Effect of Calcium on Geopolymerization of Aluminosilicate Wastes
Publication: Journal of Materials in Civil Engineering
Volume 24, Issue 1
Abstract
The effect of calcium hydroxide on the mechanical and microstructural characteristics of geopolymer produced from alkaline activation of aluminosilicate wastes produced from demolition works were investigated. Demolition wastes are coarse aggregates, including waste concrete and demolished walls with cementing binder, both passing a sieve of 90 µm. A trial was carried out by making a mix containing demolished walls/waste concrete in the ratio of % by weight and other mixes having a hydrated lime content of 0–25% of the dry weight as a partial replacement for demolished walls. Half of the waste concrete was substituted with metakaolin, produced by firing kaolin at 800°C for 3 h. The alkaline activators used were sodium hydroxide and sodium silicate in the ratio of by weight of the dry weight. Curing of the geopolymer mixes was performed at ambient temperature (23°C) in tap water and under a mild temperature of 40°C [100% relative humidity (RH)]. Drying treatment at 80°C for 24 h was carried out on each specimen mix before subjecting it to compressive strength so as to improve the mechanical properties, and the resulting properties of dried and saturated samples were compared. Addition of the calcium compound improved the mechanical and microstructural properties of the specimens with the increase of hydrated lime up to 10 % by weight for mix specimens that were water-cured under ambient temperature, whereas the properties slightly decreased for those specimens cured in 100% RH at 40°C.
Get full access to this article
View all available purchase options and get full access to this article.
References
Allahverdi, A., Škvára, F. (2001). “Nitric acid attack on hardened paste of geopolymeric cements: Part 1.” Ceram.-Silik, 45(3), 81–88.
Alonso, S., and Palomo, A. (2001). “Alkaline activation of metakaolin and calcium hydroxide mixtures: Influence of temperature, activator concentration and solids ratio.” Mater. Letters, 47(1–2), 55–62.
Ambroise, J., Murat, M., and Pera, J. (1985). “Hydration reaction and hardening of calcined clays and related minerals: V. Extension of the research and general conclusions.” Cem. Concr. Res., 15(2), 261–268.
ASTM. (2007). “Standard test method for compressive strength of hydraulic cement mortars.” C109M-07, West Conshohocken, PA.
Buchwald, A., Kaps, C., and Hohmann, M. (2003). “Alkali-activated binders and pozzolan cement binders-complete binder reaction or two sides of the same story?.” Proc., 11th Int. Conf. on Chemistry of Cement, Portland Cement Association, Skokie, IL, 1238–1246.
Buchwald, A., Hilbig, H., and Kaps, C. (2007). “Alkali-activated metakaolin-slag blends performance and structure in dependence on their composition.” J. Mater. Sci., 42(9), 3024–3032.
Cioffi, R., Maffucci, L., and Santoro, L. (2003). “Optimization of geopolymer synthesis by calcinations and polycondensation of a kaolinitic residue.” Resour., Conserv. Recycl., 40(1), 27–38.
Collepardi, M. (2006). The new concrete, Grafiche Tintoretto, Treviso, Italy, 221–224.
Criado, M., Palomo, A., Fernandez-Jimenez, A. (2005). “Alkali activation of fly ash. Part 1. Effect of curing conditions on the carbonation of the reaction products.” Fuel, 84(16), 2048–2054.
Davidovits, J. (1991). “Geopolymers—Inorganic polymeric new materials.” J. Therm. Anal., 37(8), 1633–1656.
De Silva, P., Sagoe-Crenstil, K., and Sirivivatnanon, V. (2007). “Kinetics of geopolymerization: Role of and .” Cem Concr Res., 37(4), 512–518.
Dombrowski, K., Buchwald, A., and Weil, M. (2007). “The influence of calcium content on the structure and thermal performance of fly ash-based geopolymers.” J. Mater. Sci., 42(9), 3033–3043.
Granizo, M. L., Alonso, S., Blanco-Varela, M. T., and Palomo, A. (2002). “Alkaline activation of metakaolin: Effect of calcium hydroxide in the products of reaction.” J. Am. Ceram. Soc., 85(1), 225–231.
