Abstract
Weirs are structures that allow uppermost layers of liquids to flow by gravity downstream. They are, therefore, inherently gravity skimmers, and have successfully been used as skimmers in numerous applications, including oil-spill cleanup and various stormwater and wastewater treatment operations. This study examines the hydraulic skimming properties of sharp-crested weirs. The skimming properties of basic rectangular, triangular, and trapezoidal weirs are first characterized with a nondimensional skimming function. The triangular V-notch weir is shown to be a superior skimmer when compared to the other basic weirs. The V-notch weir has a maximum skimming rate , occurring at an elevation . Considerable enhancements of skimming properties are, however, achieved with higher order polynomial weirs. Polynomial weirs of order have maximum skimming rates , occurring at desirable elevations . The results of this work can be applied to design high performing sharp-crested skimmer weir outlets.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
No data, models, or code were generated or used during the study.
References
Baddour, R. E. 2008. “Head-discharge equation for sharp-crested polynomial weir.” J. Irrig. Drain. Eng. 134 (2): 260–262. https://doi.org/10.1061/(ASCE)0733-9437(2008)134:2(260).
Baddour, R. E. 2019. “Redesigning compound weirs as polynomial weirs.” In World environmental and water resources congress 2019, 40–44. Reston, VA: ASCE.
Cox, A. L., E. G. Kullberg, K. A. MacKenzie, and C. I. Thornton. 2014. “Stage-discharge rating equation for an elliptical sharp-crested weir.” J. Irrig. Drain. Eng. 140 (6): 04014018. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000730.
Cox, A. L., S. Saadat, K. A. MacKenzie, and C. I. Thornton. 2015. “Effect of urban debris on hydraulic efficiency of an elliptical sharp-crested weir.” J. Irrig. Drain. Eng. 141 (6): 06014006. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000837.
Gholmareza-Kashi, S., and R. E. Baddour. 2018. “Reservoir level management using multi-stage polynomial weir systems.” In Proc., Int. Commission on Large Dams (ICOLD) Congress, 165–177. Vienna, Austria: Chapman and Hall/CRC.
Huber, C. 2006. BMP modeling concepts and simulation. Washington, DC: Office of Research and Development.
Jarrett, A. R. 2001. “Soil erosion research for the 21st century.” In Designing sedimentation basins for better sediment trapping. Honolulu: American Society of Agricultural Engineers.
Kalpakjian, S., and S. R. Schmid. 2017. Manufacturing processes for engineering materials. London: Pearson Education.
Liu, Y., B. A. Engel, D. C. Flanagan, M. W. Gitau, S. K. McMillan, and I. Chaubey. 2017. “A review on effectiveness of best management practices in improving hydrology and water quality: Needs and opportunities.” Sci. Total Environ. 601 (Dec): 580–593. https://doi.org/10.1016/j.scitotenv.2017.05.212.
MacKenzie, K. A. 2016. Detention basin alternative outlet design study. Denver: Colorado DOT.
McCaleb, M. M., and R. A. McLaughlin. 2008. “Sediment trapping by five different sediment detention devices on construction sites.” Trans. ASAE 51 (5): 1613–1621. https://doi.org/10.13031/2013.25318.
Millen, J. A., A. R. Jarrett, and J. W. Faircloth. 1997. “Experimental evaluation of sedimentation basin performance for alternative dewatering systems.” Trans. ASAE 40 (4): 1087–1095. https://doi.org/10.13031/2013.21361.
National Oceanic and Atmospheric Administration (NOAA). 2010. “Fact sheet: Skimmers.” Accessed November 18, 2019. ftp://ftp.library.noaa.gov/noaa_documents.lib/DWH_IR/reports/Skimmers_Fact_Sheets.716959.pdf.
Pilon, B. S., J. S. Tyner, and D. C. Yoder. 2016. “Advanced storm water skimmer with no moving parts.” J. Irrig. Drain. Eng. 142 (8): 04016027. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001030.
Toso, J., and I. Peterson. 2014. Implementation of floating weir system for surface skimming of temporary Storm water ponds. St. Paul, MN: Minnesota DOT.
USEPA. 1997. Urbanization and streams: Studies of hydrological impacts. Washington, DC: USEPA.
Ward, A. D., C. T. Haan, and B. J. Barfield. 1979. “Prediction of sediment basin performance.” Trans. ASAE 22 (1): 126–136. https://doi.org/10.13031/2013.34978.
Washington State DOT. 2019. Temporary erosion and sediment control manual. Olympia, WA: Washington State DOT.
Wilson, B. N., and B. J. Barfield. 1985. “Modeling sediment detention ponds using reactor theory and advection-diffusion concepts.” Water Resour. Res. 21 (4): 523–532. https://doi.org/10.1029/WR021i004p00523.
Zech, W. C., C. P. Logan, and X. Fang. 2014. “State of the practice: Evaluation of sediment basin design, construction, maintenance, and inspection procedures.” Pract. Period. Struct. Des. Constr. 19 (2): 04014006. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000172.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jan 23, 2020
Accepted: May 18, 2020
Published online: Jul 10, 2020
Published in print: Sep 1, 2020
Discussion open until: Dec 10, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.