Feasibility Study on Bisphenol A as Phenol Replacement to Produce Aminosulfonate-Phenol-Formaldehyde Superplasticizer for Application in Concrete
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 6
Abstract
In this study, phenol was replaced by a powdery bisphenol A to produce aminosulfonate -phenol-formaldehyde (ASPF) superplasticizer (SP); ASPF SP and aminosulfonate-bisphenol A- formaldehyde (ASBF) SP were prepared. ASPF and ASBF SPs have , ─OH, , , functional groups, the weight-average molecular weight of 17.22 and 18.61 kDa, respectively, and the average polydispersity index of 1.08 and 1.53, respectively. The cement particle surface with ASPF SP has a higher initial zeta potential than that with ASBF SP. Along with time, the zeta potential of the cement particle surface with ASPF and ASBF SPs of change from and , respectively, in initial time, to and , respectively, after 120 min. ASPF SP exhibits a higher water reduction percentage than ASBF SP. The concrete with ASPF SP has a higher slump loss rate and mechanical properties than that with ASBF SP. The air content, wet density, and setting times of cement pastes with ASPF and ASBF SPs have no differences. It is an effective method to produce ASPF SP in a cleaner process.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank Min Deng, Professor of Nanjing University of Technology; his sponsorship and support made this study possible.
References
Aitcin, P. C., and Mao, B. (1992). “How to make high performance concrete.” Proc., Second Seminar on High Performance Concrete, J. C. Chern, ed., China Construction Society, Taipei, Taiwan, China, 91–118.
BS EN. (2000a). “Cement. Composition, specifications and conformity criteria for common cements.” BS EN 197 Part 1, British Standards Institution, U.K.
BS EN. (2000b). “Testing fresh concrete: Air content-pressure methods.” BS EN 12350 Part 7, British Standards Institution, U.K.
BS EN. (2000c). “Testing fresh concrete. Density.” BS EN 12350 Part 6, British Standards Institution, U.K.
BS EN. (2000d). “Testing hardened concrete flexural strength of test specimens.” BS EN 12390 Part 5, British Standards Institution, U.K.
BS EN. (2000e). “Testing hardened concrete. Method of determination of compressive strength of concrete cubes.” BS EN 12390 Part 3, British Standards Institution, U.K.
BS EN. (2000f). “Testing fresh concrete. Slump test.” BS EN 12350 Part 2, British Standards Institution, U.K.
BS EN. (2005). “Methods of testing cement. Determination of setting time and soundness.” BS EN 196 Part 3, British Standards Institution, U.K.
Collepard, M., and Valente, M. (2006). “Recent developments in superplasticizers.” Eighth CANMET/ACI Int. Conf.: Superplasticizers and Other Chemical Admixtures in Concrete, American Concrete Institute, Detroit, MI, 1–9.
Giger, W., Gabriel, F. L., Niels, J. P., and Wettstein, F. E. (2009). “Environmental fate of phenolic endocrine disruptors: Field and laboratory studies.” Phil. Trans. R. Soc. A., 367(1904), 3941–3963.
GOST. (1999). “Concretes. Methods for strength determination using reference specimens.” GOST10180, Gosudarstvennye Standarty State Standard GOST, Russian.
Ji, D., Luo, Z. Y., He, M., Shi, Y. J., and Gu, X. L. (2012). “Effect of both grafting and blending modifications on the performance of lignosulphonate-modified sulphanilic acid-phenol- formaldehyde condensates.” Cem. Concr. Res., 42(9), 1199–1206.
Kilinçkale, F. M., and Dogan, G. G. J. (2007). “Performance of concretes produced with superplasticizers.” J. Appl. Polym. Sci., 103(5), 3214–3219.
Lucia, F., Josef, K., Frank, W., and Johann, P. (2010). “Interaction of cement model systems with superplasticizers investigated by atomic force microscopy, zeta potential, and adsorption measurements.” J. Colloid. Interf. Sci., 347(1), 15–24.
Ouyang, X. P., Jiang, X. Y., Qiu, X. Q., Yang, D. J., and Pang, Y. X. (2009). “Effect of molecular weight of sulfanilic acid-phenol-formaldehyde condensate on the properties of cementitious system.” Cem. Concr. Res., 39(4), 283–288.
Paillere, A. M. (1996). Application of admixtures in concrete, E & FN Spon, London, 56–68.
Pei, M. S., Wang, D. J., Hu, X. B., and Xu, D. F. (2000). “Synthesis of sodium sulfanilate-phenol- formaldehyde condensate and its application as a superplasticizer in concrete.” Cem. Concr. Res., 30(11), 1841–1845.
Rosana, M. N., de Assuncao, R., Betina, R., Oliveira, J. S., and Rodrigues Filho, G. (2005). “Synthesis, characterization, and application of the sodium poly (styrenesulfonate) produced from waste polystyrene cups as an admixture in concrete.” J. Appl. Polym. Sci., 96(5), 1534–1538.
Szwabowski, J., and Łazniewska-Piekarczyk, B. (2009). “Air-entrainment problem in self-compacting concrete.” J. Civ. Eng. Manage., 15(2), 137–147.
Ye, Y. S., Huang, H. L., and Hsu, K. C. (2006). “A water-soluble acrylate/sulfonate copolymer. I. Its synthesis and dispersing ability on cement.” J. Appl. Polym. Sci., 100(3), 2490–2496.
Yoshioka, K., Tazawa, E. L., Kawai, K., and Enohata, T. (2002). “Adsorption characteristics of superplasticizers on cement component minerals.” Cem. Concr. Res., 32(10), 1507–1513.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Nov 22, 2013
Accepted: Jun 5, 2014
Published online: Aug 13, 2014
Discussion open until: Jan 13, 2015
Published in print: Jun 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.