Synthesis of Cement Composites Utilizing Ceramic Waste as a Partial Replacement for Portland Cement: Literature Review
Publication: Journal of Hazardous, Toxic, and Radioactive Waste
Volume 25, Issue 4
Abstract
The unchecked emissions of hazardous gases emanating from the cement industry have effectuated much research geared toward utilizing solid waste materials as cement replacements. This study addressed the incorporation of ceramic waste (CW) from the ceramic industry, as well as construction and demolition waste materials, as cement replacement in cementitious products. The focus was on appraising the influence of the addition of CW on the fresh and hardened properties of cementitious materials, such as cement paste, mortar, vibrated concrete, and self-compacting concrete. The reviewed literature attested to the potential pozzolanic activity of CW, thereby supporting the viability of such substitutions. The utilization of CW at lower substitution levels produces satisfactory workability. The strength level of the composites incorporating up to 15% CW is either superior to, or comparable with, that of a control mix containing no ceramic additive. Benefits to the durability performance of CW-additive cement are apparent, prompting the prospective usage of such additives even at high replacement levels of up to 40%. Microstructural investigations have substantiated the densification and refinement of the pore structure of cement resulting from CW-related pozzolanic activity. This evaluation indicates that CW usage presents a viable choice for attaining favorable properties in cement composites while concurrently realizing ecological benefits.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alarab, A., B. Hamad, G. Chehab, and J. J. Assaad. 2020. “Use of ceramic-waste powder as value-added pozzolanic material with improved thermal properties.” J. Mater. Civ. Eng. 32 (9): 04020243. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003326.
Aly, S. T., A. S. El-Dieb, and M. R. Taha. 2019. “Effect of high-volume ceramic waste powder as partial cement replacement on fresh and compressive strength of self-compacting concrete.” J. Mater. Civ. Eng. 31 (2): 04018374. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002588.
Amin, M., B. A. Tayeh, and I. S. Agwa. 2020. “Effect of using mineral admixtures and ceramic wastes as coarse aggregates on properties of ultrahigh-performance concrete.” J. Cleaner Prod. 273: 123073. https://doi.org/10.1016/j.jclepro.2020.123073.
Anderson, D. J., S. T. Smith, and F. T. K. Au. 2016. “Mechanical properties of concrete utilising waste ceramic as coarse aggregate.” Constr. Build. Mater. 117: 20–28. https://doi.org/10.1016/j.conbuildmat.2016.04.153.
Arenas, C., L. F. Vilches, C. Leiva, B. Alonso-Fariñas, and M. Rodríguez-Galán. 2016. “Recycling ceramic industry wastes in sound absorbing materials.” Mater. Constr. 66 (324): e106. https://doi.org/10.3989/mc.2016.10615.
ASTM. 2017. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, ASTM C618–12a. West Conshohocken, PA: ASTM.
Awoyera, P. O., J. O. Akinmusuru, and A. Moncea. 2017. “Hydration mechanism and strength properties of recycled aggregate concrete made using ceramic blended cement.” Cogent Eng. 4 (1): 1282667. https://doi.org/10.1080/23311916.2017.1282667.
Azevedo, A. R. G., C. M. F. Vieira, W. M. Ferreira, K. C. P. Faria, L. G. Pedroti, and B. C. Mendes. 2020. “Potential use of ceramic waste as precursor in the geopolymerization reaction for the production of ceramic roof tiles.” J. Build. Eng. 29: 101156. https://doi.org/10.1016/j.jobe.2019.101156.
Balegh, B., H. Sellaf, and A. Hadjmostefa. 2020. “Effect of ceramic waste on mechanical and geotechnical properties of tuff treated by cement.” Case Stud. Constr. Mater. 13: e00368. https://doi.org/10.1016/j.cscm.2020.e00368.
Bignozzi, M. C., and A. Saccani. 2012. “Ceramic waste as aggregate and supplementary cementing material: A combined action to contrast alkali silica reaction (ASR).” Cem. Concr. Compos. 34 (10): 1141–1148. https://doi.org/10.1016/j.cemconcomp.2012.07.001.
Cheng, Y.-h., F. Huang, R. Liu, J.-l. Hou, and G.-l. Li. 2016. “Test research on effects of waste ceramic polishing powder on the permeability resistance of concrete.” Mater. Struct. 49 (3): 729–738.
Dos Santos Adorno, C., M. H. F. de Medeiros, J. H. Filho, and G. C. Réus. 2018. “Effects of the addition of red ceramic, limestone filler and rice husk ash in alkali silica reaction.” J. Build. Pathol. Rehabil. 3 (1): 1–11. https://doi.org/10.1007/s41024-017-0030-0.
