Probabilistic Stormwater Runoff and Water Quality Modeling of a Highway in Suburban Maryland
Publication: Journal of Hydrologic Engineering
Volume 23, Issue 2
Abstract
The U.S. EPA Storm Water Management Model (SWMM) was used to simulate upland runoff production and the subsequent performance of a downstream, ponded infiltration basin installed adjacent to a highway in suburban Maryland. The SWMM’s performance was evaluated with a unique, rich suite of in situ flow and water quality observations. The availability of these in situ observations creates a novel opportunity to explore the performance of SWMM across small scales in space and time. In order to systematically explore the ability of SWMM to leverage these observations, an automatic Monte Carlo–based calibration framework was developed and a multiparameter sensitivity analysis was conducted. As expected, the calibrated model showed better skill in terms of reproducing water quantity observations relative to water quality observations. An uncertainty analysis showed model predictions (flow and water quality) were consistent in the sense that the model was able to encapsulate the observations between 5 and 95% confidence intervals. Example code for use by other researchers to employ the techniques discussed in this paper is made publicly available with this manuscript.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by a Summer Graduate Fellowship from the Maryland Water Resources Research Center, Grant No. 2015MD332B. Special appreciation goes to Poornima Natarajan for sharing her data.
References
Abrishamchi, A., Massoudieh, A., and Kayhanian, M. (2010). “Probabilistic modeling of detention basins for highway stormwater runoff pollutant removal efficiency.” Urban Water J., 7(6), 357–366.
Akan, A. O., and Houghtalen, R. J. (2003). Urban hydrology, hydraulics, and stormwater quality: Engineering applications and computer modeling, Wiley, New York.
Alias, N., Liu, A., Egodawatta, P., and Goonetilleke, A. (2014). “Sectional analysis of the pollutant wash-off process based on runoff hydrograph.” J. Environ. Manage., 134, 63–69.
Alley, W. M., and Smith, P. E. (1981). “Estimation of accumulation parameters for urban runoff quality modeling.” Water Resour. Res., 17(6), 1657–1664.
ASCE. (1992). Design and construction of urban stormwater management systems, Reston, VA.
Athayde, D. N. (1984). Results of the nationwide urban runoff program, National Technical Information Service, Springfield, VA.
Ayyub, B. M., and McCuen, R. H. (2011). Probability, statistics, and reliability for engineers and scientists, CRC Press, Boca Raton, FL.
Barco, J., Wong, K. M., and Stenstrom, M. K. (2008). “Automatic calibration of the U.S. EPA SWMM model for a large urban catchment.” J. Hydraul. Eng., 466–474.
Bengtsson, L., Grahn, L., and Olsson, J. (2005). “Hydrological function of a thin extensive green roof in southern Sweden.” Nordic Hydrol., 36(3), 259–268.
Benke, K. K., Lowell, K. E., and Hamilton, A. J. (2008). “Parameter uncertainty, sensitivity analysis and prediction error in a water-balance hydrological model.” Math. Comput. Model., 47(11–12), 1134–1149.
Bertrand-Krajewski, J. L., Briat, P., and Scrivener, O. (1993). “Sewer sediment production and transport modelling: A literature review.” J. Hydraul. Res., 31(4), 435–460.
Beven, K. (2006). “A manifesto for the equifinality thesis.” J. Hydrol., 320(1–2), 18–36.
Beven, K., and Binley, A. (1992). “The future of distributed models: Model calibration and uncertainty prediction.” Hydrol. Process., 6(3), 279–298.
Beven, K., and Freer, J. (2001). “Equifinality, data assimilation, and uncertainty estimation in mechanistic modelling of complex environmental systems using the GLUE methodology.” J. Hydrol., 249(1), 11–29.
Bizier, P. (2007). Gravity sanitary sewer design and construction, ASCE, Reston, VA.
Burszta-Adamiak, E., and Mrowiec, M. (2013). “Modelling of green roofs’ hydrologic performance using EPA’s SWMM.” Water Sci. Technol., 68(1), 36–42.
Chang, F. J., and Delleur, J. W. (1992). “Systematic parameter estimation of watershed acidification model.” Hydrol. Process., 6(1), 29–44.
Choi, J., Harvey, J., and Conklin, M. (2000). “Use of multi-parameter sensitivity analysis to determine relative importance of factors influencing natural attenuation of mining contaminants.” Water Resour. Res., 36(6), 1511–1518.
