Maxwell Model Analysis of Bitumen Rheological Data
Publication: Journal of Materials in Civil Engineering
Volume 23, Issue 10
Abstract
Maxwell models have been parameterized on the basis of rheological data from the literature for bitumens used in pavements to relate differences in rheology to underlying differences in mechanical relaxation times. The data employed were previously measured for bitumens without aging, with rolling thin-film oven (RTFO) aging, and with subsequent pressure aging vessel (PAV) aging. Bitumens in different data sets included different types of bitumen modification. Full time-temperature superposition was applied, with horizontal shift factors based on achieving superposition of phase angle tangent () and vertical shift factors determined based on overlap of storage and loss moduli. The results determined for the horizontal shift factor followed the Williams-Landel-Ferry equation with parameters that differed for each bitumen. Dynamic modulus data were represented by using a series of discrete Maxwell models. Fand suggested a continuous yet asymmetric distribution of relaxation times on a logarithmic time axis. PAV-aged bitumens showed increased modulus contributions at longer relaxation times than RTFO-aged bitumens.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Professor Mihai O. Marasteanu is thanked for providing access to his raw data. Financial support is gratefully acknowledged from the Rhode Island Department of Transportation (Research and Technology Division), the URI Transportation Center, and the Transportation Center, and the Asphalt Research Consortium of the Federal Highway Administration (contract FHADTFH61-07-H- 00009) through a subcontract from the Western Research Institute.
References
Abramowitz, M., and Stegun, I. A. (1964). Handbook of mathematical functions, Dover, Mineola, NY.
Bailey, R. T., North, A. M., and Pethrick, R. A. (1981). Molecular motion in high polymers, Clarendon, Oxford, UK.
Christensen, D. W., Jr., and Anderson, D. A. (1992). “Interpretation of dynamic mechanical test data for paving grade asphalt cements.” J. Assoc. Asphalt Paving Technol., 61, 67–116.
Clyne, T. R., and Marasteanu, M. O. (2004). “Inventory of properties of Minnesota certified asphalt binders.” (Technical Report MN/RC-2004-35), Minnesota Department of Transportation, St Paul, MN.
da Silva, L. S., Forte, M. M. C., Vignol, L. A., and Cardozo, N. S. M. (2004). “Study of rheological properties of pure and polymer-modified Brazilian asphalt binders.” J. Mater. Sci., 39, 539–546.
Dickinson, E. J., and Witt, H. P. (1974). “The dynamic shear modulus of paving asphalts as a function frequency.” Trans. Soc. Rheol., 18, 591–606.
Ferry, J. D. (1980). Viscoelastic properties of polymers, Wiley, New York.
Greenfield, M. L. (2009). “Bitumen at the molecular level: Molecular simulations and chemo-mechanics.” Chemomechanics of bituminous materials (Proc. Int. Workshop on the Chemomechanics of Bituminous Materials), N. Kringos, ed., Group of Mechanics of Infrastructure Materials, Delft, Netherlands, 9–15.
Jongepier, R., and Kuilman, B. (1968). “Characteristics of the rheology of bitumens.” J. Assoc. Asphalt Paving Technol., 38, 98–122.
Jongepier, R., and Kuilman, B. (1970). “The dynamic shear modulus of bitumens as a function of frequency and temperature.” Rheol. Acta, 9, 102–111.
Kennedy, T. W., et al. (1994). “Superior performing asphalt pavements (Superpave): The product of the SHRP asphalt research program.” Technical Rep. SHRP-A-410, Transportation Research Board, Washington, DC.
Marasteanu, M., and Anderson, D. (1996). “Time-temperature dependency of asphalt binders—An improved model.” J. Assoc. Asphalt Paving Technol., 65, 408–449.
Marasteanu, M. O., and Anderson, D. A. (1999). “Improved model for bitumen rheological characterization.” Proc. Eurobitume workshop 99 Luxembourg, European Asphalt Association, Netherlands.
Marasteanu, M. O., Clyne, T., McGraw, J., Li, X., and Velasquez, R. (2005). “High-temperature rheological properties of asphalt binders.” Transp. Res. Rec., 1901, 52–59.
Matlab 7.4.0.287 [Computer software]. Natick, MA, MathWorks.
Olawepo, A. M. (2010). "Fundamental mechanical modeling of asphalt rheological behavior and its relationship to chemical composition." Masters thesis, Univ. of Rhode Island, Kingston, RI.
Rouse, P. E., Jr. (1953). “A theory of the linear viscoelastic properties of dilute solutions of coiling polymers.” J. Chem. Phys., 21, 1272–1280.
Williams, M. L., Landel, R. F., and Ferry, J. D. (1955). “The temperature dependence of relaxation mechanisms in polymers and other glass-forming liquids.” J. Am. Chem. Soc., 77, 3701–3707.
Zhang, L., and Greenfield, M. L. (2007). “Relaxation time, diffusion, and viscosity analysis of model asphalt systems using molecular simulation.” J. Chem. Phys., 127, 194502.
Zhang, L., and Greenfield, M. L. (2010). “Rotational relaxation times of individual compounds from simulations of molecular asphalt models.” J. Chem. Phys., 132, 184502.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Mar 2, 2010
Accepted: Apr 5, 2011
Published online: Apr 7, 2011
Published in print: Oct 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.