EFNARC (European Federation of National Associations Representing for Concrete). 2005. The European guidelines for self-compacting concrete: Specification, production and use. Hampshire, UK: European Federation of National Trade Associations Representing Producers and Applicators of Specialist Building Products. Accessed October 29, 2016. http://www.efnarc.org/pdf/SCCGuidelinesMay2005.pdf.
El-Dieb, A. S., and D. M. Kanaan. 2018. “Ceramic waste powder an alternative cement replacement—Characterization and evaluation.” Sustainable Mater. Technol. 17: e00063. https://doi.org/10.1016/j.susmat.2018.e00063.
El-Gamal, S. M. A., F. I. El-Hosiny, M. S. Amin, and D. G. Sayed. 2017. “Ceramic waste as an efficient material for enhancing the fire resistance and mechanical properties of hardened Portland cement pastes.” Constr. Build. Mater. 154: 1062–1078. https://doi.org/10.1016/j.conbuildmat.2017.08.040.
El-Kattan, I. M., M. A. Abdelzaher, and A. A. Farghali. 2020. “Positive impact of ultra fine-ceramic waste on the physico-mechanical features and microstructure of white cement pastes composites.” J. Mater. Res. Technol. 9 (4): 9395–9402. https://doi.org/10.1016/j.jmrt.2020.05.087.
European Commission. 2007. Reference document on best available techniques in the ceramic manufacturing industry. Brussels, Belgium: European Commission.
Ferrara, L., P. Deegan, A. Pattarini, M. Sonebi, and S. Taylor. 2019. “Recycling ceramic waste powder: Effects its grain-size distribution on fresh and hardened properties of cement pastes/mortars formulated from SCC mixes.” J. Sustainable Cem.-Based Mater. 8 (3): 145–160. https://doi.org/10.1080/21650373.2018.1564396.
Gautam, L., J. K. Jain, P. Kalla, and S. Choudhary. 2021. “A review on the utilization of ceramic waste in sustainable construction products.” Mater. Today: Proc. 43: 1884–1891. https://doi.org/10.1016/j.matpr.2020.10.829.
Gonzalez-Corominas, A., and M. Etxeberria. 2014. “Properties of high performance concrete made with recycled fine ceramic and coarse mixed aggregates.” Constr. Build. Mater. 68: 618–626. https://doi.org/10.1016/j.conbuildmat.2014.07.016.
Heidari, A., and D. Tavakoli. 2013. “A study of the mechanical properties of ground ceramic powder concrete incorporating nano-SiO2 particles.” Constr. Build. Mater. 38: 255–264. https://doi.org/10.1016/j.conbuildmat.2012.07.110.
Higashiyama, H., M. Sappakittipakorn, M. Sano, and F. Yagishita. 2012a. “Chloride ion penetration into mortar containing ceramic waste aggregate.” Constr. Build. Mater. 33: 48–54. https://doi.org/10.1016/j.conbuildmat.2012.01.018.
Higashiyama, H., F. Yagishita, M. Sano, and O. Takahashi. 2012b. “Compressive strength and resistance to chloride penetration of mortars using ceramic waste as fine aggregate.” Constr. Build. Mater. 26 (1): 96–101. https://doi.org/10.1016/j.conbuildmat.2011.05.008.
Indian Council of Ceramic Tiles and Sanitaryware. 2019. “Global industry insight.” ICCTAS Magazine 9: 6.
Islam, R., T. H. Nazifa, A. Yuniarto, A. S. M. Shanawaz Uddin, S. Salmiati, and S. Shahid. 2019. “An empirical study of construction and demolition waste generation and implication of recycling.” Waste Manage. (Oxford) 95: 10–21. https://doi.org/10.1016/j.wasman.2019.05.049.
Ji, R., Z. Zhang, Y. He, L. Liu, and X. Wang. 2015. “Synthesis, characterization and modeling of new building insulation material using ceramic polishing waste residue.” Constr. Build. Mater. 85: 119–126. https://doi.org/10.1016/j.conbuildmat.2015.03.089.
Kannan, D. M., S. H. Aboubakr, A. S. El-Dieb, and M. M. Reda Taha. 2017. “High performance concrete incorporating ceramic waste powder as large partial replacement of Portland cement.” Constr. Build. Mater. 144: 35–41. https://doi.org/10.1016/j.conbuildmat.2017.03.115.
