Internal Influence Factors of Asphalt-Aggregate Filler Interactions Based on Rheological Characteristics
Publication: Journal of Materials in Civil Engineering
Volume 24, Issue 12
Abstract
The interaction parameter K.Ziegel-B was used as an evaluation index to characterize asphalt-aggregate filler interactions. In this study of asphalt-aggregate filler interactions, the rheological properties of asphalt mastics using two kinds of asphalts and four kinds of aggregate powder under different filler concentrations were measured by a dynamic shear rheometer, the internal influence factors of asphalt-aggregate filler interactions were analyzed, and the significance of influence factors were sorted by using the variance analysis method. The research shows that filler concentration, asphalt components, silica content, and particle size of aggregate powder all have a certain regularity effect on asphalt-aggregate filler interactions. The variance analysis method reveals the contribution order of various influence factors on interactions, the contribution order from high to low are colloid and asphaltene, particle size of aggregate, silica content and filler concentration.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was sponsored by the National Natural and Science Foundation (No. 51108138), the National Natural and Science Foundation (No. 51008099) and the Program for New Century Excellent Talents in University by Ministry of Education (NCET - 06- 0340).
References
Anderson, D. A., and Goetz, W. H. (1973). “Mechanical behavior and reinforcement of mineral filler asphalt mixtures.” Assoc. Asphalt Paving Technol. Proc., 37–66.
Bhasin, A. (2006). “Development of methods to quantify bitumen-aggregate adhesion and loss of adhesion due to water.” Ph.D. dissertation, Texas A&M Univ., College Station, TX.
Chen, H., Sun, W., and Zhao, Q. (2003). “Overestimation of thickness of interface transition zone of aggregate in concrete by sectional analysis method.” J. Chin. Ceram. Soc., 31(11), 1130–1134.
Code of China. (2000). “Standard test methods of bitumen and bituminous mixtures for highway engineering.” JTJ052-2000, Beijing.
Code of China. (2005a). “Technical specifications for construction of highway asphalt pavements.” JTG F40-2004, Beijing.
Code of China. (2005b). “Test methods of aggregate for highway engineering.” JTG E42-2005, Beijing.
Code of China. (2005c). “Test methods of aggregate for highway engineering.” JTG E41-2005, Beijing.
Craus, J., Ishai, I., and Sides, A. (1978). “Some physico-chemical aspects of the Effect and the Role of the filler in bituminous paving mixtures.” Proc., Association of Asphalt Paving Technologists, 47, 558–588.
Ensley, E. K., and Seholz, H. A. (1972). “Study of asphalt-aggregate interactions by heat of immersion.” J. Inst. Petrol, 58(560), 95–101.
Huang, S. C., and Robertson, R. E. (2006). “Rheology of thin asphalt films in contact with aggregate.” Int. J. Road Mater. Pavement Des., 7(2), 179–199.
Kanitpong, K. (2005). “Evaluation of the roles of adhesion and cohesion properties of asphalt binders in moisture damage of HMA.” Ph.D. dissertation, Univ. of Wisconsin, Madison, WI.
Lin, J. M., and Sansalone, M. (1996). “Impact-echo studies of interfacial bond quality in concrete: Part I-Effects of unbounded fraction of area.” ACI Mater. J., 93(3), 223–232.
Qin, Z. (2006). “Performance and structure research of glass fiber/wood flour/Polypropylene three phase composites.” Master dissertation, Suzhou Univ., Suzhou, China, 16–17.
Salter, R. J., and Eimansy, N. M. (1998). “Some effects of aggregate characteristics on asphalt mixtures.” Highways, 56(3), 53–54.
Shao, X., Tan, Y., and Sun, L. (2005). “Analysis on the relationship between several indexes of mineral filler and asphalt mortar.” J. Hwy. Transp. Res. Dev., 22(2), 10–13.
Shinhe, H., Turner, T. F., and Pauli, A. T. (2005). “Evaluation of different techniques for adhesive properties of asphalt-aggregate filler systems at interfacial region.” Symp. on Advances in Adhesives, Adhesion Science and Testing, ASTM, Washington, D.C., 114–128.
SPSS 10.0 [Computer software]. IBM, New York.
Tasong, W. A., Lynsdale, C. J., and Cripps, J. C. (1999). “Aggregate-cement paste interface (Part I): Influence of aggregate geochemistry.” Cement Concr. Res., 29(7) 1019–1025.
Trende, U., and Buyukoturk, O. (1998). “Size effect and influence of aggregate roughness on interface fracture of concrete composites.” ACI Mater. J., 95(4), 331–338.
Wang, H. (2003). “Experimental and theoretical study on the interface bonding strength of the glass-fiber/polymer matrix composites.” Master dissertation, Wuhan Univ. of Technology, Wuhan, China, 12–13.
Wu, J. (2009). “Studies on interaction capability of asphalt and aggregate based on rheological characteristics.” Master dissertation, Harbin Institute of Technology, Harbin, China, 18–29.
Xiao, Q., Qian, C., and Xie, J. (2004). “Experimental research on modification of asphalt concrete performance and asphalt-aggregate filler interface by coupling agent.” J. Southeast Univ. (Nat. Sci. Ed.), 34(4), 485–489.
Yan, J. (2004). Road construction materials, China Communications Press, Beijing.
Zhou, W. (2002). “Study on adhesion of interface between asphalt and aggregate.” Master dissertation, Chang’an Univ., Xi’an, China.
Ziegel, K. D., and Romanov, A. (1973). “Modulus reinforcement in elastomer composites. II. Polymeric fillers.” J. Appl. Polymer Sci., 17(4), 1133–1142.
Zou, G., Zhang, X., and Yuan, Y. (2004). “Research on the filler influence on the high-temperature ability of asphalt mastic based on rheological method.” Highway, 3, 94–97.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Dec 23, 2010
Accepted: Feb 22, 2012
Published online: Feb 23, 2012
Published in print: Dec 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.