Preliminary Design Aid for Bioretention Filters
Publication: Journal of Hydrologic Engineering
Volume 18, Issue 3
Abstract
A physically based mathematical model is developed in this study for the hydrologic process taking place in a bioretention filter. The hydrologic storage equation is adopted to determine the variation of water depth in the ponding area. The Green and Ampt equations are used to model the movement of water in the underlying storage zone, or soil filter, taking into account the finite depth of the filter. The perforated drain pipes placed at the bottom of a soil filter are represented by atmospheric pressure at this location. The ponding area and the soil filter equations are coupled through the infiltration term. The governing equations are written in terms of a set of dimensionless parameters and are solved numerically by using an explicit finite-difference scheme. The solutions to the dimensionless governing equations are also in terms of dimensionless parameters, and they can be generalized on the basis of the principle of hydrologic similarity. A series of solutions is obtained for numerous and systematically chosen combinations of filter size and hydrologic and soil conditions and is presented in chart form. These charts can be used as a design aid for quick preliminary sizing of new bioretention filters and quick evaluation of existing filters.
Get full access to this article
View all available purchase options and get full access to this article.
References
Asleson, B. C., Nestingen, R. S., Gulliver, J. S., Hozalski, R. M., and Nieber, J. L. (2009). “Performance assessment of rain gardens.” J. Am. Water Resour. Assoc., 45(4), 1019–1031.
Boufadel, M. C. (1998). “Unit hydrographs derived from the Nash model.” J. Am. Water Resour. Assoc., 34, 167–177.
Brown, R. A. (2010). “Bioretention literature review.” 〈http://www.bae.ncsu.edu/topic/bioretention/research-Lit_Review.html〉 (Dec. 10, 2010).
Davis, A. P. (2008). “Field performance of bioretention: Hydrology impacts.” J. Hydrol. Eng., 13(2), 90–95.
Davis, A. P., Hunt, W. F., Traver, R. G., and Clar, M. E. (2009). “Bioretention technology: An overview of current practice and future needs.” J. Environ. Eng., 135(3), 109–117.
Dietz, M. E., and Clausen, J. C. (2005). “A field evaluation of rain garden flow and pollutant treatment.” Water Air Soil Pollut., 167, 123–138.
Dietz, M. E., and Clausen, J. C. (2008). “Stormwater runoff and export changes with development in a traditional and low impact subdivision.” J. Environ. Manage., 87(4), 560–566.
Dussailant, A., Cozetto, K., Brander, K., and Potter, K. (2003). “Green-Ampt model of a rain garden and comparison to Richards equation model.” The sustainable world, WIT Press, Southampton, United Kingdom, 891–900.
Dussailant, A. R., Wu, C. H., and Potter, K. W. (2004). “Richards equation model of a rain garden.” J. Hydrol. Eng., 9(3), 219–225.
Hatt, B. E., Fletcher, T. D., and Deletic, A. (2009). “Hydrologic and pollutant removal performance of stormwater biofiltration systems at the field scale.” J. Hydrol., 365(3–4), 310–321.
Heasom, W., Traver, A. G., and Welker, A. (2006). “Hydrologic modeling of a bioinfiltration best management practice.” J. Am. Water Resour. Assoc., 42(5), 1329–1347.
Hunt, W. F., Smith, J. T., Jadlocki, S. J., Hathaway, J. M., and Eubanks, P. R. (2008). “Pollutant removal and peak flow mitigation by a bioretention cell in urban Charlotte, NC.” J. Environ. Eng., 134(5), 403–408.
Li, H., and Davis, A. P. (2009). “Water quality improvement through reduction of pollutant loads using bioretention.” J. Environ. Eng., 135(8), 567–576.
Li, H., Sharkey, L. J., Hunt, W. F., and Davis, A. P. (2009). “Mitigation of impervious surface hydrology using bioretention in North Carolina and Maryland.” J. Hydrol. Eng., 14(4), 407–415.
Nash, J. E. (1959). “Systematic determination of unit hydrograph parameters.” J. Geophys. Res., 64(1), 111–115.
Prince George’s County Dept. of Environmental Resources (PGDER). (1993). Design manual for use of bioretention in stormwater management, Division of Environmental Management, Watershed Protection Branch, Landover, MD.
Rawls, W. J., Brakensiek, D. L., and Miller, N. (1983). “Green and Ampt infiltration parameters from soils data.” J. Hydraul. Eng., 109(1), 62–70.
Schroeder, P. R., Aziz, N. M., Lloyd, C. M., and Zappi, P. A. (1994). The hydrologic evaluation of landfill performance (HELP) model: User’s guide for version 3, U.S. Environmental Protection Agency, Office of Research and Development, Washington, DC.
Soil Conservation Service. (1985). SCS national engineering handbook, U.S. Dept. of Agriculture, Washington, DC.
U.S. Army Corps of Engineers (USACE). (2001). Hydrologic modeling system HEC-HMS user’s manual v2.1, Hydrologic Engineering Center, Davis, CA.
U.S. Environmental Protection Agency. (1999). “Stormwater technology fact sheet—bioretention.”, Office of Water, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Mar 31, 2011
Accepted: Dec 12, 2011
Published online: Feb 15, 2013
Published in print: Mar 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.