Experimental Study on Flexural Testing of Compacted Soil Beams
Publication: Journal of Materials in Civil Engineering
Volume 22, Issue 5
Abstract
This paper presents an experimental study on flexural testing of three different types of soils molded at three different water contents and two different compaction energies. For this purpose, a custom designed simple beam test setup was developed in the laboratory for inducing the controlled pure bending to the soil under evaluation together with a charged coupled device video camera mounted on to a moving triaxial base plate. Based on the analysis and interpretation of bending moment (BM)-curvature relationships of tested soil beams, effects of soil type, molding water content, and compaction energy on the flexural behavior could be obtained. For the varied molding water contents and for the range of plasticity indices varied, with an increase in plasticity index of the soil and molding water content, a trend of increasing tensile strain at crack initiation was observed. In comparison, flexural tensile strength at crack initiation was observed to decrease with an increase in molding water content. Further, flexural rigidity at crack initiation was found to be higher for soils having low plasticity index and moist compacted at low-molding water contents. The developed test setup is capable of inducing distortion levels of 0.105 and can be useful in assessing flexural characteristics of different types of fine-grained soils.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers thank the staff at the geotechnical engineering laboratory of the Indian Institute of Technology Bombay for their active involvement during the course of the study. Thanks are also due to reviewers for their critical review and suggestions for improving the quality of this manuscript.
References
Ajaz, A., and Parry, R. H. G. (1975). “Stress-strain behaviour of two compacted clays in tension and compression.” Geotechnique, 25(3), 495–512.
ASTM. (2006). Flexural strength of soil-cement using simple beam with third-point loading, ASTM D1635, West Conshohocken, Pa.
ASTM. (2007a). “Standard test methods for laboratory compaction characteristics of soil using modified effort.” ASTM D1557, West Conshohocken, Pa.
ASTM. (2007b). “Standard test methods for laboratory compaction characteristics of soil using standard effort.” ASTM D698, West Conshohocken, Pa.
Benson, C. H., Daniel, D. E., and Boutwell, G. P. (1999). “Field performance of compacted clay liners.” J. Geotech. Geoenviron. Eng., 125(5), 390–403.
BIS. (1978). “Flexural strength of soil-cement using simple beam with third-point loading, Part 6.” 4332, New Delhi.
Daniel, D. E. (1983). “Shallow land burial of low-level radioactive waste.” J. Geotech. Engrg., 109(1), 40–55.
Das, B. M., Yen, S. -C., and Dass, R. N. (1995). “Brazilian tensile strength test of lightly cemented sand.” Can. Geotech. J., 32(1), 166–171.
Dass, R. N., Yen, S. -C., Puri, V. K., and Wright, M. A. (1994). “Tensile stress-strain characteristics of lightly cemented sand.” Geotech. Test. J., 17(3), 305–314.
Dismuke, T. D., Chen, W. F., and Fang, H. Y. (1972). “Tensile strength of rock by the double-punch method.” Rock Mech., 4(2), 79–87.
Ghosh, A., and Subbarao, C. (2006). “Tensile strength bearing ratio and slake durability of class F fly ash stabilized with lime and gypsum.” J. Mater. Civ. Eng., 18(1), 18–27.
Gourc, J. P., Camp, S., Viswanadham, B. V. S., and Rajesh, S. (2007). “Some studies on deformation behaviour of clay liners of landfills: Centrifuge and Full-scale tests—Influence of reinforcement inclusion.” Proc., New Horizons in Earth Reinforcement, J. Otani, Y. Miyata, and T. Mukunoki, eds., Taylor and Francis, London, 639–644.
Heerten, G., and Koerner, R. M. (2008). “Cover systems for landfills and brownfields.” Proc., 24th SKZ-Fachtagung Die Sichere Deponi, Würzburg, Germany, 1–25.
Henne, J. (1989). “Versuchsgerät zur Ermittlung der Biegezugfestigkeit von bindigen Böden.” Geotechnik, 2(12), 96–99 (in German).
