Mechanical Properties of Polyester Coated Fabric Subjected to Biaxial Loading
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 11
Abstract
The paper is focused on the comparison between uniaxial and biaxial laboratory test results for polyester coated fabric. A short literature review concerning coated woven fabrics with emphasis on biaxial tensile tests is presented. A description of the polyester-coated fabric under biaxial test by means of constitutive models and material parameter values is proposed. To establish the right values of the ultimate tensile strength, flat and curved grips are tested.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the National Science Centre, Poland (Grant No. UMO-2011/03/B/ST8/06500), for financial support of the research.
References
Ambroziak, A., and Kłosowski, P. (2011). “Review of constitutive models for technical woven fabrics in finite element analysis.” AATCC Rev., 5–6, 58–67.
Ambroziak, A., and Kłosowski, P. (2014a). “Influence of thermal effects on mechanical properties of PVDF-coated fabrics.” J. Reinf. Plast. Compos., 33(7), 663–673.
Ambroziak, A., and Kłosowski, P. (2014b). “Mechanical properties for preliminary design of structures made from PVC coated fabric.” Construct. Build. Mater., 50(1), 74–81.
Ambroziak, A., and Kłosowski, P. (2014c). “Mechanical properties of polyvinyl chloride-coated fabrics under cyclic tests.” J. Reinf. Plast. Compos., 33(3), 225–234.
ASTM. (2011). “Standard test methods for coated fabrics.” D751, West Conshohocken, PA.
Bigaud, D., Szostkiewicz, C., and Hamelin, P. (2003). “Tearing analysis for textile reinforced soft composites under mono-axial and bi-axial tensile stresses.” Compos. Struct., 62(2), 129–137.
Branicki, Cz., and Kłosowski, P. (1983). “Statical analysis of hanging textile membranes in nonlinear approach.” Arch. Civ. Eng., 29(3), 189–220 (in Polish).
Bridgens, B. N., and Gosling, P. D. (2004). “Direct stress-strain representation for coated woven fabric.” Compos. Struct., 82(23–26), 1913–1927.
Bridgens, B. N., Gosling, P. D., Jou, G.-T., and Hsu, X.-Y. (2012). “Inter-laboratory comparison of biaxial tests for architectural textiles.” J. Text. Inst., 103(7), 706–718.
Chen, J., Hou, H., and Chen, W. (2012). “Study on deformation performance of PVC membrane materials under biaxial cyclic tensile loads.” Adv. Mater. Res., 479-481, 36–40.
Day, A. S. (1986). “Stress strain equations for non-linear behaviour of coated woven fabrics.” Proc., Symp. on Shells, Membranes and Space Frames, K. Heki, ed., Elsevier, Amsterdam, Netherlands, 17–24.
Forster, B., and Mollaert, M., eds. (2004). European design guide for tensile surface structures, TensiNet, VUB Press, Brussels, Belgium.
Galliot, C., and Luchsinger, R. H. (2009). “A simple model describing the non-linear biaxial tensile behaviour of PVC-coated polyester fabrics for use in finite element analysis.” Compos. Struct., 90(4), 438–447.
Huntington, C. G., ed. (2013). Tensile fabric structures. Design, analysis, and construction, ASCE, Reston, VA.
ISO. (1998). “Rubber- or plastics-coated fabrics—Determination of tensile strength and elongation at break.”, Switzerland, 11.
Kłosowski, P., Komar, W., and Woznica, K. (2009). “Finite element description of nonlinear viscoelastic behaviour of technical fabric.” Constr. Build. Mater., 23(2), 1133–1140.
Kłosowski, P., Zagubień, A., and Woznica, K. (2004). “Investigation on rheological properties of technical fabric ‘Panama’.” Arch. Appl. Mech., 73(9–10), 661–681.
Lewis, W. (2013). “Modeling of fabric structures and associated design issues.” J. Archit. Eng., 81–88.
Luo, Y., and Hu, H. (2009). “Mechanical properties of PVC coated bi-axial warp knitted fabric with and without initial crack under multi-axial tensile loads.” Compos. Struct., 89(4), 536–542.
Mehler Texnologies. (2014). “Polymar FR 8540.” 〈http://www.mehler-texnologies.com/EN/download/tarpaulin/polymartraffic/Datenblatt_FRcolor8540.pdf〉 (Sep. 17, 2014).
Ni, J., Luo, R.-A., Chen, Y.-L., and Chen, S.-H. (2009). “Characteristics of architectural membrane materials under biaxial tensile loads.” Eng. Mech., 26(6), 100–104.
Reinhardt, H. W. (1976). “On the biaxial testing and strength of coated fabrics.” Exp. Mech., 16(2), 71–74.
Taylor, J. R. (1997). An introduction to error analysis, Univ. Science Books, Sausalito, CA.
Żerdzicki, K., Kłosowski, P., and Woznica, K. (2014). “Application of the Bodner-Partom constitutive equations for modelling the technical fabric Valmex used for the hanging roof of the Forest Opera in Sopot.” Shell structures: Theory and applications, W. Pietraszkiewicz and J. Gorski, eds., Vol. 3, Taylor & Francis, London, 579–582.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jul 9, 2014
Accepted: Dec 29, 2014
Published online: Feb 10, 2015
Discussion open until: Jul 10, 2015
Published in print: Nov 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.