Prediction of Absorbed, Inert, and Effective Bituminous Quantities in Reclaimed Asphalt Pavement
Publication: Journal of Materials in Civil Engineering
Volume 24, Issue 1
Abstract
This paper presents methods to predict quantities of absorbed, inert, and effective bituminous material in reclaimed asphalt pavement (RAP) for particular sets of conditions; three RAP sources were investigated. The approach couples a data set of properties for 568 asphalt mix designs spanning five years of practice and testing of 100% RAP with added virgin binder; 394 compacted specimens and 68 loose specimens of 100% RAP were tested. A method to predict RAP absorbed asphalt was developed requiring two inputs: (1) total asphalt content; and (2) RAP effective specific gravity when coated with virgin binder. The method, was shown to yield more reasonable results than conventional methods, which were shown to very likely give incorrect absorbed asphalt estimates in some conditions. The relative effectiveness of RAP surface asphalt was evaluated, and estimates of inert and effective RAP asphalt were made for a variety of temperature, compactive effort, and warm mix additive conditions. Results showed different behaviors between RAP sources and between hot and warm mix temperatures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Thanks are due to the MDOT Research Division under the direction of James Watkins for funding State Study 212.
References
Doyle, J. D., and Howard, I. L. (2010a). “Compactability and bitumen utilization of 100% warm Mixed RAP.” Proc., Transportation Research Board 89th Annual Meeting, (DVD-ROM), Transportation Research Board, Washington, DC.
Doyle, J. D., and Howard, I. L. (2010b). “Laboratory investigation of high RAP content pavement surface layers.” Rep. No. FHWA/MS-DOT-RD-10-212, Mississippi Dept. of Transportation, Jackson, MS.
Hall, K. D., and Williams, S. G. (1999). “Effects of the ignition method on aggregate properties.” J. Assoc. Asphalt Paving Technol., 68, 574–588.
Kandhal, P. S., and Khatri, M. A. (1992). “Relating asphalt absorption to properties of asphalt cement and aggregates.” Transportation Research Record 1342, Transportation Research Board, Washington, DC, 76–84.
Kvasnak, A., West, R., Michael, J., Loria, L., Hajj, E. Y., and Tran, N. (2010). “Evaluation of the effect of reclaimed asphalt pavement aggregate bulk specific gravity on voids in mineral aggregate.” Proc., Transportation Research Board 89th Annual Meeting, (DVD-ROM), Transportation Research Board, Washington, DC.
McDaniel, R., and Anderson, R. M. (2001). “Recommended use of reclaimed asphalt pavement in the superpave mix design method: Technician’s manual.” National Cooperative Highway Research Program Rep. No. 452, Transportation Research Board, National Research Council, Washington, DC.
Newcomb, D. E., Brown, E. R., and Epps, J. A. (2007). “Designing HMA mixtures with high RAP content: A practical guide.” Quality Improvement Series 124, National Asphalt Pavement Association, Lanham, MD.
Prowell, B. D., and Carter, C. B. (2000). “Evaluation of the effect on extracted aggregate properties of samples extracted using the ignition furnace.” Rep. No. VTRC 00-IR1, Virginia Transportation Research Council, Charlottesville, VA.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Jan 26, 2011
Accepted: Jun 27, 2011
Published online: Jun 29, 2011
Published in print: Jan 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.