Abstract
Current methods utilized in scaling sediment transport in unsteady open-channel flow result in a number of model and scale effects, decreasing the accuracy and applicability of scale models. Identifying the conditions under which the governing equations of sediment transport are self-similar, and require no sediment diameter or density scaling, can reduce scale effects and increase model applicability. Conditions for self-similarity of one-dimensional unsteady suspended sediment transport are identified by applying the one-parameter Lie group of point scaling transformations, both for the general case and with unscaled sediment diameters. Under the scaling ratio relations found when holding sediment diameter to be unscaled, sediment diameter, density, critical and total shear, porosity, kinematic viscosity, and particle Reynolds number are all unscaled. It is shown that under Lie group scaling, the unsteady one-dimensional suspended sediment transport process as an initial-boundary value problem in the prototype domain can be self-similar with that of a variety of different scaled domains. The scaled values of sediment variables at specified temporal and spatial locations can then be upscaled to the corresponding values in the prototype domain.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aksoy, H., and Kavvas, M. L. (2005). “A review of hillslope and watershed scale erosion and sediment transport models.” Catena, 64(2–3), 247–271.
Armanini, A., and di Silvio, G. (1988). “A one-dimensional model for the transport of a sediment mixture in non-equilibrium conditions.” J. Hydraul. Res., 26(3), 275–292.
ASCE. (2000). “Hydraulic modeling.”, New York.
Bluman, G. W., and Anco, S. C. (2002). “Symmetry and integration methods for differential equations.” Applied mathematical sciences, Vol. 154, Springer, New York.
Chanson, H. (1999). The hydraulics of open channel flow, Edward Arnold, London.
Dufresne, M., Dewals, B., Erpicum, S., Achambeau, P., and Pirotton, M. (2012). “Flow patterns and sediment deposition in rectangular shallow reservoirs.” Water Environ., 26(4), 504–510.
Einstein, H., and Chien, N. (1956). “Similarity of distorted river models with movable beds.” Trans. Am. Soc. Civ. Eng., 121(1), 440–462.
Ercan, A., Kavvas, M. L., and Haltas, I. (2014). “Scaling and self-similarity in one-dimensional unsteady open channel flow.” Hydrol. Processes, 28(5), 2721–2737.
Fang, H., He, G., Liu, J., and Chen, M. (2008). “3D numerical investigation of distorted scale in hydraulic physical model experiments.” J. Coastal Res., 52, 41–54.
Frostick L. E., McLelland S. J., and Mercer T. G., eds. (2011). Users guide to physical modeling and experimentation: Experience of the HYDRALAB network, CRC Press, Leiden, Netherlands.
Graf, W. H. (1971). Hydraulics of sediment transport, McGraw-Hill, New York.
Haltas, I., and Kavvas, M. L. (2011). “Scale invariance and self-similarity in hydrologic processes in space and time.” J. Hydrol. Eng., 51–63.
Han, Q. (1980). “A study on the non-equilibrium transportation of suspended load.” Proc., Int. Symp. on River Sedimentation, Beijing.
Hartman, W. J., Amorocho, J., and de Vries, J. J. (1979). “Peripheral canal intake studies 1.”, Dept. of Land, Air and Water Resources, Univ. of California, Davis, CA.
Heller, V. (2011). “Scale effects in physical hydraulic engineering models.” J. Hydraul. Res., 49(3), 293–306.
Henriquez, M., Reniers, A., Ruessink, B., Stive, M., Stanton, T., and Foster, D. (2008). “On the scaling of sediment transport in the nearshore.” Proc., 2nd Int. Conf. on the Application of Physical Modelling to Port and Coastal Protection—Coastlab ’08, International Association for Hydro-Environmental Engineering and Research, Bari, Italy, 193–204.
Ho, H. C., Muste, M., Plenner, S., and Firoozfar, A. (2013). “Complementary experiments for hydraulic modeling of multi-box culverts.” Can. J. Civ. Eng., 40(4), 324–333.
Kantoush, S., Bollaert, E., and Schleiss, A. (2008). “Experimental and numerical modelling of sedimentation in a rectangular shallow basin.” Int. J. Sediment Res., 23(3), 212–232.
Kocyigit, O., Lin, B., and Falconer, R. A. (2005). “Modelling sediment transport using a lightweight bed material.” Marit. Eng., 158(1), 3–14.
Lu, J., Liao, X., and Zhao, G. (2013). “Experimental study of effect of geometric distortion upon suspended sediments in bending channels.” Sediment. Geol., 294(10), 27–36.
Martins, R. (1989). Recent advances in hydraulic physical modeling NATO ASI series E: Applied sciences, Vol. 165, Kluwer Academic Publishers, Dordrecht, Leiden, Netherlands.
Phillips, B. C., and Sutherland, A. J. (1989). “Spatial lag effects in bed load sediment transport.” J. Hydraul. Res., 27(1), 115–133.
Polyanin, A. D., and Manzhirov, A. V. (2006). Handbook of mathematics for engineers and scientists, 1st Ed., Chapman & Hall, London.
Pugh, C., and Dodge, A. (1991). “Design of sediment models.” Proc., 5th Federal Interagency Sedimentation Conf., Federal Energy Regulatory Commission, Washington, DC.
Wu, W. (2008). Computational river dynamics, Taylor & Francis, London.
Wu, W., and Vieira, D. A. (2002). “One-dimensional channel network model CCHE1D 3.0—Technical manual.”, National Center for Computational Hydroscience and Engineering, Univ. of Mississippi, University, MS.
Wu, W., Vieira, D. A., and Wang, S. (2004). “One-dimensional numerical model for nonuniform sediment transport under unsteady flows in channel networks.” J. Hydraul. Eng., 914–923.
Yalin, M. (1989). “Fundamentals of hydraulic physical modelling.” Recent advances in hydraulic physical modelling, NATO ASI series E: Applied sciences, R. Martin, ed., Vol. 165, Kluwer Academic Publishers, Dordrecht, Netherlands.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Feb 3, 2014
Accepted: Dec 9, 2014
Published online: Jan 23, 2015
Published in print: May 1, 2015
Discussion open until: Jun 23, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.