Image-Aided Element Shape Generation Method in Discrete-Element Modeling for Railroad Ballast
Publication: Journal of Materials in Civil Engineering
Volume 26, Issue 3
Abstract
The discrete-element method (DEM) provides more realistic results compared with those of continuum analysis for unbound construction materials such as railroad ballast. This paper introduces a digital-image aided particle-shape generation method for DEM to consider the shape effects of aggregate particles on assembly behavior. The BLOKS3D DEM program is used in this research with the capability of representing angular aggregates as discrete elements with user-defined particle morphological properties from imaging-based shape indices. A three-dimensional (3D) image analysis approach is available to construct discrete elements with shapes close to the morphological properties of actual aggregate shapes. A large-sized shear box is then used in direct-shear tests to validate this image-aided particle-shape generation DEM. The purpose of validation is to match the laboratory test results with the DEM simulation results by using one single set of model parameters. To that end, the sensitivity of DEM model parameters are investigated by conducting DEM shear-box simulations using different combinations of model parameters realistically chosen on the basis of previous research studies. The validation process is finally accomplished by statistically demonstrating that the DEM shear-box simulation results using one set of parameters can predict the laboratory shear-box test results reasonably well under various normal stress levels.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (1999). “Flat particles, elongated particles,or flat and elongated particles in coarse aggregate.” ASTM D4791, West Conshohocken, PA.
ASTM. (2006). “Determining percent of fractured particles in coarse aggregate.” ASTM D5821, West Conshohocken, PA.
Barbosa, R. E. (1990). “Discrete element models for granular materials and rock mass.” Ph.D. thesis, Univ. of Illinois at Urbana Champaign, Champaign, IL.
Cundall, P. A. (1971). “A computer model for simulating progressive, large scale movements in blocky rock systems.” Int. Symposium on Rock Fracture, I.S.R.M., Nancy, France.
Holubec, I., and D’Appolonia, E. (1973). “Effect of particle shape on the engineering properties of granular soils,”, ASTM, West Conshohocken, PA, 304–318.
Housain, Z., Indraratna, B., Darve, F., and Thakur, P. (2007). “DEM analysis of angular ballast breakage under cyclic loading.” Geomech. Geoeng., 2(3), 175–182.
Huang, H. (2009). “Discrete element modeling of railroad ballast using imaging based aggregate morphology characterization.” Ph.D. thesis, Univ. of Illinois at Urbana Champaign, Champaign, IL.
Indraratna, B. (2010). “Experimental and numerical study of railway ballast behavior under cyclic loading.” Int. J. Geomech., 136–144.
Koerner, R. M. (1968). “The behavior of cohesionless soils formed from various minerals.” Ph.D. thesis, Duke Univ., Durham, NC.
Lim, W. L., and McDowell, G. R. (2005). “Discrete element modeling of railway ballast.” Granular Matter, 7(1), 19–29.
Lobo-Guerrero, S., and Vallejo, L. E. (2006). “Discrete element method analysis of rail track ballast degradation during cyclic loading.” Granular Matter, 8(3–4), 195–204.
Marsal, R. J. (1973). “Mechanical properties of rockfill.” Embankment dam engineering, Casagrande volume, R. C. Hirschfeld and S. J. Poulos, eds., Wiley & Sons, New York, 109–200.
Masad, E., Al-Rousan, T., Button, J., Little, D., and Tutumluer, E. (2005). “Test methods for characterizing aggregate shape, texture and angularity.”, National Cooperative Highway Research Program, Washington, DC.
Nezami, E. G., Hashash, Y. M. A., Zhao, D., and Ghaboussi, J. (2007). “Simulation of front end loader bucket-soil interaction using discrete element method.” Int. J. Numer. Anal. Methods Geomech., 31(9), 1147–1162.
Rao, C., Tutumluer, E., and Stefanski, J. A. (2001). “Coarse aggregate shape and size properties using a new image analyzer.” J. Test. Eval., 29(5), 79–89.
Santamarina, J. C., and Cho, G. C. (2004). “Soil behavior: The role of particle shape.” Proc., Skempton Conf., Thomas Telford.
Shen, S. (2006). “Dissipated energy concepts for HMA performance: Fatigue and healing.” Ph.D. thesis, Univ. of Illinois at Urbana Champaign, Champaign, IL.
Vallerga, B. A., Seed, H. B., Monismith, C. L., and Cooper, R. S. (1957). “Effect of shape, size, and roughness of aggregate particles on the strength of granular materials.” Special Tech. Pub. No. 212, ASTM, West Conshohocken, PA.
Zhao, D., Nezami, E. G., Hashash, Y. M. A., and Ghaboussi, J. (2006). “Three-dimensional discrete element simulation for granular materials.” Eng. Comput., 23(7), 749–770.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jan 2, 2013
Accepted: Apr 12, 2013
Published online: Apr 13, 2013
Discussion open until: Sep 13, 2013
Published in print: Mar 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.