Cronshey, R. (1986). Urban hydrology for small watersheds, Soil Conservation Service, Parramatta, Australia, 13.
Deletic, A. B., and Maksimovic, C. T. (1998). “Evaluation of water quality factors in storm runoff from paved areas.” J. Environ. Eng., 869–879.
Dunne, T., and Leopold, L. B. (1978). Water in environmental planning, Macmillan, Melbourne, Australia.
Gironás, J., Roesner, L. A., Davis, J., Rossman, L. A., and Supply, W. (2009). Storm water management model applications manual, U.S. Environmental Protection Agency, Cincinnati.
Ha, S. J., and Stenstrom, M. K. (2008). “Predictive modeling of storm-water runoff quantity and quality for a large urban watershed.” J. Environ. Eng., 703–711.
Hornberger, G. M., and Spear, R. C. (1981). “Approach to the preliminary analysis of environmental systems.” J. Environ. Manage., 12(1), 7–18.
Hsu, M. H., Chen, S., and Chang, T.-J. (2000). “Inundation simulation for urban drainage basin with storm sewer system.” J. Hydrol., 234(1), 21–37.
Huber, W. C., Dickinson, R. E., Barnwell, T. O. Jr., and Branch, A. (1988). Storm water management model, version 4, U.S. Environmental Protection Agency, Environmental Research Laboratory, Washington, DC.
Jang, S., et al. (2007). “Using SWMM as a tool for hydrologic impact assessment.” Desalination, 212(1), 344–356.
Jewell, T. K., and Adrian, D. D. (1978). “SWMM stormwater pollutant washoff functions.” J. Environ. Eng. Div., 104(5), 1036–1040.
Jiang, L., Chen, Y., and Wang, H. (2015). “Urban flood simulation based on the SWMM model.” Proc., RSHS14 and ICGRHWE14, Vol. 368, IAHS Press, Wallingford, U.K., 186–191.
Khader, O., and Montalto, F. A. (2008). “Development and calibration of a high resolution SWMM model for simulating the effects of LID retrofits on the outflow hydrograph of a dense urban watershed.” Proc., 2008 Int. Low Impact Development Conf., ASCE, Reston, VA.
Kibler, D. F. (1982). Urban stormwater hydrology, American Geophysical Union, Washington, DC.
Konrad, C. P., and Booth, D. B. (2005). “Hydrologic changes in urban streams and their ecological significance.” Am. Fish. Soc. Symp., 2005(47), 157–177.
Lee, J., Bang, K., Ketchum, L., Choe, J., and Yu, M. (2002). “First flush analysis of urban storm runoff.” Sci. Total Environ., 293(1), 163–175.
Legates, D. R., and McCabe, G. J. (1999). “Evaluating the use of ‘goodness-of-fit’ measures in hydrologic and hydroclimatic model validation.” Water Resour. Res., 35(1), 233–241.
Li, F., Duan, H. F., Yan, H., and Tao, T. (2015). “Multi-objective optimal design of detention tanks in the urban stormwater drainage system: Framework development and case study.” Water Resour. Manage., 29(7), 2125–2137.
Loucks, D. P., Van Beek, E., Stedinger, J. R., Dijkman, J. P. M., and Villars, M. T. (2005). Water resources systems planning and management: An introduction to methods, models and applications, UNESCO, Paris.
Mannina, G., and Viviani, G. (2010). “An urban drainage stormwater quality model: Model development and uncertainty quantification.” J. Hydrol., 381(3–4), 248–265.
Massoudieh, A., Abrishamchi, A., and Kayhanian, M. (2008). “Mathematical modeling of first flush in highway storm runoff using genetic algorithm.” Sci. Total Environ., 398(1–3), 107–121.
McCuen, R. H. (1989). Hydrologic analysis and design, Prentice-Hall, Englewood Cliffs, NJ.
McCuen, R. H., Johnson, P. A., and Ragan, R. M. (1996). “Highway hydrology: Hydraulic design series No. 2.”, Federal Highway Administration, Washington, DC.
Modugno, M., et al. (2015). “Build-up/wash-off monitoring and assessment for sustainable management of first flush in an urban area.” Sustainability, 7(5), 5050–5070.
Muleta, M. K., and Nicklow, J. W. (2005). “Sensitivity and uncertainty analysis coupled with automatic calibration for a distributed watershed model.” J. Hydrol., 306(1), 127–145.
Nash, J., and Sutcliffe, J. V. (1970). “River flow forecasting through conceptual models. I: A discussion of principles.” J. Hydrol., 10(3), 282–290.
