Mechanical Properties of Sandy Soil Stabilized with Modified Sulfur
Publication: Journal of Materials in Civil Engineering
Volume 27, Issue 4
Abstract
Alternative sulfur management solutions are of great interest to scientists and engineers due to the increase in the world’s sulfur product. Although use of by-product sulfur as a binder in concrete has been addressed in previous reports, almost no work has been done to investigate the potential use of by-product sulfur as stabilizer agent for soil. This paper presents the geotechnical characteristics of sandy soil form the southern Caspian Sea Coastal Area of Mazandaran State, Iran, stabilized with modified sulfur. Specimens cured up to 180 days and unconfined compression and direct shear tests were performed. Unconfined compression strength and direct shear parameters increased, depending on modified sulfur content and curing period. Empirical relationships are proposed to estimate the unconfined compressive strength and direct shear parameters. Our results showed that a modified sulfur agent has considerable influence on the physical characteristics of soil. Sulfur may be employed as soil stabilizer in civil engineering construction fields.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to appreciate the helpful assistances provided by laboratory staff in Civil Engineering Department of Babol Noshirvani University of Technology. Thanks go to Mr. S. M. Zarghami for allowing us to work on SMZ sulfur modifier.
References
Abdel-Jawad, Y., and Al-Qudah, M. (1994). “The combined effect of water and temperature on the strength of sulfur concrete.” Cem. Concr. Res., 24(1), 165–175.
Ali, F. H., Adnan, A., and Choy, C. K. (1992). “Geotechnical properties of a chemically stabilized soil from Malaysia with rice husk ash as an additive.” Geotech. Geol. Eng., 10(2), 117–134.
American Concrete Institute (ACI). (1988). “Guide for mixing and placing sulfur concrete in construction.” ACI Mater. J., 85(4), 314–325.
Anwar Hossain, K. (2011). “Stabilized soils incorporating combinations of rice husk ash and cement kiln dust.” J. Mater. Civ. Eng., 1320–1327.
Arora, S., and Aydilek, A. H. (2005). “Class F fly-ash-amended soils as highway base materials.” J. Mater. Civ. Eng., 640–649.
ASTM. (2000a). “Standard test method for direct shear test of soils under consolidated drained conditions.” D3080, West Conshohocken, PA.
ASTM. (2000b). “Standard test method for unconfined compressive strength of cohesive soil.” D2166, West Conshohocken, PA.
ASTM. (2000c). “Standard test methods for laboratory compaction characteristics of soil using standard effort.” D698, West Conshohocken, PA.
Baghdadi, Z. A., and Rahman, M. D. A. (1990). “The potential of cement kiln dust for the stabilization of dune sand in highway construction.” Build. Environ., 25(4), 285–289.
Basha, E. A., Hashim, R., Mahmud, H. B., and Muntohar, A. S. (2005). “Stabilization of residual soil with rice husk ash and cement.” Constr. Build. Mater., 19(6), 448–453.
Çokça, E. (2001). “Use of class C fly ashes for the stabilization of an expansive soil.” J. Geotech. Geoenviron. Eng., 568–573.
Czarnecki, B., and Gillott, J. E. (1990). “Effect of different admixtures on the durability of sulphur concrete made with different aggregates.” Eng. Geol., 28(1–2), 105–118.
Edil, T., Acosta, H., and Benson, C. (2006). “Stabilizing soft fine-grained soils with fly ash.” J. Mater. Civ. Eng., 283–294.
Enayaty-Ahangar, T., and Motahari, S. (2014). “Fiber reinforcement of DCPD modified sulfur mortar.” J. Mater. Civ. Eng., 1–5.
Grugel, R. N. (2012). “Integrity of sulfur concrete subjected to simulated lunar temperature cycles.” Adv. Space Res., 50(9), 1294–1299.
Grugel, R. N., and Toutanji, H. (2008). “Sulfur ‘concrete’ for lunar applications—Sublimation concerns.” Adv. Space Res., 41(1), 103–112.
Hewlett, P. C. (2005). Lea's chemistry of cement and concrete, 4th Ed., Butterworth-Heinemann, Oxford.
Hossain, K. M. A., Lachemi, M., and Easa, S. (2007). “Stabilized soils for construction applications incorporating natural resources of Papua New Guinea.” Resour. Conserv. Recycl., 51(4), 711–731.
Maaitah, O. N. (2012). “Soil stabilization by chemical agent.” Geotech. Geol. Eng., 30(6), 1345–1356.
Miller, G. A., and Azad, S. (2000). “Influence of soil type on stabilization with cement kiln dust.” Constr. Build. Mater., 14(2), 89–97.
Miller, G. A., and Zaman, M. (2007). “Field and laboratory evaluation of cement kiln dust as a soil stabilizer.” Transportation Research Record 1714, Transportation Research Board, Washington, DC, 25–32.
Mir, B. A., and Sridharan, A. (2013). “Physical and compaction behaviour of clay soil–fly ash mixtures.” Geotech. Geol. Eng., 31(4), 1059–1072.
Mohamed, A. M. O., and El Gamal, M. (2010). Sulfur concrete for the construction industry: A sustainable development approach, J. Ross Publishing.
Muntohar, A. S. (2011). “Engineering characteristics of the compressed-stabilized earth brick.” Constr. Build. Mater., 25(11), 4215–4220.
Pierce, C. E., Tripathi, H., and Brown, T. W. (2003). “Cement kiln dust in controlled low-strength materials.” ACI Mater. J., 100(6), 455–462.
Prabakar, J., Dendorkar, N., and Morchhale, R. K. (2004). “Influence of fly ash on strength behavior of typical soils.” Constr. Build. Mater., 18(4), 263–267.
Rahman, M. D. A. (1986). “The potentials of some stabilizers for the use of lateritic soil in construction.” Build. Environ., 21(1), 57–61.
U.S. Geological Survey (USGS). (2013). “Mineral commodity summaries 2013: U.S. Geological Survey.” Vol. 198, Reston, VA.
Vlahovic, M. M., Martinovic, S. P., Boljanac, T. D., Jovanic, P. B., and Volkov-Husovic, T. D. (2011). “Durability of sulfur concrete in various aggressive environments.” Constr. Build. Mater., 25(10), 3926–3934.
Vroom, A. H. (1998). “Sulfur concrete goes global.” Concr. Int., 20(1), 68–71.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 26, 2013
Accepted: Feb 11, 2014
Published online: Jul 22, 2014
Discussion open until: Dec 22, 2014
Published in print: Apr 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.