Limit States and Service Life of Cement Renders on Façades
Publication: Journal of Materials in Civil Engineering
Volume 23, Issue 10
Abstract
The research presented in this paper is related to the durability of cement renders on façades, based on fieldwork data relative to the condition and extent of degradation of 100 façades of residential buildings in Portugal. Deterioration paths are obtained for staining, cracking, and detachment that show the loss of performance of the façade over time until a critical minimum acceptance level is reached, which is considered an estimated durability limit. These degradation patterns are analyzed individually to confirm whether any of three types of defects can effectively be considered limit states for the durability of cement renders on façades. The combined effect of all the defects that occur is also modeled as a single degradation path, and the expected service life is quantified. The results confirm that detachment constitutes a limit state of cement-rendered façades because it directly affects the physical durability of renders. Staining and cracking alone do not generally tend to signal the end of the physical durability threshold of renders, regardless of their impact on the performance and visual quality of the façade. However, when all degradation mechanisms are considered simultaneously, the estimated durability intervals correspond to a 50% additional decrease of the physical durability limit of renders. These results are in line with the general perception of damage to the façade, on which the decision to repair is based. The conclusions suggest that actual service life should be used (as reference service life), as opposed to durability data obtained through limit state conditions.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aikivuori, A. M. (1999). “Critical loss of performance—What fails before durability.” Proc., 8th Int. Conf. on Durability of Building Materials & Components, M. A. Lacasse and D. J. Vanier, eds., CIB W80 and Institute for Research in Construction, Ottawa, Ontario, Canada, 1369–1376.
Balaras, C. A., Dascalaki, E., Droutsa, K., and Kontoyiannidis, S. (2004). “European residential building audits database.” Group energy conservation (CD-ROM), IERSD, National Observatory of Athens, Athens, Greece.
Balaras, C. A., Droutsa, K., Dascalaki, E., and Kontoyiannidis, S. (2005). “Deterioration of European apartment buildings.” Energy Build., 37(5), 515–527.
Bogenstätter, U. (2000). “Prediction and optimisation of life-cycle costs in early design.” Build. Res. Inf., 28(5-6), 376–386.
Bonshor, R., and Bonshor, L. (2001). Cracking in buildings, BRE Group, London.
Brand, S. (1997). How buildings learn—What happens after they’re built, Orion Books, London.
Burati, J., Farrington, J., and Ledbetter, W. (1992). “Causes of quality deviations in design and construction.” J. Constr. Eng. Manage., 118(1), 34–49.
Chew, M. Y. L., and Ping, T. P. (2003). Staining of facades, World Scientific Publishing, Singapore.
Chew, M. Y. L., and Tan, S. S. (2004). “A multivariate approach to maintenance prediction of wet areas.” Constr. Manage. Econ., 22(4), 395–407.
Chew, M. Y. L., Silva, N., and Tan, S. S. (2004). “A neural network approach to assessing building façade maintainability in the tropics.” Constr. Manage. Econ., 22(6), 581–594.
Chindaprasirt, P., Buapa, N., and Cao, H. T. (2005). “Mixed cement containing fly ash for masonry and plastering work.” Constr. Build. Mater., 19(8), 612–618.
European Parliament. (2002). “The energy performance of buildings.” Directive 2002/91/EC, Brussels.
Flores-Colen, I., de Brito, J., and Freitas, V. P. (2006). “Expedient in situ test techniques for predictive maintenance of rendered façades.” J. Build. Apprais., 2(2), 142–156.
Gaspar, P., and de Brito, J. (2008a). “Quantifying environmental effects on cement-rendered facades: a comparison between different degradation indicators.” Build. Environ., 43(11), 1818–1828.
Gaspar, P., and de Brito, J. (2008b). “Service life estimation of cement-rendered facades.” Build. Res. Inf., 36(1), 44–55.
Gaspar, P., and de Brito, J. (2008c). “Minimum required performance level for rendered facades.” Proc., 11th Int. Conf. on Durability of Building Materials & Components, A. N. Türkeri and Ö. Sengül, eds., CIB W80 and Istanbul Technical Univ., Istanbul, Turkey, 1177–1184.
Housing Association Property Mutual (HAPM). (1999). HAPM component life manual (CD-ROM), E & FN Spon, London.
