Modeling and Design of the Buenos Aires Outfalls
Publication: Journal of Hydraulic Engineering
Volume 143, Issue 2
Abstract
Field studies, modeling, and the design of two major outfalls to discharge domestic wastewater from Buenos Aires, Argentina, into the Río de la Plata are described. Extensive data were gathered from current profilers, Lagrangian drifters, meteorological stations, and water column profiling. The river is essentially freshwater and is the main water source for the city; it is tidally dominated, shallow, and well-mixed vertically. The data were used to develop a two-dimensional hydrodynamic model of the river that closely simulated its major features. The wastewater disposal strategy and special design and modeling considerations of the outfalls and diffusers are discussed. The tidal currents will recirculate the wastewater back and forth over the diffuser several times before it is flushed away by the mean river flow. Because of the shallow water and low flushing currents, it is not possible to achieve the high near-field dilutions typical of deep-water marine outfalls, and other design constraints include the proximity to water intakes. Lagrangian particle-tracking modeling approaches were used to predict the fate and transport of the effluent and its dilution. The models reproduce near-field mixing at moderate to high current speeds and also reentrainment due to the reversing tide without the need for special model coupling. However, dilutions at low current speeds were corrected to account for the jet momentum and reentrainment. The near-field jet modeling to determine the riser and port designs is discussed. Bacterial impacts decreased rapidly with distance from the diffuser and no impacts on the shoreline or water intakes were predicted. The effects of sudestadas were also modeled and it was concluded that they will not significantly affect water quality for the proposed outfalls.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are indebted to Agua y Saneamientos Argentinos (AySA) for their enlightened support for this complex project and Menahem Libhaber, Lead Sanitary Engineer of the World Bank, for his consistent advice and encouragement. Much of the data were gathered by AySA and the consortium Estudio de Ingeniería Hidráulica S. A. and Ezcurra & Schmidt. We are also grateful for the expertise and discussions with Dr. Angel Menendez, Chief of the Hydraulics Computational Program at the Instituto Nacional del Agua (INA), Argentina. The authors are indebted to Professor Joseph Lee, Hong Kong University of Science and Technology for providing Visjet.
References
AySA (Agua y Saneamientos Argentinos). (2008). “Modelización Río de La Plata.”, Informe de Avance, Buenos Aires, Argentina.
Blumberg, A. F., and Georgas, N. (2008). “Quantifying uncertainty in estuarine and coastal ocean circulation modeling.” J. Hydraul. Eng., 403–415.
Delft3D [Computer software]. Deltares, Delft, Netherlands.
Eih. (2009). “Proyecto de desarrollo sustentable de la cuenca Matanza-Riachuelo, Recopilación de datos Hidrometeorológicos para el Río de La Plata.”, Agua y Saneamientos Argentinos, Buenos Aires, Argentina.
Escobar, G., Vargas, W., and Bischoff, S. (2004). “Wind tides in the Rio de la Plata estuary: Meteorological conditions.” Int. J. Climatol., 24(9), 1159–1169.
Fischer, H. B., List, E. J., Koh, R. C. Y., Imberger, J., and Brooks, N. H. (1979). Mixing in inland and coastal waters, Academic Press, New York.
Framiñan, M. B., and Brown, O. B. (1996). “Study of the Río de la Plata turbidity front—Part 1: Spatial and temporal distribution.” Cont. Shelf Res., 16(10), 1259–1282.
Hunt, C. D., Mansfield, A. D., Mickelson, M. J., Albro, C. S., Geyer, W. R., and Roberts, P. J. W. (2010). “Plume tracking and dilution of effluent from the Boston sewage outfall.” Mar. Environ. Res., 70(2), 150–161.
Jaime, P., and Menéndez, A. (2002). “Análisis del Régimen Hidrológico de los ríos Paraná y Uruguay.”, Buenos Aires, Argentina.
Jirka, G. H. (2004). “Initial and preliminary evaluation design strategy—Berazátegui diffuser outfall.” AySA, Buenos Aires, Argentina.
Lai, A. C. H., Yu, D., and Lee, J. H. W. (2011). “Mixing of a rosette jet group in a crossflow.” J. Hydraul. Eng., 787–803.
Menéndez, A. N. (2002). “Description and modeling of the hydrosedimentologic mechanisms in the Río de la Plata River.” Instituto Nacional del Agua INA, Buenos Aires, Argentina.
Piedra-Cueva, I., and Fossati, M. (2007). “Residual currents and corridor of flow in the Río de la Plata.” Appl. Math. Modell., 31(3), 564–577.
Roberts, P. J. W. (1999). “Modeling the Mamala Bay plumes—II: Far field.” J. Hydraul. Eng., 574–583.
Roberts, P. J. W., and Snyder, W. H. (1993). “Hydraulic model study for the Boston outfall—I: Riser configuration.” J. Hydraul. Eng., 970–987.
Roberts, P. J. W., and Villegas, B. (2010). “Modelling the proposed Buenos Aires outfalls.”, Agua y Saneamientos Argentinos (AySA), Atlanta.
SAyDS (Secretaría de Ambiente y Desarrollo Sustentable). (2009). “Usos y Objetivos de Calidad de los cuerpos de agua en el área de influencia del Proyecto de Desarrollo Sustentable de la Cuenca Matanza-Riachuelo.” Buenos Aires, Argentina.
Wells, P. G., and Daborn, G. R. (1997). “The Rio de la Plata an environmental overview.” Dalhousie Univ., Halifax, NS, Canada, 273.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Feb 23, 2016
Accepted: Jul 12, 2016
Published online: Sep 8, 2016
Published in print: Feb 1, 2017
Discussion open until: Feb 8, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.