Natarajan, P. (2012). “Evaluation of transitional performance of a stormwater infiltration basin managing highway runoff.” Ph.D. thesis, Univ. of Maryland, College Park, MD.
Natarajan, P., and Davis, A. P. (2015). “Performance of a ‘transitioned’ infiltration basin. 1: TSS, metals, and chloride removals.” Water Environ. Res., 87(9), 823–834.
Natarajan, P., and Davis, A. P. (2016a). “Ecological assessment of a transitioned stormwater infiltration basin.” Ecol. Eng., 90, 261–267.
Natarajan, P., and Davis, A. P. (2016b). “Performance of a ‘transitioned’ infiltration basin. 2: Nitrogen and phosphorus removals.” Water Environ. Res., 88(4), 291–302.
NOAA (National Oceanic and Atmospheric Administration). (2017). “Data tools: Local climatological data (LCD).” National Centers for Environmental Information, Asheville, NC.
Obropta, C. C., and Kardos, J. S. (2007). “Review of urban stormwater quality models: Deterministic, stochastic, and hybrid approaches.” J. Am. Water Resour. Assoc., 43(6), 1508–1523.
Paul, M. J., and Meyer, J. L. (2001). “Streams in the urban landscape.” Ann. Rev. Ecol. Syst., 32(1), 333–365.
Penman, H. L. (1948). “Natural evaporation from open water, bare soil and grass.” Proc., Royal Society of London A: Mathematical, Physical and Engineering Sciences, Vol. 193, The Royal Society, London, 120–145.
Prevention, P. (2005). “National management measures to control nonpoint source pollution from urban areas.” Environmental Protection Agency, Cincinnati.
Rawls, W. J., Brakensiek, D. L., and Miller, N. (1983). “Green-ampt infiltration parameters from soils data.” J. Hydraul. Eng., 62–70.
Rossman, L. A., et al. (2004). “SWMM 5-the next generation of EPA’s storm water management model.” Innovative modeling of urban water systems, W. James, ed., Computational Hydraulics International, Guelph, ON, Canada.
Rossman, L. A. (2010). Storm water management model user’s manual, version 5.0, U.S. Environmental Protection Agency, Cincinnati.
Santhi, C., Arnold, J. G., Williams, J. R., Dugas, W. A., Srinivasan, R., and Hauck, L. M. (2001). “Validation of the SWAT model on a large river basin with point and nonpoint sources.” J. Am. Water Resour. Assoc., 37(5), 1169–1188.
Sartor, J. D., Boyd, G. B., and Agardy, F. J. (1974). “Water pollution aspects of street surface contaminants.” J. Water Pollut. Control Fed., 46(3), 458–467.
Shinma, T. A., and Reis, L. F. R. (2014). “Incorporating multi-event and multi-site data in the calibration of SWMM.” Procedia Eng., 70, 75–84.
Shuttleworth, W. J. (2012). Terrestrial hydrometeorology, Wiley, New York.
Tobio, J. A. S., Maniquiz-Redillas, M. C., and Kim, L. H. (2015). “Optimization of the design of an urban runoff treatment system using stormwater management model (SWMM).” Desalin. Water Treat., 53(11), 3134–3141.
Tsihrintzis, V. A., and Hamid, R. (1998). “Runoff quality prediction from small urban catchments using SWMM.” Hydrol. Process., 12(2), 311–329.
USGS. (2017). “USGS high resolution orthoimagery.” ⟨https://lta.cr.usgs.gov/high_res_ortho⟩ (Jul. 1, 2014).
Van Liew, M. W., Arnold, J. G., and Garbrecht, J. D. (2003). “Hydrologic simulation on agricultural watersheds: Choosing between two models.” Trans. ASAE, 46(6), 1539–1551.
Wang, J. (2017). “Example code for SWMM auto-calibration.” ⟨https://github.com/jingwang89/swmm⟩ (Jun. 5, 2017).
Wang, L., Lyons, J., and Kanehl, P. (2003). “Impacts of urban land cover on trout streams in Wisconsin and Minnesota.” Trans. Am. Fish. Soc., 132(5), 825–839.
Zaghloul, N. A. (1998). “Flow simulation in circular pipes with variable roughness using SWMM-EXTRAN model.” J. Hydraul. Eng., 73–76.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Nov 9, 2016
Accepted: Jul 12, 2017
Published online: Dec 8, 2017
Published in print: Feb 1, 2018
Discussion open until: May 8, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.