Thixotropic Characteristics of Asphalt Binder
Publication: Journal of Materials in Civil Engineering
Volume 23, Issue 12
Abstract
Asphalt binder has thixotropic characteristics that significantly affect its overall performance, but specifically fatigue performance, healing performance, and high temperature performance. Therefore, a clear understanding of the thixotropy of asphalt binder, together with proper modeling, is useful in researching the performance of the material. However, research in this area is still in the early stages of investigation. For the study reported in this paper, the thixotropy of four types of asphalt binder is examined by using various methods to establish corresponding thixotropy models. The results show that the exponential thixotropy model, the extended exponential function, and the structural kinetic model can be established by using different methods, and they all reflect the thixotropy of asphalt binder to some extent.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was sponsored by the National Natural Science Foundation of China (NNSFC51108138 and NNSFC50778057).
References
Baravian, C., and Quemada, D. (1998). “Correction of instrumental inertia effects in controlled stress rheometry.” Eur. Phys. J. Appl. Phys., 2(2), 189–195.
Barnes, H. A. (1997). “Thixotropy: A review.” J. Non-Newtonian Fluid Mech., 70(1–2), 1–33.
De la Roche, C. (1996). “Module de rigidité et comportement en fatigue des enrobés bitumineux.” Expérimentations et Nouvelles Perspectives D’analyse, 189 (in French).
Delaporte, B., Van Rompu, J., Di Benedetto, H., Chaverot, P., and Gauthier, G. (2008). “New procedure to evaluate fatigue of bituminous mastics using an annular shear rheometer prototype.” Proc., 6th RILEM Int. Conf. on Cracking in Pavement—Pavement cracking: Mechanisms, modeling, detection, testing and case histories, CRC Press-Taylor & Francis, Boca Raton, FL, 457–467.
Dullaert, K., and Mewis, J. (2005). “Thixotropy: Build-up and breakdown curves during flow.” J. Rheol., 49(6), 1213–1230.
Dullaert, K., and Mewis, J. (2006). “A structural kinetics model for thixotropy.” J. Non-Newtonian Fluid Mech., 139(1–2), 21–30.
Di Benedetto, H., De la Roche, C., Baaj, H., Pronk, A., and Lundström, R. (2004). “Fatigue of bituminous mixtures.” Mater. Struct., 37(3), 202–267.
Green, H., and Weltmann, R. N. (1943). “Analysis of the thixotropy of pigmen-vehicle suspension-basic principles of the hysteresis loop.” Ind. Eng. Chem., Anal. Ed., 15(3), 201–206.
Kim, Y. R. (2009). “DBN law for the thermo-visco-elasto-plastic behavior of asphalt concrete.” Modeling of asphalt concrete, ASCE, Reston, VA, 261–262.
Krieger, I. M. (1990). “Bingham Award lecture 1989: The role of instrument inertia in controlled-stress rheometers.” J. Rheol., 34(4), 471–483.
Mercer, H. A., and Weymann, H. D. (1974). “Structure of thixotropic suspensions in shear-flow 3 time-dependent behavior.” J. Rheol., 18(2), 199–218.
Mewis, J., and Wagner, N. J. (2009). “Thixotropy.” Adv. Colloid Interface Sci., 147–148, 214–227.
Peterfi, T. (1927). “The separation of the fertilization membrane of sea urchin eggs.” Arch. Entwicklungsmech. Organ., 112, 660–695.
Raghavan, S. R., and Khan, S. A. (1995). “Shear-induced microstructural changes in flocculated suspensions of fumed silica.” J. Rheol., 39(6), 1311–1325.
Schalek, E., and Szegvari, A. (1923). “The slow coagulation of concentrated iron oxide sol to a reversible gel.” Kolloid Z., 33(6), 326–334.
Shan, L. Y. (2010). “Fatigue and rheology mechanism of asphalt binder based on viscoelastic characteristic.” Doctoral dissertation, Harbin Institute of Technology, Harbin, Heilongjiang, China.
Shan, L. Y., Tan, Y. Q., Underwood, B. S., and Kim, Y. R. (2010). “Application of thixotropy to analyzed fatigue and healing performance of asphalt binder.” Transp. Res. Rec., 2179, 85–92.
Soltani, A., and Anderson, D. A. (2005). “New test protocol to measure fatigue damage in asphalt mixtures.” Road Mater. Pavement Des., 6(4), 485–514.
Song, A. L., Liang, G. C., and Zhang, W. Y. (2007). “The thixotropy of the waxy crude: A novel three-parameter model.” Oil Gas Storage Transp., 26(7), 40–45.
Yziquel, F., Carreau, P. J., Moan, M., and Tanguy, P. A. (1999). “Rheological modeling of concentrated colloidal suspension.” J. Non-Newtonian Fluid Mech., 86(1), 133–155.
Zhang, L. J. (2008). “Comparison of several thixotropy models for waxy crude oil.” J. Jianghan Petroleum University of Staff and Workers, 21(6), 56–58.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Sep 22, 2010
Accepted: Apr 26, 2011
Published online: Apr 29, 2011
Published in print: Dec 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.