Entropic Friction Factor Modeling for Mineral Slurry Flow in Pressurized Pipes
Publication: Journal of Hydraulic Engineering
Volume 147, Issue 12
Abstract
The principle of maximum entropy (PME) relies on information theory, Shannon entropy, and four constraints, namely the total probability and conservation laws of mass, momentum, and energy. This paper applies PME theory to an exactly accurate data set available in the literature to develop a model that relates the friction factor () to the entropy parameter (). The proposed model exhibits fair adherence to the experimental data, and it was validated by multiphase flow pumping tests with concentrated iron ore slurry. Extending the use of the proposed model for multiphase flow, particularly mineral slurries, allows for the determination of apparent viscosity and Reynolds number without resorting to rheological measurement. The deviations between the parameter obtained from the proposed model and that reported in the literature were smaller than 5% for the iron ore slurry. It has been demonstrated that the PME is a particularly important tool for hydraulic systems, especially in multiphase flow such as that of mineral slurries containing a high content of solids.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and codes generated by or used in the study appear in the published article.
Acknowledgments
The authors are grateful to CNPq (Grant No. 314974/2018-0), CAPES, and FAPESP (Grant No. 2014/22926-5) for sponsoring the research presented here. Vale S.A. and the Vale Institute of Technology are also acknowledged for providing the iron ore samples.
References
Bogue, D. C., and A. B. Metzner. 1963. “Velocity profiles in turbulent pipe flow. Newtonian and non-Newtonian fluids.” Ind. Eng. Chem. Fundam. 2 (2): 143–149. https://doi.org/10.1021/i160006a010.
Bombardelli, F. A., and M. H. García. 2003. “Hydraulic design of large-diameter pipes.” J. Hydraul. Eng. 129 (11): 839–846. https://doi.org/10.1061/(ASCE)0733-9429(2003)129:11(839).
Chiu, C. L. 1987. “Entropy and probability concepts in hydraulics.” J. Hydraul. Eng. 113 (5): 583–599. https://doi.org/10.1061/(ASCE)0733-9429(1987)113:5(583).
Chiu, C. L. 1988. “Entropy and 2-D velocity distribution in open channels.” J. Hydraul. Eng. 114 (7): 738–756. https://doi.org/10.1061/(ASCE)0733-9429(1988)114:7(738).
Chiu, C. L. 1989. “Velocity distribution in open channel flow.” J. Hydraul. Eng. 115 (5): 576–594. https://doi.org/10.1061/(ASCE)0733-9429(1989)115:5(576).
Chiu, C. L., and J. D. Chiou. 1986. “Structure of 3-D flow in rectangular open channels.” J. Hydraul. Eng. 112 (11): 1050–1067. https://doi.org/10.1061/(ASCE)0733-9429(1986)112:11(1050).
Chiu, C. L., and S. M. Hsu. 2006. “Probabilistic approach to modeling of velocity distributions in fluid flows.” J. Hydrol. 316 (1–4): 28–42. https://doi.org/10.1016/j.jhydrol.2005.04.011.
Chiu, C. L., W. Jin, and Y. C. Chen. 2000. “Mathematical models of distribution of sediment concentration.” J. Hydraul. Eng. 126 (1): 16–23. https://doi.org/10.1061/(ASCE)0733-9429(2000)126:1(16).
Chiu, C. L., G. F. Lin, and J. M. Lu. 1993. “Application of probability and entropy concepts in pipe-flow study.” J. Hydraul. Eng. 119 (6): 742–756. https://doi.org/10.1061/(ASCE)0733-9429(1993)119:6(742).
Chiu, C. L., and C. A. A. Said. 1995. “Maximum and mean velocities and entropy in open-channel flow.” J. Hydraul. Eng. 121 (1): 26–35. https://doi.org/10.1061/(ASCE)0733-9429(1995)121:1(26).
