Microencapsulated Sunflower Oil for Rejuvenation and Healing of Asphalt Mixtures
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 9
Abstract
Microencapsulation of rejuvenators was introduced as a new approach to increase the efficiency of rejuvenators toward improving the self-healing rate of asphalt pavement. This study had two primary objectives: (1) to examine the thermal stability of prepared microcapsules containing sunflower oil as core material, and (2) to evaluate the effect of the microcapsule in increasing the self-healing ability of asphalt mixtures. Results showed an acceptable thermal stability of double-walled polyurethane and urea-formaldehyde (PU/UF) microcapsules in the temperature range encountered during mix production. Furthermore, asphalt binder stiffness and m-value measurements demonstrated that microcapsules were successful in decreasing low-temperature stiffness and increasing the m-value of the binder blends. Healing of the cracks defined by reversal of the crack opening was validated in all mixtures through digital image analysis. The mixtures containing sunflower oil as a rejuvenator showed the best performance in self-healing efficiency. However, the healing efficiency of the mix with microcapsules was lower than the mixture with the rejuvenator. This is possibly because of the amount of rejuvenator released from the microcapsules, which was limited to the microcapsules around the crack and not all the rejuvenator available in the mix. The samples healed at room temperature showed higher healing efficiency, compared with the specimens in the oven. The difference in healing efficiency between the two healing conditions (room temperature versus oven temperature) was the largest at Day 1; however, the difference became less pronounced with the progression of healing.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the laboratory support from the Louisiana Transportation Research Center (LTRC) and the TGA work in the frame of the USDA S-1041 program.
References
AASHTO. (2016). “Determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR).” AASHTO T 313–12, Washington, DC.
Arshady, R. (1999). Microspheres, microcapsules and liposomes, volume 1: Preparation and chemical applications, volume 2: Medical and biotechnology applications, Citus, London.
Barrasaa, R. C., Lópeza, V. B., Montoliua, C., Ibáñezb, V., Pedrajasc, V., and Santarénd, J. (2014). “Addressing durability of asphalt concrete by self-healing mechanism.” Procedia Soc. Behav. Sci., 162, 188–197.
Blaiszik, B., Caruso, M., Mcilroy, D., Moore, J., White, S., and Sottos, N. (2009). “Microcapsules filled with reactive solutions for self-healing materials.” Polymer, 50(4), 990–997.
Brown, E. (1988). “Preventative maintenance of asphalt concrete pavements.” National center for asphalt technology, Auburn Univ., Auburn, AL.
Brown, E. N., Kessler, M. R., Sottos, N. R., and White, S. R. (2003). “In situ poly (urea-formaldehyde) microencapsulation of dicyclopentadiene.” J. Microencapsulation, 20(6), 719–730.
Caruso, M. M., Blaiszik, B. J., White, S. R., Sottos, N. R., and Moore, J. S. (2008). “Full recovery of fracture toughness using a nontoxic solvent-based self-healing system.” Adv. Funct. Mater., 18(13), 1898–1904.
Cosco, S., Ambrogi, V., Musto, P., and Carfagna, C. (2007). “Properties of poly (ureaformaldeide) microcapsules containing an epoxy resin.” J. Appl. Polym. Sci., 105(3), 1400–1411.
Fasina, O. O., and Colley, Z. (2008). “Viscosity and specific heat of vegetable oil as a function of temperature: 35°C to 180°C.” Int. J. Food Prop., 11(4), 738–746.
García, A., Schlangen, E., van de Ven, M., and Sierra-Beltrán, G. (2010). “Preparation of capsules containing rejuvenators for their use in asphalt concrete.” J. Hazard. Mater., 184(1–3), 603–611.
Hwang, J. S., et al. (2006). “Preparation and characterization of melamine-formaldehyde resin microcapsules containing fragrant oil.” Biotechnol. Bioprocess Eng., 11(4), 332–336.
Kamphaus, J. M., Rule, J. D., Moore, J. S., Sottos, N. R., and White, S. R. (2008). “A new self-healing epoxy with tungsten(VI) chloride catalyst.” J. R. Soc. Interface, 5(18), 95–103.
Karlsson, R., and Isacsson, U. (2006). “Material-related aspects of asphalt recycling—State of the art.” J. Mater. Civil Eng., 81–92.
Keller, M. W., and Sottos, N. R. (2006). “Mechanical properties of microcapsules used in a selfhealing polymer” Exp. Mech., 46(6), 725–733.
Kim, B., and Roque, R. (2006). “Evaluation of healing property of asphalt mixture.” Transp. Res. Rec., 1970, 84–91.