Guo, X., Shi, H., Chen, L., and Dick, W. A. (2010). “Alkali-activated complex binders from class C fly ash and Ca-containing admixtures.” J. Hazard. Mater., 173(1–3), 480–486.
Hewlett, P. C. (1998). “Lea’s chemistry of cement and concrete.” 4th Ed., Edward Arnold, London.
Kakali, G., Perraki, T., Tsivilis, S., and Badogiannis, E. (2001). “Thermal treatment of kaolin: The effect of mineralogy on the pozzolanic activity.” Appl. Clay Sci., 20(1–2), 73–80.
Krivenko, P. V. (1994). “Alkaline cements.” Proc., 1st Int. Conf. on Alkaline Cements and Concretes, Kiev, Ukraine, 11–129.
Lee, S. K., and Stebbins, J. F. (1999). “The degree of aluminum avoidance in aluminosilicate glasses.” Am. Mineral., 84(5–6), 937–945.
Lee, W. K. W., Van Deventer, J. S. J. (2002). “The effects of inorganic salt contamination on the strength and durability of geopolymers.” Colloids Surf., A, 212(2–3), 27–44.
MacKenzie, K. J. D., Smith, M. E., and Wong, A. (2007). “A multinuclear MAS NMR study of calcium-containing aluminosilicate inorganic polymers.” J. Mater. Chem., 17(48), 5090–5096.
Neville, A. M. (1990). Properties of concrete, Longman Scientific & Technical, Essex, UK.
Nicholson, C. L., et al. (2005). “Building innovation through geopolymer technology.” Chem. N. Z., 69(3), 10–12.
Palomo, A., and Lopez de la Fuente, J. I. (2003). “Alkali-activated cementitious materials: Alternative matrices for the immobilization of hazardous wastes—Part I. Stabilization of boron.” Cement Concrete Res., 33(2), 281–288.
Palomo, A., and Palacios, M. (2003). “Alkali-activated cementitious materials: Alternative matrices for the immobilization of hazardous wastes—Part II. Stabilization of chromium and lead.” Cement Concrete Res., 33(2), 289–295.
Panias, D., Giannopoulou, I. P., and Perraki, T. (2007). “Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers.” Colloids Surf., A, 301(1–3), 246–254.
Provis, J. L., Lukey, G. C., and van Deventer, J. S. J. (2005). “Do geopolymers actually contain nanocrystalline zeolites? A reexamination of existing results.” Chem. Mater., 17(12), 3075–3085.
Puertas, F., Palacios, M., and Vàzquea, T. (2006). “Carbonation process of alkali-activated slag mortars.” J. Material Science, 41(10), 3071–3082.
Swanepoel, J. C., and Strydom, C. A. (2002). “Utilization of fly ash in a geopolymeric material.” Appl. Geochem., 17(8), 1143–1148.
Temuujin, J., Van Riessen, A., and Williams, R. (2009). “Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes.” J. Hazard. Mater., 167(1–3), 82–88.
Van Jaarsveld, J. G. S., Van Deventer, J. S. J., and Schwartzman, A. (1999). “The potential use of geopolymeric materials to immobilise toxic metals: Part II. Material and leaching characteristics.” Miner. Eng., 12(1), 75–91.
Wenying, G., Guolin, W., Jianda, W., Ziyun, W., and Suhong, Y. (2008). “Preparation and performance of geopolymers.” J. Wuhan Univ. of Technol.–Mater. Sci. Edition, 23(3), 326–330.
Yip, C. K., and Van Deventer, J. S. J. (2003). “Microanalysis of calcium silicate hydrate gel formed within a geopolymeric binder.’ J. Mater. Sci., 38(18), 3851–3860.
Yip, C. K., Lukey, G. C., and Van Deventer, J. S. J. (2005). “The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation.” Cem. Concr. Res., 35(9), 1688–1697.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Dec 29, 2010
Accepted: Jun 17, 2011
Published online: Jun 21, 2011
Published in print: Jan 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.