Influence of Vertical Resolution and Nonequilibrium Model on Three-Dimensional Calculations of Flow and Sediment Transport
Publication: Journal of Hydraulic Engineering
Volume 136, Issue 2
Abstract
This note, using a three-dimensional model of river flow and sediment transport, examines the effect of the vertical resolution and the choice a nonequilibrium adaptation length in predicting flow and sediment transport around groins in China’s Yongding River. The results show that a fine vertical grid and nonequilibrium sediment transport model provide good predictions, especially on the river bed profile with an obvious main channel and flood plain.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research work is supported by the National Science Foundation of China (Grant No. UNSPECIFIED10872110) and Water Project (Grant No. UNSPECIFIED2008ZX07209-002), Beijing, China. Thanks to Mr. Roger Olesen, associated editor and anonymous reviewers’ suggestion and to polish English of the paper.
References
Engelund, F. (1974). “Flow and bed topography in channel bends.” J. Hydraul. Eng., 100(11), 1631–1648.
Fang, H. W. (2000). “Three-dimensional calculations of flow and bed-load transport in the Elbe river.” Rep. No. 763, Institute for Hydromechanics, University of Karlsruhe, Germany.
Fang, H. W., Liu, B., and Huang, B. B. (2006). “Diagonal Cartesian method for numerical simulation of flow and suspended sediment transport over complex boundaries.” J. Hydraul. Eng., 132(11), 1195–1205.
Fang, H. W., and Rodi, W. (2003). “Three-dimensional calculations of flow and suspended sediment transport in the neighborhood of the dam for the Three Gorges Project (TGP) reservoir in the Yangtze River.” J. Hydraul. Res., 41(4), 379–394.
Fang, H. W., and Wang, G. Q. (2000). “Three-dimensional mathematical model of suspended-sediment transport.” J. Hydraul. Eng., 126(8), 578–592.
Ge, L., Sotiropoulos, F., and Sturm, T. (2005). “3D unsteady RANS modeling of complex hydraulic engineering flows. II: Model validation and flow physics.” J. Hydraul. Eng., 131(9), 809–820.
Ikeda, S. (1981). “Self-formed straight channels in sandy beds.” J. Hydraul. Eng., 107(4), 389–406.
Jia, Y., Scott, S., Xu, Y., Huang, S., and Wang, S. S.-Y. (2005). “Three-dimensional numerical simulation and analysis of flows around a submerged weir in a channel bend way.” J. Hydraul. Eng., 131(8), 682–693.
Jin, K. R., Hamrick, J. H., and Tisdale, T. (2000). “Application of three-dimensional hydrodynamic model for Lake Okeechobee.” J. Hydraul. Eng., 126(10), 758–771.
Nagata, N., Hosoda, T., Nakato, T., and Muramoto, Y. (2005). “Three-dimensional numerical model for flow and bed deformation around river hydraulic structures.” J. Hydraul. Eng., 131(12), 1074–1087.
Odgaard, A. J. (1981). “Transverse bed slope in alluvial channel bends.” J. Hydraul. Eng., 107(12), 1677.
Olsen, N. R. B. (2003). “Three-dimensional CFD modeling of self-forming meandering channel.” J. Hydraul. Eng., 129(5), 366–372.
Parker, G. (1984). “Discussion of lateral bed load transport on side slope.” J. Hydraul. Eng., 110(2), 197–199.
Phillips, B. C., and Sutherland, A. J. (1989). “Spatial lag effects in bed load sediment transport.” J. Hydraul. Res., 27(1), 115–133.
Rahuel, J. L., Holly, F. M., Chollet, J. P., Belleudy, P. J., and Yang, G. (1989). “Modeling of riverbed evolution for bedload sediment mixtures.” J. Hydraul. Eng., 115(11), 1521–1542.
Rodi, W. (1993). “Turbulence models and their applications in hydraulics—A state of the art review.” IAHR monograph, 3rd Ed., Balkema, Rotterdam.
Sekine, M., and Parker, G. (1992). “Bed-load transport on transverse slope. I.” J. Hydraul Eng., 118(4), 513–535.
Shimizu, Y., Yamaguchi, H., and Itakura, T. (1990). “Three-dimensional computation of flow and bed deformation.” J. Hydraul. Eng., 116(9), 1090–1108.
Struiksma, N., Olsen, K. W., Flokstra, C., and De Vriend, H. J. (1985). “Bed deformation in curved alluvial channels.” J. Hydraul. Res., 23(1), 57–79.
Thuc, T. (1991). “Two-dimensional morphological computations near hydraulic structures.” Ph.D. dissertation, Asian Institute of Technology, Bangkok, Thailand.
Uijttewaal, W. S. J. (2005). “Effects of groin layout on the flow in groin fields: Laboratory experiments.” J. Hydraul. Eng., 131(9), 782–791.
van Rijn, L. C. (1984). “Sediment transport, Part I: Bed load transport.” J. Hydraul. Eng., 110(10), 1431–1456.
van Rijn L. C. (1987). “Mathematical modeling of morphological processes in the case of suspended sediment transport.” Delft Hydraulics Rep. No. 382, Delft Hydraulics, The Netherlands.
Wu, W. M., Rodi, W., and Wenka, T. (2000). “3-D calculations of flow and sediment transport in rivers.” J. Hydraul. Eng., 126(1), 4–15.
Zhang, R. J., and Xie, J. H. (1993). Sedimentation research in China—Systematic selections, China Water and Power, Beijing.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Oct 28, 2006
Accepted: Jul 8, 2009
Published online: Jan 15, 2010
Published in print: Feb 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.