Henriques, F. (1992). “The action of moisture in walls.” Ph.D. thesis, IST Technical Univ. of Lisbon, Lisbon, Portugal (in Portuguese).
Horst, S., O’Connor, J., and Argeles, C. (2005). “Survey on actual service lives of north American buildings.” Proc., 10th Int. Conf. on Durability of Building Materials & Components, J. L. Chevalier, ed., CIB W80 and Centre Scientifique et Technique du Bâtiment, Saint Martin D’Heres, France, 851–858.
Portuguese National Statistics Institute (INE). (2003). “Census 2001 quality survey.” 〈http://www.ine.pt/xportal/xmain?xpid=INE&xpgid=ine_publicacoes&PUBLICACOESpub_boui=379028&PUBLICACOESmodo=2&xlang=en〉 (May 20, 2010) (in Portuguese).
Iselin, D. G., and Lemer, A. C. (1993). The fourth dimension in building: Strategies for minimizing obsolescence, National Academy Press, Washington, DC.
ISO. (2000). “Building and constructed assets: Service life planning—Part 1: General principles.” ISO 15686-1, Geneva.
Kottek, M., Grieser, J., Beck, C., Rudolf, B., and Rubel, F. (2006). “World map of the Köppen-Geiger climate classification updated.” Meteorol. Z., 15(3), 259–263.
Kus, H., and Nygren, K. (2002). “Microenvironmental characterization of rendered autoclaved aerated concrete.” Build. Res. Inf., 30(1), 25–34.
Marshall, S. J., and Genge, G. R. (1999). “Condition survey of Toronto’s high-rise rental stock.” Proc., 8th Int. Conf. on Durability of Building Materials & Components, M. A. Lacasse and D. J. Vanier, eds., CIB W80 and Institute for Research in Construction, Ottawa, Ontario, Canada, 1746–1755.
Marteinsson, B., and Jónsson, B. (1999). “Overall survey of buildings—Performance and maintenance.” Proc., 8th Int. Conf. on Durability of Building Materials & Components, M. A. Lacasse and D. J. Vanier, eds., CIB W80 and Institute for Research in Construction, Ottawa, Ontario, Canada, 1634–1654.
Moubray, J. (1991). Reliability-centred maintenance, Butterworth-Heinemann, Oxford, UK.
Papayianni, I., and Stefanidou, M. (2006). “Strength-porosity relationships in lime-pozzolan mortars.” Constr. Build. Mater., 20(11), 700–705.
Parnham, P. (1997). Prevention of premature staining of new buildings, E & FN Spon, London.
Quist, W., Hees, R., Naldin, S., and Nijland, T. (2008). “The perception of small scale damage and repairs of natural stone.” Proc., 11th Int. Conf. on Durability of Building Materials & Components, A. N. Türkeri and Ö. Sengül, eds., CIB W80 and Istanbul Technical Univ., Istanbul, Turkey, 753–761.
Ramroth, W. G. (2007). Planning for disaster. How natural and manmade disaster shape the built environment, Kaplan, New York.
Ross, S. M. (1987). Introduction to probability and statistics for engineers and scientists, Wiley, Singapore.
Sarja, A. (2003). “Lifetime performance modelling of structures with limit state principles.” Proc., 2nd Int. Symp.—Integrated Lifetime Engineering of Buildings and Civil Infrastructures, Association of Finnish Civil Engineers (RIL), Helsinki, Finland, 1001–1007.
Sarja, A. (2005). “Generic limit state design of structures.” Proc., 10th Int. Conf. on Durability of Building Materials & Components, J. L. Chevalier, ed., CIB W80 and Centre Scientifique et Technique du Bâtiment, Saint Martin D’Heres, France, 420–467.
Schutter, G., and Poppe, A. M. (2004). “Quantification of the water demand of sand in mortar.” Constr. Build. Mater., 18(7), 517–521.
Shohet, I., and Paciuk, M. (2004). “Service life prediction of exterior cladding components under standard conditions.” Constr. Manage. Econ., 22(10), 1081–1090.
Shohet, I., and Paciuk, M. (2006). “Service life prediction of exterior cladding components under failure conditions.” Constr. Manage. Econ., 24(2), 131–148.
Watt, D. (1999). Building pathology: Principles and practice, Blackwell Science, Oxford, UK.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Jun 7, 2010
Accepted: Mar 21, 2011
Published online: Mar 23, 2011
Published in print: Oct 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.