “Predicting the service-life of concrete structures—Limitations of simplified models.” Cem. Concr. Compos., 31(8), 515–521.
Millington, R. J., and Shearer, R. C. (1971). “Diffusion in aggregated porous media.” Soil Sci., 3(6), 372–378.
Mualem, Y. (1976). “A new model for predicting the hydraulic conductivity of unsaturated porous media.” Water Resour Res., 12(3), 513–522.
NIST. (2017). “Estimation of pore solution conductivity.” ⟨http://ciks.cbt.nist.gov/poresolncalc.html⟩ (Apr. 27, 2017).
Olsson, N., Baroghel-Bouny, V., Nilsson, L.-O., and Thiery, M. (2013). “Non-saturated ion diffusion in concrete—A new approach to evaluate conductivity measurements.” Cem. Concr. Compos., 40, 40–47.
Park, J.-J., Yoo, D.-Y., Kim, S.-W., and Yoon, Y.-S. (2013). “Drying shrinkage cracking characteristics of ultra-highperformance fibre reinforced concrete with expansive and shrinkage reducing agents.” Mag. Concr. Res., 65(4), 248–256.
Pease, B., Shah, B., and Weiss, J. (2005). “Shrinkage behavior and residual stress development in mortar containing shrinkage reducing admixtures (SRAs).” ACI Spec. Publ., 227, 285–302.
Qiao, C., Ni, W., and Weiss, J. (2015). “Influence of shrinkage reducing admixtures on chloride binding and diffusion.” 14th Int. Congress on the Chemistry of Cement, China National Building Materials Group Corporation, Beijing.
Rajabipour, F., Sant, G., and Weiss, J. (2008). “Interactions between shrinkage reducing admixtures (SRA) and cement paste’s pore solution.” Cem. Concr. Res., 38(5), 606–615.
Rajabipour, F., and Weiss, J. (2007). “Electrical conductivity of drying cement paste.” Mater. Struct., 40(10), 1143–1160.
Ranaivomanana, H., Verdier, J., Sellier, A., and Bourbon, X. (2013). “Prediction of relative permeabilities and water vapor diffusion reduction factor for cement-based materials.” Cem. Concr. Res., 48, 53–63.
Samson, E., Maleki, K., Marchand, J., and Zhang, T. (2008). “Determination of the water diffusivity of concrete using drying/absorption test results.” J. ASTM Int., 5(7), 1–12.
Samson, E., Marchand, J., Snyder, K. A., and Beaudoin, J. J. (2005). “Modeling ion and fluid transport in unsaturated cement systems in isothermal conditions.” Cem. Concr. Res., 35(1), 141–153.
Sant, G., Bentz, D., and Weiss, J. (2011a). “Capillary porosity depercolation in cement-based materials: Measurement techniques and factors which influence their interpretation.” Cem. Concr. Res., 41(8), 854–864.
Sant, G., Eberhardt, A., Bentz, D., and Weiss, J. (2010). “Influence of shrinkage-reducing admixtures on moisture absorption in cementitious materials at early ages.” J. Mater. Civ. Eng., 277–286.
Sant, G., Lothenbach, B., Juilland, P., Le Saout, G., Weiss, J., and Scrivener, K. (2011c). “The origin of early age expansions induced in cementitious materials containing shrinkage reducing admixtures.” Cem. Concr. Res., 41(3), 218–229.
Sato, T., Goto, T., and Sakai, K. (1983). “Mechanism for reducing drying shrink- age of hardened cement by organic additives.” CAJ Rev., 5, 52–55.
Scherer, G. W. (1990). “Theory of drying.” J. Am. Ceramic Soc., 73(1), 3–14.
Shah, S. P., Karaguler, M. E., and Sarigaphuti, M. (1992). “Effects of shrinkage-reducing admixtures on restrained shrinkage cracking of concrete.” ACI Mater. J., 89(3), 289–295.
Shah, S. P., Weiss, W. J., and Yang, W. (1998). “Shrinkage cracking—Can it be prevented?” Concr. Int., 20(4), 51–55.
Spragg, R. P., Castro, J., Li, W., Pour-Ghaz, M., Huang, P.-T., and Weiss, J. (2011). “Wetting and drying of concrete using aqueous solutions containing deicing salts.” Cem. Concr. Compos., 33(5), 535–542.
Tang, L., and Gulikers, J. (2007). “On the mathematics of time-dependent apparent chloride diffusion coefficient in concrete.” Cem. Concr. Res., 37(4), 589–595.
Thiery, M., Baroghel-Bouny, V., Bourneton, N., Villain, G. E. R., and Stefani, C. (2007). “Modelling of drying of concrete—Analysis of the different moisture transport models.” Revue Europeenne de Genie Civ., 11(5), 541–577.
Tuller, M., and Or, D. (2005). “Water films and scaling of soil characteristic curves at low water contents.” Water Resour. Res., 41(9), W09403.
van Genuchten, M. T. (1980). “A closed-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J., 44(5), 892–898.
Villani, C. (2014). “Transport processes in partially saturate concrete: Testing and liquid properties.” Ph.D. thesis, Purdue Univ., West Lafayette, IN.
Villani, C., Spragg, R., Pour-Ghaz, M., and Jason Weiss, W. (2014). “The influence of pore solutions properties on drying in cementitious materials.” J. Am. Ceram. Soc., 97(2), 386–393.
Weiss, J., and Berke, N. S. (2003). “ 7.5 admixtures for reduction of shrinkage and cracking.”, 323–335.
Weiss, J., Lura, P., Rajabipour, F., and Sant, G. (2008). “Performance of shrinkage-reducing admixtures at different humidities and at early ages.” ACI Mater. J., 105(5), 478–486.
Weiss, W. J. (1999). “Prediction of early-age shrinkage cracking in concrete elements.” Ph.D. thesis, Northwestern Univ., Evanston, IL.
Weiss, W. J., Yang, W., and Shah, S. P. (1998). “Shrinkage cracking of restrained concrete slabs.” J. Eng. Mech., 765–774.
Zhang, Z., Thiery, M., and Baroghel-Bouny, V. (2015). “Numerical modelling of moisture transfers with hysteresis within cementitious materials: Verification and investigation of the effects of repeated wetting-drying boundary conditions.” Cem. Concr. Res., 68, 10–23.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Oct 31, 2016
Accepted: Feb 16, 2017
Published online: May 31, 2017
Published in print: Sep 1, 2017
Discussion open until: Oct 31, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.