Lofrano, F. C., D. M. Morita, F. A. Kurokawa, and P. A. Souza. 2019. “New general maximum entropy model for flow through porous media.” Transp. Porous Media 131 (2): 681–703. https://doi.org/10.1007/s11242-019-01362-3.
Mckeon, B. J., J. Li, W. Jiang, J. F. Morrison, and A. J. Smits. 2004a. “Further observations on the mean velocity distribution in fully developed pipe flow.” J. Fluid Mech. 501: 135–147. https://doi.org/10.1017/S0022112003007304.
Mckeon, B. J., C. J. Swanson, M. V. Zagarola, R. J. Donnelly, and A. J. Smits. 2004b. “Friction factors for smooth pipe flow.” J. Fluid Mech. 511: 41–44. https://doi.org/10.1017/S0022112004009796.
Mckeon, B. J., M. V. Zagarola, and A. J. Smits. 2005. “A new friction factor relationship for fully developed pipe flow.” J. Fluid Mech. 538: 429–443. https://doi.org/10.1017/S0022112005005501.
Nikuradse, J. 1933. Laws of flow in rough pipe. Technical Memorandum 1292. Washington, DC: National Advisory Committee for Aeronautics.
Peker, S. M., and Ş. Ş. Helvaci. 2008. Solid-liquid two phase flow. Amsterdam, Netherlands: Elsevier.
Schlichting, H. 1979. Boundary-layer theory. New York: McGraw-Hill Book.
Senapati, P. K., and B. K. Mishra. 2014. “Rheological characterization of concentrated jarosite waste suspensions using Couette & tube rheometry techniques.” Powder Technol. 263 (Sep): 58–65. https://doi.org/10.1016/j.powtec.2014.04.092.
Singh, V. P. 1997. “The use of entropy in hydrology and water resources.” Hydrol. Process. 11 (6): 587–626. https://doi.org/10.1002/(SICI)1099-1085(199705)11:6%3C587::AID-HYP479%3E3.0.CO;2-P.
Singh, V. P. 2011. “Hydrologic synthesis using entropy theory: Review.” J. Hydrol. Eng. 16 (5): 421–433. https://doi.org/10.1061/(ASCE)HE.1943-5584.0000332.
Singh, V. P. 2013. Entropy theory and its application in environmental and water engineering. Chichester, UK: Wiley, Blackwell.
Singh, V. P. 2014. Entropy theory in hydraulic engineering: An introduction. Reston, VA: ASCE.
Souza, P. A., and E. L. Moraes. 2017. “The flow resistance factor treated by the maximum entropy principle.” Int. J. Hydraul. Eng. 6 (1): 1–8.
Swanson, C. J., B. Julian, G. G. Ihas, and R. J. Donnelly. 2002. “Pipe flow measurements over a wide range of Reynolds numbers using liquid helium and various gases.” J. Fluid Mech. 461: 51–60. https://doi.org/10.1017/S0022112002008595.
Whiten, W., P. Steffens, and J. Hitchins. 1993. “An examination of pulp viscosity in tubes at higher shear rates.” Miner. Eng. 6 (4): 397–404. https://doi.org/10.1016/0892-6875(93)90018-I.
Wilson, K. C., G. R. Addie, A. Sellgren, and R. Clift. 2006. slurry transport using centrifugal pumps. New York: Springer.
Zagarola, M. V., and A. J. Smits. 1998. “Mean-flow scaling of turbulent pipe flow.” J. Fluid Mech. 373: 33–79. https://doi.org/10.1017/S0022112098002419.
Zeghadnia, L., J. L. Robert, and B. Achour. 2019. “Explicit solutions for turbulent flow friction factor: A review, assessment and approaches classification.” Ain Shams Eng. J. 10 (1): 243–252. https://doi.org/10.1016/j.asej.2018.10.007.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: May 5, 2020
Accepted: Jun 9, 2021
Published online: Sep 23, 2021
Published in print: Dec 1, 2021
Discussion open until: Feb 23, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.