Katzer, J. 2013. “Strength performance comparison of mortars made with waste fine aggregate and ceramic fume.” Constr. Build. Mater. 47: 1–6. https://doi.org/10.1016/j.conbuildmat.2013.04.039.
Kočí, V., J. Maděra, M. Jerman, J. Žumár, D. Koňáková, M. Čáchová, E. Vejmelková, P. Reiterman, and R. Černý. 2016. “Application of waste ceramic dust as a ready-to-use replacement of cement in lime-cement plasters: An environmental-friendly and energy-efficient solution.” Clean Technol. Environ. Policy 18 (6): 1725–1733. https://doi.org/10.1007/s10098-016-1183-2.
Kulovaná, T., E. Vejmelková, M. Keppert, P. Rovnaníková, Z. Keršner, and R. Černý. 2016. “Mechanical, durability and hygrothermal properties of concrete produced using Portland cement-ceramic powder blends.” Struct. Concr. 17 (1): 105–115. https://doi.org/10.1002/suco.201500029.
Lasseuguette, E., S. Burns, D. Simmons, E. Francis, H. K. Chai, V. Koutsos, and Y. Huang. 2019. “Chemical, microstructural and mechanical properties of ceramic waste blended cementitious systems.” J. Cleaner Prod. 211: 1228–1238. https://doi.org/10.1016/j.jclepro.2018.11.240.
Li, L., W. Liu, Q. You, M. Chen, and Q. Zeng. 2020a. “Waste ceramic powder as a pozzolanic supplementary filler of cement for developing sustainable building materials.” J. Cleaner Prod. 259: 120853. https://doi.org/10.1016/j.jclepro.2020.120853.
Li, L., W. Liu, Q. You, M. Chen, Q. Zeng, C. Zhou, and M. Zhang. 2020b. “Relationships between microstructure and transport properties in mortar containing recycled ceramic powder.” J. Cleaner Prod. 263: 121384. https://doi.org/10.1016/j.jclepro.2020.121384.
Li, L. G., Z. Y. Zhuo, A. K. H. Kwan, T. S. Zhang, and D. G. Lu. 2020c. “Cementing efficiency factors of ceramic polishing residue in compressive strength and chloride resistance of mortar.” Powder Technol. 367: 163–171. https://doi.org/10.1016/j.powtec.2020.03.050.
Li, L. G., Z. Y. Zhuo, J. Zhu, J. J. Chen, and A. K. H. Kwan. 2019. “Reutilizing ceramic polishing waste as powder filler in mortar to reduce cement content by 33% and increase strength by 85%.” Powder Technol. 355: 119–126. https://doi.org/10.1016/j.powtec.2019.07.043.
Medina, C., P. F. G. Banfill, M. I. Sánchez de Rojas, and M. Frías. 2013. “Rheological and calorimetric behaviour of cements blended with containing ceramic sanitary ware and construction/demolition waste.” Constr. Build. Mater. 40: 822–831. https://doi.org/10.1016/j.conbuildmat.2012.11.112.
Mohammadhosseini, H., N. H. A. S. Lim, M. M. Tahir, R. Alyousef, H. Alabduljabbar, and M. Samadi. 2019a. “Enhanced performance of green mortar comprising high volume of ceramic waste in aggressive environments.” Constr. Build. Mater. 212: 607–617. https://doi.org/10.1016/j.conbuildmat.2019.04.024.
Mohammadhosseini, H., N. H. A. S. Lim, M. M. Tahir, R. Alyousef, and M. Samadi. 2019b. “Performance evaluation of green mortar comprising ceramic waste as cement and fine aggregates replacement.” SN Appl. Sci. 1 (6): 1–7. https://doi.org/10.1007/s42452-019-0566-5.
Mohit, M., and Y. Sharifi. 2019. “Thermal and microstructure properties of cement mortar containing ceramic waste powder as alternative cementitious materials.” Constr. Build. Mater. 223: 643–656. https://doi.org/10.1016/j.conbuildmat.2019.07.029.
Pacheco-Torgal, F., and S. Jalali. 2010. “Reusing ceramic wastes in concrete.” Constr. Build. Mater. 24 (5): 832–838. https://doi.org/10.1016/j.conbuildmat.2009.10.023.
Pacheco-Torgal, F., and S. Jalali. 2011. “Compressive strength and durability properties of ceramic wastes based concrete.” Mater. Struct. 44 (1): 155–167.