Indraratna, B., and Lasek, G. (1996). “Laboratory evaluation of the load deflection behaviour of clay beams reinforced with galvanized wire netting.” Geotextiles Geomembranes, 14(10), 555–573.
Jessberger, H. L. (1994). “Geotechnical aspects of landfill design and construction—Part 3.” Geotech. Eng., 107(2), 115–122.
Jessberger, H. L., and Stone, K. J. L. (1991). “Subsidence effect on clay barriers.” Geotechnique, 41(2), 185–194.
Jha, B. K. (2006). “Centrifuge model studies on randomly reinforced soil liners subjected to differential settlements.” MS dissertation, Indian Institute of Technology Bombay, India.
Kim, T. H., Kim, C. K., Jung, S. J., and Lee, J. H. (2007). “Tensile strength characteristics of contaminated and compacted sand-bentonite mixtures.” Environ. Geol., 52(4), 653–661.
Krishnayya, A. V. G., Eisenstein, Z., and Morgenstern, N. R. (1974). “Behaviour of compacted soil in tension.” J. Geotech. Engrg., 100(GT9), 1051–1061.
Kumar, K. (2002). “Evaluation of deformation behaviour of kaolin-sand liners of landfills.” MS dissertation, Indian Institute of Technology Bombay, India.
LaGatta, M. D., Boardman, B. T., Bradford, H. C., and Daniel, D. E. (1997). “Geosynthetic clay liners subjected to differential settlement.” J. Geotech. Geoenviron. Eng., 123(5), 402–410.
Ling, H. L., Leschinsky, D., Mohri, Y., and Kawabata, T. (1998). “Evaluation of municipal solid waste landfill settlement.” J. Geotech. Geoenviron. Eng., 124(1), 21–28.
Lozano, N., and Augenbaugh, N. B. (1995). “Flexibility of fine grained soils.” Proc., Geoenvironment 2000, Vol. 2, Y. B. Acar and D. E. Daniel, eds., ASCE, Reston, Va., 844–858.
Maher, M. H., and Ho, Y. C. (1994). “Mechanical properties of kaolinite/fiber soil composite.” J. Geotech. Engrg., 120(8), 1381–1393.
Nahlawi, H., Chakrabarti, S., and Kodikara, J. (2004). “A direct tensile strength testing method for unsaturated geomaterials. ” Geotech. Test. J., 27(4), 1–6.
Pawar, N. S. (2007). “Effect of fiber reinforcement on the behaviour of compacted soil liners.” MS dissertation, Indian Institute of Technology Bombay, India.
Qian, X., Koerner, R. M., and Gray, D. H. (2002). Geotechnical aspects of landfill design and construction, 1st Ed., Prentice-Hall, Englewood Cliffs, N.J., 431–436.
Scherbeck, R., and Jessberger, H. L. (1993). “Assessment of deformed mineral sealing layers.” Proc., Waste Disposal by Landfill: Proc. of the Symp. Green ’93, R. W. Sarsby, ed., Balkema, Rotterdam, The Netherlands, 477–486.
Tang, G. X., and Graham, J. (2000). “A method for testing tensile strength in unsaturated soils.” Geotech. Test. J., 23(3), 377–382.
Thusyanthan, N. I., Take, W. A., Madabhushi, S. P. G., and Bolton, M. D. (2007). “Crack initiation in clay observed in beam bending.” Geotechnique, 57(7), 581–594.
Viswanadham, B. V. S., and Jessberger, H. L. (2005). “Centrifuge modeling of geosynthetic reinforced clay liners of landfills.” J. Geotech. Geoenviron. Eng., 131(5), 564–574.
Ziegler, S., Leshchinsky, D., Ling, H. I., and Perry, E. B. (1998). “Effect of short polymeric fibers on crack development in clays.” Soils Found., 38(1), 247–253.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Sep 14, 2008
Accepted: Aug 28, 2009
Published online: Sep 1, 2009
Published in print: May 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.