Little, D. N., and Bhasin, A. (2007). “Exploring mechanisms of healing in asphalt mixtures and quantifying its impact.” Self healing materials an alternative approach to 20 centuries of materials science, S. van der Zwaag, ed., Vol. 100, Springer, Netherlands, 205–218.
Little, D. N., Lytton, R. L., Williams, A. D., and Chen, C. W. (2001). “Micro-damage healing in asphalt and asphalt concrete, volume I: Micro-damage and micro-damage healing.”, Texas Transportation Institution, College Station, TX.
Louisiana Department of Transportation and Development. (2006). Louisiana standard specifications for roads and bridges, Baton Rouge, LA.
Maillard, S., de La Roche, C., Hammoum, F., Gaillet, L., and Such, C. (2004). “Experimental investigation of fracture and healing at pseudo-contact of two aggregates.” Proc., 3rd Euroasphalt and Eurobitume Congress, European Asphalt Pavement Association and Eurobitume, Vienna, Austria.
Mookhoek, S. D., Colver, P. J., Fischer, H., Bon, S. A. F., and van der Zwaag, S. (2007). “The creation of high aspect ratio capsules to improve the efficiency of self-healing polymer systems.” 1st Int. Conf. on Self Healing, A. J. M. Schmets, and S. Zwaag, eds., Springer, Netherlands.
Peters, G. H., Schaab, C. K., Hilbelink, R. D., and Davis, T. R. (1971). Development of multipurpose capsular adhesive systems, Defense Technical Information Center, Fort Belvoir, VA.
Petersen, J. C. (2009). A review of the fundamentals of asphalt oxidation: Chemical, physicochemical, physical property, and durability relationships, Transportation Research Board, Washington, DC.
Petersen, J. C., and Harnsberger, P. M. (1998). “Asphalt aging: Dual oxidation mechanism and its interrelationships with asphalt composition and oxidative age hardening.” Transp. Res. Rec., 1638(1), 47–55.
Petersen, J. C., Harnsberger, P. M., and Robertson, R. E. (1996). “Factors affecting the kinetics and mechanisms of asphalt oxidation and the relative effects of oxidation products on age hardening.” Am. Chem. Soc. Div. Fuel Chem. Prepr., 41(4), 1232–1244.
Pronk, A. C. (2006). “Partial healing, a new approach for the damage process during fatigue testing of asphalt specimen.” Symp. on Mechanics of Flexible Pavements, Geo-Institute, ASCE, Reston, VA.
Qiu, J., van de Ven, M. F. C., Wu, S., and Yu, J. (2012). “Investigation of self healing behaviour of asphalt mixes using beam on elastic foundation setup.” J. Mater. Struct., 45(5), 777–791.
Schlangena, E., and Sangadji, S. (2013). “Addressing infrastructure durability and sustainability by self healing mechanisms: Recent advances in self healing concrete and asphalt.” Procedia Eng., 54, 39–57.
Shirzad, S., Hassan, M., Aguirre, M. A., Daly, W. H., and Mohammad, L. N. (2016). “Evaluation of sunflower oil as a rejuvenator and its microencapsulation as a healing agent.” J. Mater. Civ. Eng., 04016116.
Su, J., Wang, L., and Ren, L. (2005). “Fabrication and thermal properties of microPCMs: Used melamine-formaldehyde resin as shell material.” J. Appl. Polymer Sci., 101(3), 1522–1528.
Su, J. F., Qiu, J., and Schlangen, E. (2013). “Stability investigation of self-healing microcapsules containing rejuvenator for bitumen.” Polym. Degrad. Stab., 98(6), 1205–1215.
Su, J. F., Wang, Y. Y, Han, N., Yang, P., and Han, S. (2016). “Experimental investigation and mechanism analysis of novel multi-self-healing behaviors of bitumen using microcapsules containing rejuvenator.” Constr. Build. Mater., 106, 317–329.
Sunflower Seed Oil. (2017). “Material safety data sheet.” ⟨https://www.sciencelab.com/msds.php?msdsId=9927377⟩ (Jan. 27, 2017).
Wanga, Y., Wena, Y., Zhao, K., Chong, D., and Wongb, A. (2014). “Evolution and locational variation of asphalt binder aging in long-life hot-mix asphalt pavements.” Constr. Build. Mater., 68, 172–182.
White, S. R., et al. (2001). “Autonomic healing of polymer composites.” Nature, 409(6822), 794–797.
Willis, J. R., and Turner, P. (2016). “Characterization of asphalt binder extracted from reclaimed asphalt shingles.”, Auburn, AL.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Nov 8, 2016
Accepted: Feb 27, 2017
Published online: Jun 2, 2017
Published in print: Sep 1, 2017
Discussion open until: Nov 2, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.