Pavlík, Z., A. Trník, T. Kulovaná, L. Scheinherrová, V. Rahhal, E. Irassar, and R. Černý. 2016. “DSC and TG analysis of a blended binder based on waste ceramic powder and portland cement.” Int. J. Thermophys. 37 (3): 1–14. https://doi.org/10.1007/s10765-016-2043-3.
Penteado, C. S. G., E. Viviani de Carvalho, and R. C. C. Lintz. 2016. “Reusing ceramic tile polishing waste in paving block manufacturing.” J. Cleaner Prod. 112: 514–520. https://doi.org/10.1016/j.jclepro.2015.06.142.
Pereira-de-Oliveira, L. A., J. P. Castro-Gomes, and P. M. S. Santos. 2012. “The potential pozzolanic activity of glass and red-clay ceramic waste as cement mortars components.” Constr. Build. Mater. 31: 197–203. https://doi.org/10.1016/j.conbuildmat.2011.12.110.
Pliatsikas, I., E. Robou, M. Samouhos, N. S. Katsiotis, and P. E. Tsakiridis. 2019. “Valorization of demolition ceramic wastes and lignite bottom ash for the production of ternary blended cements.” Constr. Build. Mater. 229: 116879. https://doi.org/10.1016/j.conbuildmat.2019.116879.
Rajawat, D., S. Siddique, S. Shrivastava, S. Chaudhary, and T. Gupta. 2018. “Influence of fine ceramic aggregates on the residual properties of concrete subjected to elevated temperature.” Fire Mater. 42 (7): 834–842. https://doi.org/10.1002/fam.2639.
Rashad, A. M., and G. M. F. Essa. 2020. “Effect of ceramic waste powder on alkali-activated slag pastes cured in hot weather after exposure to elevated temperature.” Cem. Concr. Compos. 111: 103617. https://doi.org/10.1016/j.cemconcomp.2020.103617.
Raval, A. D., D. I. N. Patel, and P. J. Pitroda. 2013. “Reuse of ceramic industry waste for the elaboration of eco-efficient concrete.” Int. J. Adv. Eng. Res. Stud. 2 (3): 103–105.
Ray, S., M. Haque, S. A. Soumic, A. F. Mita, M. M. Rahman, and B. B. Tanmoy. 2021. “Use of ceramic wastes as aggregates in concrete production: A review.” J. Build. Eng. 43: 102567. https://doi.org/10.1016/j.jobe.2021.102567.
Reiterman, P., O. Holčapek, R. Jaskulski, and W. Kubissa. 2020. “Long-term behaviour of ceramic powder containing concrete for pavement blocks.” Int. J. Pavement Eng. 1–8. https://doi.org/10.1080/10298436.2020.1725006.
Sáez del Bosque, I. F., P. Van den Heede, N. De Belie, M. I. Sánchez de Rojas, and C. Medina. 2020. “Carbonation of concrete with construction and demolition waste based recycled aggregates and cement with recycled content.” Constr. Build. Mater. 234: 117336. https://doi.org/10.1016/j.conbuildmat.2019.117336.
Samadi, M., G. F. Huseien, H. Mohammadhosseini, H. S. Lee, N. H. Abdul Shukor Lim, M. M. Tahir, and R. Alyousef. 2020. “Waste ceramic as low cost and eco-friendly materials in the production of sustainable mortars.” J. Cleaner Prod. 266: 121825. https://doi.org/10.1016/j.jclepro.2020.121825.
Sánchez de Rojas, M. I., M. Frías, O. Rodríguez, and J. Rivera. 2014. “Durability of blended cement pastes containing ceramic waste as a pozzolanic addition.” J. Am. Ceram. Soc. 97 (5): 1543–1551. https://doi.org/10.1111/jace.12882.
Shamsaei, M., R. Khafajeh, and I. Aghayan. 2019. “Laboratory evaluation of the mechanical properties of roller compacted concrete pavement containing ceramic and coal waste powders.” Clean Technol. Environ. Policy 21 (3): 707–716. https://doi.org/10.1007/s10098-018-1657-5.
Siddique, S., S. Shrivastava, and S. Chaudhary. 2018a. “Durability properties of bone china ceramic fine aggregate concrete.” Constr. Build. Mater. 173: 323–331. https://doi.org/10.1016/j.conbuildmat.2018.03.262.
Siddique, S., S. Shrivastava, and S. Chaudhary. 2018b. “Evaluating resistance of fine bone china ceramic aggregate concrete to sulphate attack.” Constr. Build. Mater. 186: 826–832. https://doi.org/10.1016/j.conbuildmat.2018.07.138.
