Compressive and Indirect Tensile Strengths of Cement-Treated Mix Granulates with Recycled Masonry and Concrete Aggregates
Publication: Journal of Materials in Civil Engineering
Volume 24, Issue 5
Abstract
Reuse of construction and demolition waste (CDW) as a road base material is one of the effective methods to reduce environmental effects caused by CDW dumping in landfills. To explore the feasibility to reuse CDW as a cement-treated material, this paper investigated the compressive and indirect tensile strengths of cement-treated demolition waste. Because the recycled CDW is a mix of recycled masonry and concrete, different ratios of recycled crushed masonry-concrete aggregates by mass were chosen in this study. Four mixture variables (cement content, degree of compaction, masonry content, and curing time) and their influence on the mechanical properties of cement-treated mix granulates () were then considered. Experimental results showed that a general model to estimate the compressive and indirect tensile strengths of can be established in relation to those four mixture variables. Compared with normal cement-treated granular materials, the masonry content is another unique factor to determine the mechanical properties of and its failure pattern. Furthermore, this study showed that may be designed to have a good mechanical strength as a cemented road base.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is partly supported by the Chinese Scholarship Council. The authors would like to thank Mr. M. R. Poot, Mr. J. W. Bientjes and Mr. D. C. Doedens (laboratory staff in Road and Railway Engineering, Delft University of Technology) for their assistance during this research.
References
Babic, B. (1987). “Relationship between mechanical properties of cement stabilized materials.” Mater. Struct.MASTED, 20(6), 455–460.
Bischoff, PH., and Perry, S. H. (1991). “Compressive behaviour of concrete at high strain rates.” Mater. Struct.MASTED, 24(6), 425–450.
Diamond, W. J. (2001). Practical experiment design for engineers and scientists, Wiley, New York.
Erkens, S.M. J. G. (2002). Asphalt concrete response (ACRe), Delft Univ. of Technology, Delft, the Netherlands.
Europe Committee for Standardization (CEN). (2000). “Tests for mechanical and physical properties of aggregates-Part 6: Determination of particle density and water absorption.” EN1097-6, Brussels, Belgium.
Europe Committee for Standardization (CEN). (2004). “Unbound and hydraulically bound mixtures-Part 2: Test methods for the determination of the laboratory reference density and water content-Proctor compaction.” EN13286-2, Brussels, Belgium.
Europe Committee for Standardization (CEN). (2005). “Design of concrete structures-part 1-1: General rules and rules for buildings.” EN199-1-1, Brussels, Belgium.
Europe Committee for Standardization (CEN). (2011). “Hydraulically bound mixtures-Specification-Part 1: Cement bound granular mixtures.” EN14227-1, Brussels, Belgium.
Ferguson, J. (1995). Managing and minimizing construction waste: A practical guide, Thomas Telford, London.
Hansen, T. C. (1992). “Recycling of demolished concrete and masonry: Report of technical committee 37-DRC demolition and reuse of concrete.” Spon, London.
Hendriks, Ch. F., and Janssen, G. M. T. (2001). “Reuse of construction and demolition waste in the Netherlands for road constructions.” Heron, 46(2), 109–117.
Kolias, S., and Williams, R. I. T. (1984). “Estimation of the modulus of elasticity of cement stabilized materials.” Geotech. Test. J.GTJODJ, 7(1), 26–34.
Larrard, F. D. (1999). “Concrete mixture proportioning: A scientific approach.” Spon, London.
Lim, S., and Zollinger, D. G. (2003). “Estimation of the compressive strength and modulus of elasticity of cement-treated aggregate base materials.” Transportation Research Record 1837, Transportation Research Board, Washington, DC, 30–38.
Ministry of Transport (MT). (2000). “Technical specifications for construction of highway roadbases.” JTJ034, Beijing.
Molenaar, A. A. A. (1994). Road materials part III: Asphaltic materials, Delft Univ. of Technology, Delft, Netherlands.
Molenaar, A. A. A. (1998). Road materials part II: Soil stabilization, Delft Univ. of Technology, Delft, Netherlands.
Molenaar, A. A. A. (2005). Cohesive and non-cohesive soils and unbound granular materials for bases and sub-bases in roads, Delft Univ. of Technology, Delft, Netherlands.
Muraya, P. M. (2007). “Permanent deformation of asphalt mixes.” Ph.D. thesis, Delft Univ. of Technology, Delft, Netherlands.
Niekerk, A. A. V. (2002). “Mechanical behavior and performance of granular bases and sub-bases in pavements.” Ph.D. thesis, Delft Univ. of Technology, Delft, Netherlands.
National Institute for Transport and Road Research (NITRR). (1986). “Cementitious stabilizers in road construction.” Committee of State Road Authorities, NITRR, Pretoria, South Africa.
Poon, C. S., and Chan, D. X. (2006). “Feasible use of recycled concrete aggregates and crushed clay brick as unbound road sub-base.” Constr. Build. Mater.CBUMEZ, 20(8), 578–585.
Prochaska, A. B., and Drnevich, V. P. (2005). “One-point vibrating hammer compaction test for granular soils.” Advances in Pavement Engineering (GSP 130), ASCE, Reston, VA.
Robinson, G. K. (2000). Practical strategies for experimenting, Wiley, Chichester, U.K.
Sherwood, P. T. (1995). Soil stabilization with cement and lime—State of the ART review, Her Majesty’s Stationery Office (HMSO), London.
Terrel, R. L., Epps, J. A., Barenberg, E. J., Mitchell, J. K., and Thompson, M. R. (1979a). Soil stabilization in pavement structures, a user’s manual—Volume 1: Pavement design and construction considerations, Federal Highway Administration, Dept. of Transportation, Washington, DC.
Terrel, R. L., Epps, J. A., Barenberg, E. J., Mitchell, J. K., and Thompson, M. R. (1979b). Soil stabilization in pavement structures, a user’s manual—Volume 2: Mixture design considerations, Federal Highway Administration, Dept. of Transportation, Washington, DC.
Williams, R. I. T. (1986). Cement-treated pavements: Materials, design, and construction, Elsevier Applied Science, London.
Xuan, D. X., Houben, L. J. M., Molenaar, A. A. A., and Shui, Z. H. (2011). “Estimation of mechanical characteristics of cement treated demolition waste.” T&DI Congress 2011: Integrated Transportation and Development for a Better Tomorrow, ASCE, Reston, VA.
Xuan, D. X., Houben, L. J. M., Molenaar, A. A. A., and Shui, Z. H. (2012). “Mechanical properties of cement-treated aggregate material—A review.” Mater. Des., 33(1), 496–502MADSD2.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Feb 3, 2011
Accepted: Oct 6, 2011
Published online: Oct 8, 2011
Published in print: May 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.