Modeling Techniques of Best Management Practices: Rain Barrels and Rain Gardens Using EPA SWMM-5
Publication: Journal of Hydrologic Engineering
Volume 15, Issue 6
Abstract
It is well established that the excess storm-water runoff volume from impervious areas can lead to impairments and water pollution originating from the sewer system overflow and combined sewer systems overflow. This redirection of the runoff into wastewater treatment plants and stream channels can also deprive shallow groundwater tables with recharge, as an impervious surface prevents water from infiltrating to aquifers. The runoff from impervious areas and, in particular, directly connected impervious areas, has been proven to cause the majority of the problem. Controlling the runoff at its source and disconnecting the impervious area from the sewer system is a way to resolve and reduce the impact of excess runoff. This is achieved by implementing specialized detention technologies for runoff reduction. This paper builds on new modeling techniques of two best management practices, rain gardens and rain barrels, implemented in the EPA storm-water management model Version 5 (SWMM-5). The behaviors of a continuously draining rain barrel and an overflowing rain barrel were studied under steady state and unsteady state conditions using C++ and MATLAB programs. The models obtained were compared to a rain barrel conceived within the EPA SWMM-5 subcatchment architecture. Next, a model input was derived to best describe the behavior of a treatment train for water quantity composed of a rain garden, the overflowing rain barrel, and/or the continuously draining rain barrel. A simulated rainfall event in EPA SWMM-5 assesses the results of each subcatchment’s model input and estimates the potential percentage of runoff reduction and the potential reduction in the peak flow and timing of outflow.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alley, W. M., and Veenhuis, J. E. (1983). “Effective impervious area in urban runoff modeling.” J. Hydrol. Eng., 109(2), 313–319.
Arnold, C. L., and Gibbons, C. J. (1996). “Impervious surface coverage: The emergence of a key environmental indicator.” J. Am. Plan. Assn., 62(2), 243–258.
Booth, D. B., and Jackson, C. R. (1997). “Urbanization of aquatic systems: Degradation thresholds, storm-water detection and the limits of mitigation.” J. Am. Water Resour. Assoc., 33(5), 1077–1090.
Burges, S. J., Stoker, B. A., Wigmosta, M. S., and Moeller, R. A. (1989). “Hydrological information and analysis required for mitigating hydrologic effects of urbanization.” Water Resources Ser. Tech. Rep. No. 137, Dept. of Civil Engineering, Univ. of Washington, Seattle.
Crowe, C. T., Roberson, J. A., and Elger, D. F. (2000). Engineering fluid mechanics, 7th Ed., John Wiley & Sons, Canada.
Dinicola, R. S. (1989). “Characterization and simulation of rainfall-runoff relations for headwater basins in western King and Snohomish Counties, Washington State.” U.S. Geological Survey Water Resources Investigations Rep. No. 89-4052.
Dussaillant, A. R., Wu, C. H., and Potter, K. W. (2004). “Richards equation model of a rain garden.” J. Hydrol. Eng., 9(3), 219–225.
Ferguson, B. K. (1990). “Role of the long-term water balance in management of storm-water infiltration.” J. Environ. Manage., 30(3), 221–233.
Field, R., and O’Connor, T. P. (1997). “Optimization of CSO storage and treatment systems.” J. Environ. Eng., 123(3), 269–274.
Huber, W. C. (2001). “New options for overland flow routing in SWMM.” Urban Drainage Modeling, Proc., ASCE EWRI 2001 Conf., 22–29.
Lee, J. G., and Heaney, J. P. (2003). “Estimation of urban imperviousness and its impact on storm-water systems.” J. Water Resour. Plann. Manage., 129(5), 419–426.
Leopold, L. B. (1968). “Hydrology for urban land planning: A guidebook on the hydrologic effect of land use.” U.S. Geological Survey Circular No. 554.
Lerch, N. K., Hale, W. F., and Lemaster, D. D. (1982). Soil survey of Hamilton County, Ohio, U.S., Dept. of Agriculture and Ohio Dept. of Natural Resources, Ohio.
Rossman, L. A. (2005). Storm-water management model; version 5.0, National Risk Management Research Laboratory, U.S. Environmental Protection Agency, Cincinnati.
Thurston, H. W., Goddard, H. C., Szlag, D., and Lemberg, B. (2003). “Controlling storm-water runoff with tradable allowances for impervious surfaces.” J. Water Resour. Plann. Manage., 129(5), 409–418.
Wigmosta, M. S., Burges, S. J., and Meena, J. M. (1994). “Modeling and monitoring to predict spatial and temporal hydrologic characteristics in small catchments.” Water Resources Series Tech. Rep. No. 137, Dept. of Civil Engineering, Univ. of Washington, Seattle.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Nov 19, 2008
Accepted: May 28, 2009
Published online: May 30, 2009
Published in print: Jun 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.