Siddique, S., S. Shrivastava, S. Chaudhary, and T. Gupta. 2018c. “Strength and impact resistance properties of concrete containing fine bone china ceramic aggregate.” Constr. Build. Mater. 169: 289–298. https://doi.org/10.1016/j.conbuildmat.2018.02.213.
Silva, J., J. de Brito, and R. Veiga. 2008. “Fine ceramics replacing cement in mortars partial replacement of cement with fine ceramics in rendering mortars.” Mater. Struct. 41 (8): 1333–1344.
Subaşı, S., H. Öztürk, and M. Emiroğlu. 2017. “Utilizing of waste ceramic powders as filler material in self-consolidating concrete.” Constr. Build. Mater. 149: 567–574. https://doi.org/10.1016/j.conbuildmat.2017.05.180.
Sun, Z., H. Cui, H. An, D. Tao, Y. Xu, J. Zhai, and Q. Li. 2013. “Synthesis and thermal behavior of geopolymer-type material from waste ceramic.” Constr. Build. Mater. 49: 281–287. https://doi.org/10.1016/j.conbuildmat.2013.08.063.
Vejmelková, E., M. Keppert, P. Rovnaníková, M. Ondráček, Z. Keršner, and R. Černý. 2012. “Properties of high performance concrete containing fine-ground ceramics as supplementary cementitious material.” Cem. Concr. Compos. 34 (1): 55–61. https://doi.org/10.1016/j.cemconcomp.2011.09.018.
Yang, Z., Z. Qiang, M. Guo, G. Yi, Y. Shi, F. Cheng, and M. Zhang. 2020. “Pilot and industrial scale tests of high-performance permeable bricks producing from ceramic waste.” J. Cleaner Prod. 254: 120167. https://doi.org/10.1016/j.jclepro.2020.120167.
Zito, S. V., E. F. Irassar, and V. F. Rahhal. 2020. “Management of sanitary ware wastes as supplementary cementing materials in concretes.” J. Sustainable Cem.-Based Mater. 9 (1): 35–49. https://doi.org/10.1080/21650373.2019.1673258.
Information & Authors
Information
Published In
Journal of Hazardous, Toxic, and Radioactive Waste
Volume 25 • Issue 4 • October 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Mar 1, 2021
Accepted: Jun 14, 2021
Published online: Aug 4, 2021
Published in print: Oct 1, 2021
Discussion open until: Jan 4, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Pawan Kumar, Pasla Dinakar, T. Jothi Saravanan, Development and Mechanical Performance of Self-Compacting Lightweight Aggregate Concrete Using Sintered Fly Ash Aggregates, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17831, 36, 7, (2024).
- Junbo Liu, Xiaozhen Zhang, Zhixi Mai, Yongqing Wang, Shaohua Wang, Yebing Cai, Junli Feng, Preparation and Properties of Environmentally Friendly Resin-Based Artificial Stones Fabricated from Ceramic Waste, Buildings, 10.3390/buildings13020570, 13, 2, (570), (2023).
- A. Anita, S. Karthika, P. V. Divya, Construction and Demolition Waste as Valuable Resources for Geosynthetic-Encased Stone Columns, Journal of Hazardous, Toxic, and Radioactive Waste, 10.1061/JHTRBP.HZENG-1175, 27, 2, (2023).
- Ming Tao, Daoming Lu, Ying Shi, Chengqing Wu, Utilization and life cycle assessment of low activity solid waste as cementitious materials: A case study of titanium slag and granulated blast furnace slag, Science of The Total Environment, 10.1016/j.scitotenv.2022.157797, 849, (157797), (2022).
- Pooja Jain, Rajesh Gupta, Sandeep Chaudhary, Comprehensive assessment of ceramic ETP sludge waste as a SCM for the production of concrete, Journal of Building Engineering, 10.1016/j.jobe.2022.104973, 57, (104973), (2022).
- Feng Cao, Hongxia Qiao, Yuanke Li, Xiuyuan Shu, Lijun Cui, Effect of highland barley straw ash admixture on properties and microstructure of concrete, Construction and Building Materials, 10.1016/j.conbuildmat.2021.125802, 315, (125802), (2022).
- Debadrita Das, T. Jothi Saravanan, K. I. Syed Ahmed Kabeer, Kunal Bisht, A Critical Review of Utilization of Sugarcane Bagasse Ash in Concrete as Partial Replacement to Cement, Recent Advances in Materials, Mechanics and Structures, 10.1007/978-981-19-3371-4_56, (667-682), (2022).