Dynamic Properties of Fly Ash
Publication: Journal of Materials in Civil Engineering
Volume 29, Issue 1
Abstract
Due to the ever-increasing demand for electricity, generation of fly ash in large quantities has become a problem throughout the world. The utilization of fly ash in rail and road embankments in earthquake-prone areas requires thorough understanding of its dynamic strength characteristics. A series of resonant column and cyclic triaxial tests have been carried out on fly ash to investigate the influence of various factors on its maximum dynamic shear modulus () and dynamic damping (). Correlations for predicting and for fly ash have been proposed. The fly ash is found to be far more liquefiable than sand. The particle-size distribution and low unit weight play a vital role in the determination of cyclic strengths. The dynamic shear damping is found to be very much influenced by the confining pressure and induced strain, but independent of the relative density of the fly ash. The damping of sand is found to be always more than the damping of the fly ash irrespective of the confining pressure.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (2011a). “Standard practice for classification of soils for engineering purposes (unified soil classification system).” ASTM D2487-11, West Conshohocken, PA.
ASTM. (2011b). “Standard test method for load controlled cyclic triaxial strength of soil.” ASTM D5311-11, West Conshohocken, PA.
ASTM. (2015). “Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete.” ASTM C618-15, West Conshohocken, PA.
Boominathan, A., and Hari, S. (2002). “Liquefaction strength of fly ash reinforced with randomly distributed fibers.” Soil Dyn. Earthquake Eng., 22(9-12), 1027–1033.
Das, A., Jayashree, C., and Viswanadham, B. V. S. (2009). “Effect of randomly distributed geofibers on the piping behaviour of embankments constructed with fly ash as a fill material.” Geotext. Geomembr., 27(5), 341–349.
Dhadse, S., Kumari, P., and Bhagia, L. J. (2008). “Fly ash characterization, utilization and government initiatives in India: A review.” J. Sci. Ind. Res., 67(1), 11–18.
Digioia, A. M., and Nuzzo, W. L. (1972). “Fly ash as structural fill.” J. Energy Eng., 98(1), 77–92.
Erdal, C. (2001). “Uses of Class C fly ashes for the stabilization of an expansive soil.” J. Geotech. Geoenviron. Eng., 568–573.
Erdem, O., Tuncer, B., Craig, H., and Ahmet, H. (2011). “Stabilization of organic soils with fly ash.” J. Geotech. Geoenviron. Eng., 819–833.
Ferreira, C., Ribeiro, A., and Ottosen, L. (2003). “Possible applications for municipal solid waste fly ash.” J. Hazard. Mater., 96(2), 201–216.
Ghosh, A., and Subbarao, C. (2007). “Strength characteristic of Class F fly ash modified with lime and gypsum.” J. Geotech. Geoenviron. Eng., 757–766.
Ghosh, R. K., Chadda, L. R., Pant, C. S., and Sharma, R. K. (1973). “Stabilization of alluvial soil with lime and fly ash.” J. Indian Roads Congr., 35(2), 489–511.
Hardin, B. O. (1965). “The nature of damping in sands.” J. Soil Mech. Found. Div., 91(1), 63–95.
Hardin, B. O. (1978). “The nature of stress-strain behaviour for soils.” Proc., Earthquake Engineering and Soil Dynamics, Vol. 1, ASCE, Reston, VA, 3–90.
Indraratna, B., and Nutalaya, P. (1991). “Engineering behaviour of a low carbon, pozzolanic fly ash and its potential as a construction fill.” Can. Geotech. J., 28(4), 542–555.
Jakka, R. S., Datta, M., and Ramana, G. V. (2010). “Liquefaction behaviour of loose and compacted pond ash.” Soil Dyn. Earthquake Eng., 30(7), 580–590.
Joshi, R. C., Duncan, D. M., and McMaster, H. M. (1975). “New and conventional engineering uses of fly ash.” Transp. Eng. J., 101(4), 791–806.
Kaniraj, R., and Gayathri, V. (2004). “Permeability and consolidation characteristics of compacted fly ash.” J. Energy Eng., 18–43.
Kaniraj, R., and Vasant, G. (2001). “Behavior of cement-stabilized fiber-reinforced fly ash-soil mixtures.” J. Geotech. Geoenviron. Eng., 574–584.
Kim, B., Prezzi, M., and Salgado, R. (2005). “Geotechnical properties of fly and bottom ash mixtures for use in highway embankments.” J. Geotech. Geoenviron. Eng., 914–924.
Kramer, S. L. (1996). Geotechnical earthquake engineering, Prentice-Hall, Englewood Cliffs, NJ, 653.
Lo, S. R., and Wardani, S. P. R. (2002). “Strength and dilatancy of a silt stabilized by a cement and fly ash mixture.” Can. Geotech. J., 39(1), 77–89.
Madhyannapu, R. S., Madhav, M. R., Puppala, A. J., and Ghosh, A. (2008). “Compressibility and collapsibility characteristics of sedimented fly ash beds.” J. Mater. Civ. Eng., 401–409.
Mohanty, S., and Chugh, Y. (2006). “Postconstruction environmental monitoring of a fly ash-based road subbase.” Pract. Periodicals Struct. Des. Constr., 238–246.
Porbaha, A., Pradhan, T. B. S., and Yamane, N. (2000). “Time effect on shear strength and permeability of fly ash.” J. Energy Eng., 15–31.
Pornkasem, J., Narongrit, J., Sompote, Y., and Somchai, C. (2010). “Influence of fly ash on unconfined compressive strength of cement-admixed clay at high water content.” J. Mater. Civ. Eng., 49–58.
Saxena, S. K., and Reddy, K. R. (1989). “Dynamic moduli and damping ratio for Monterey No. 0 sand by resonant column tests.” Soils Found., 29(2), 37–51.
Sivakumar Babu, G. L., and Raja Jaladurgam, M. E. (2014). “Strength and deformation characteristics of fly ash with randomly distributed plastic waste.” J. Mater. Civ. Eng., 04014093.
Tatsuoka, F., Iwasaki, T., and Takagi, Y. (1978). “Hysteretic damping of sands under cyclic loading and its relation to shear modulus.” Soils Found., 18(2), 25–40.
Toth, P. S., Chan, H. T., and Cragg, C. B. (1988). “Coal ash as a structural fill with special reference to Ontario experience.” Can. Geotech. J., 25(4), 694–704.
Tuncer, B., Hector, A., and Craig, H. (2006). “Stabilizing soft fine grained soils with fly ash.” J. Mater. Civ. Eng., 283–294.
Vasquez, E., and Alonso, E. E. (1981). “Fly ash stabilization of decomposed granite.” Proc., 10th Int. Conf. on Soil Mechanics and Foundations Engineering, Stockholm, Sweden, 391–395.
Xenaki, V. C., and Athanasopoulos, G. A. (2003). “Liquefaction resistance of sand-silt mixture: An experimental investigation of the effect of fines.” Soil Dyn. Earthquake Eng., 23(3), 1–12.
Zand, B., Tu, W., Amaya, P. J., Wolfe, W. E., and Butalia, T. S. (2009). “An experimental investigation on liquefaction potential and post-liquefaction shear strength of impounded fly ash.” Fuel, 88(7), 1160–1166.
Zhang, J., Andrus, D., and Juang, C. (2005). “Normalized shear modulus and material damping ratio relationships.” J. Geotech. Geoenviron. Eng., 453–464.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Nov 30, 2015
Accepted: Jun 14, 2016
Published online: Aug 10, 2016
Published in print: Jan 1, 2017
Discussion open until: Jan 10, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.