Estimation of Resilient Modulus of Unbound Aggregates Using Performance-Related Base Course Properties
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 6
Abstract
This study aims at developing an accurate and efficient methodology to estimate the resilient modulus of unbound aggregates. First, a new resilient modulus model is proposed to incorporate the moisture dependence of the resilient modulus in addition to the stress dependence in existing models. Second, prediction models are developed to conveniently and accurately determine the coefficients in the proposed model. In order to characterize the moisture dependence of unbound aggregates, the degree of saturation and the matric suction parameter are added into the proposed model. The soil-water characteristic curve (SWCC) is used to determine the matric suction value at any given moisture content. The moisture dependence of the model is validated for selected materials with different moisture contents. In order to develop prediction models for the coefficients in the proposed model, laboratory experiments and multiple regression analysis are conducted on 20 different base course materials. The laboratory experiments include the improved repeated load triaxial test and tests to measure performance-related base course properties. A new test protocol is developed for the improved repeated load triaxial test, which is better adapted to the stress state of the base course under the actual traffic load than the current test protocols. A series of repeatable and performance-related base course properties are measured and used to develop the prediction models based on multiple regression analysis. These newly proposed properties include methylene blue value (MBV), percent fines content (pfc), gradation of particle sizes, and shape, angularity, and texture of aggregates. The developed prediction models have higher -squared values than those using other base course properties.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The Texas Department of Transportation (TxDOT) provided financial support for this study through TxDOT Project 0-6621 under the direction of Jon Epps. The authors gratefully acknowledge the help and support of Stephen Sebesta, Bailey Hewes, and Sang Ick Lee from Texas A&M Transportation Institute during the study.
References
AASHTO. (2003). “Standard method of test for resilient modulus of subgrade soils and untreated base/subbase materials.”, Washington, DC.
AASHTO. (2007). “Standard method of test for the qualitative detection of harmful clays of the smectite group in aggregates using methylene blue.”, American Association of State Highway and Transportation Officials, Washington, DC.
AASHTO. (2008). “Mechanistic-empirical pavement design guide: A manual of practice.” AASHTO Designation: MEPDG-1, Washington, DC.
Andrei, D., Witczak, M. W., Schwartz, C. W., and Uzan, J. (2004). “Harmonized resilient modulus test method for unbound pavement materials.”, Transportation Research Board, Washington DC, 29–37.
Ashtiani, R. (2009). “Anisotropic characterization and performance prediction of chemically and hydraulically bounded pavement foundations.” Ph.D. dissertation, Texas A&M Univ., College Station, TX.
ASTM (2010). “Standard test method for measurement of soil potential (suction) using filter paper.”, West Conshohocken, PA.
Cary, C., and Zapata, C. (2011). “Resilient modulus for unsaturated unbound materials.” Road Mater. Pavement Des., 12(3), 615–638.
Epps, J., et al. (2014). “Development of a specification for flexible base construction.”, Texas A&M Transportation Institute, College Station, TX.
Fredlund, D. G., and Xing, A. (1994). “Equations for the soil-water characteristic curve.” Can. Geotech. J., 31(4), 521–532.
Heath, A. C., Pestana, J. M., Harvey, J. T., and Bejerano, M. O. (2004). “Normalizing behavior of unsaturated granular pavement materials.” J. Geotech. Geoenviron. Eng., 896–904.
Lekarp, F., Isacsson, U., and Dawson, A. (2000). “State of the art. I: Resilient response of unbound aggregates.” J. Transp. Eng., 66–75.
Liang, R. Y., Rabab’ah, S., and Khasawneh, M. (2008). “Predicting moisture-dependent resilient modulus of cohesive soils using soil suction concept.” J. Transp. Eng., 34–40.
Lytton, R. L. (1995). “Foundations and pavements on unsaturated soils.” Proc., 1st Int. Conf. on Unsaturated Soils, Vol. 3, International Society of Soil Mechanics and Foundation Engineering, Paris, 1201–1220.
Malla, R. B., and Joshi, S. (2007). “Resilient modulus prediction models based on analysis of LTPP data for subgrade soils and experimental verification.” J. Transp. Eng., 491–504.
Masad, E. A. (2005). “Aggregate imaging system (AIMS): Basics and applications.”, Texas A&M Transportation Institute, College Station, TX.
Montgomery, D., and Runger, G. (2007). Applied statistics and probability for engineers, 4th Ed., Wiley, Hoboken, Netherlands.
National Cooperative Highway Research Program (NCHRP). (2003). “Harmonized test methods for laboratory determination of resilient modulus for flexible pavement design.”, Washington, DC.
Nazzal, M. D., and Mohammad, L. N. (2010). “Estimation of resilient modulus of subgrade soils for design of pavement structures.” J. Mater. Civ. Eng., 726–734.
Pan, T., Tutumluer, E., and Anochie-Boateng, J. (2006). “Aggregate morphology affecting resilient behavior of unbound granular materials.”, Transportation Research Board, Washington, DC, 12–20.
Sahin, H. (2011). “Characterization of expansive soil for retaining wall design.” M.S. thesis, Texas A&M Univ., College Station, TX.
Tutumluer, E., Little, D., and Kim, S. (2003). “Validated model for predicting field performance of aggregate base courses.”, Transportation Research Board, Washington, DC, 41–49.
Tutumluer, E., and Pan, T. (2008). “Aggregate morphology affecting strength and permanent deformation behavior of unbound aggregate materials.” J. Mater. Civ. Eng., 617–627.
Uzan, J. (1985). “Characterization of granular material.”, Transportation Research Board, Washington, DC, 52–59.
Yau, A., and Quintus, H. L. (2004). “Predicting elastic response characteristics of unbound materials and soils.”, Transportation Research Board, Washington, DC, 47–56.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jan 21, 2014
Accepted: Jun 16, 2014
Published online: Aug 14, 2014
Discussion open until: Jan 14, 2015
Published in print: Jun 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.