Comparison of Thermal Stresses Calculated from Asphalt Binder and Asphalt Mixture Creep Tests
Publication: Journal of Materials in Civil Engineering
Volume 25, Issue 8
Abstract
Low-temperature cracking is a significant distress in asphalt pavements built in the northern United States and Canada. As temperature decreases, thermal stresses develop in the restrained asphalt surface layer; and when the temperature reaches a critical temperature, cracking occurs. The current guides use thermal stress as a critical input parameter in the low-temperature performance model. In this paper, statistical and graphical analyses are performed to compare thermal stresses that develop in an idealized asphalt pavement calculated from mixture creep data obtained using indirect tensile test (IDT) and bending beam rheometer (BBR) test. In addition, the idea of obtaining thermal stresses from binder BBR creep data is further investigated. Thermal stresses calculated using IDT and BBR mixture creep data, respectively, are similar. Thermal stresses calculated from binder creep data are significantly different than thermal stresses calculated from mixture creep data. The effect of physical hardening is investigated for a limited number of materials, and the effect on thermal stresses is significant.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The partial support provided by Minnesota Department of Transportation is gratefully acknowledged.
References
AASHTO. (2002). “Standard specification for performance graded (PG) asphalt binder.” AASHTO provisional standards, MP1a-02, Washington, DC.
AASHTO. (2003). “Standard method of test for determining the creep compliance and strength of hot-mix asphalt (HMA) using the indirect tensile test device.” Standard specifications for transportation materials and methods of sampling and testing, Part 2B: Tests, T322-03, 22nd Ed., Washington, DC.
AASHTO. (2005). “Standard method of test for determining the flexural creep stiffness of asphalt binder using the bending beam rheometer (BBR).” Standard specifications for transportation materials and methods of sampling and testing, T313-05, 25th Ed., Washington, DC.
AASHTO. (2008). “Mechanistic-empirical pavement design guide, interim edition: A manual of practice.” American Association of State Highway and Transportation Officials (AASHTO), Washington, DC.
Anderson, D. A., and Marasteanu, M. O. (1999). “Physical hardening of asphalt binders relative to their glass transition temperatures.” Transportation Research Record 1661, Transportation Research Board, Washington, DC, 27–34.
Basu, A. (2002). “An evaluation of the time-temperature equivalence factor and of the physical hardening effects on low-temperature asphalt binder specifications.” M.S. thesis, Civil Engineering, Univ. of Minnesota, Twin Cities.
Bouldin, M. G., Dongre, R. N., Rowe, G. M., Sharrock, M. J., and Anderson, D. A. (2000). “Predicting thermal cracking of pavements from binder properties: Theoretical basis and field validation.” Proc., Association of Asphalt Paving Technologies, Vol. 69, Association of Asphalt Paving Technologists (AAPT), Lino Lakes, MN, 455–496.
Hopkins, I. L., and Hamming, R. W. (1957). “On creep and relaxation.” J. Appl. Phys., 28(8), 906–909.
Johnson, A., Clyne, T. R., and Worel, J. B. (2009). “2008 MnROAD Phase II construction report.” Final Rep., Minnesota Dept. of Transportation, St. Paul, MN.
Marasteanu, M. O. (2007). “Emerging methods in asphalt binder rheological characterization.” Models and methods for bituminous materials, 257–284.
Marasteanu, O. M., and Anderson, D. A. (1999). “Improved model for bitumen rheological characterization.” Eurobitume Workshop on Performance-Related Properties for Bituminous Binders, Luxembourg.
Marasteanu, M. O., Velasquez, R., Zofka, A., and Cannone Falchetto, A. (2009). “Development of a simple test to determine the low temperature creep compliance of asphalt mixtures.”, Transportation Research Board (TRB), Washington, DC.
Moon, K. H. (2010). “Comparison of thermal stresses calculated from asphalt binder and asphalt mixture creep compliance data.” M.S. thesis, Civil Engineering, Univ. of Minnesota, Twin Cities.
Shenoy, A. (2002). “Single-event cracking temperature of asphalt pavements directly from the bending beam rheometer data.” J. Transp. Eng., 128(5), 465–471.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Feb 3, 2012
Accepted: Aug 9, 2012
Published online: Aug 28, 2012
Discussion open until: Jan 28, 2013
Published in print: Aug 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.