Geotechnical Characterization of Fine-Grained Spoil Material from Surface Coal Mines
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 147, Issue 7
Abstract
Coal mines produce large amounts of excavated waste soils, known as spoils. These materials can cover vast areas, are typically dumped in heaps without any treatment, and are difficult to exploit for engineering purposes because of their significant variability. Efficient exploitation of spoil heaps poses engineering challenges, related mainly to the involved degree of uncertainty. A small number of studies have attempted to characterize the geotechnical properties of spoil material; however, there remains a considerable gap in understanding how to deal with spoil materials in the context of sustainable development and civil infrastructure design. In this work, a systematic effort is made to quantify the uncertainty of the geotechnical properties of a particular spoil heap. Laboratory test results based on an extended investigation of a spoil material originating from lignite coal mines are gathered in one database and thoroughly analyzed. The results reveal and quantify the significant spoil material variability, which is contrasted against data for common soils, while a systematic approach is proposed for spoil material characterization.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some data that support the findings of this study are available from the corresponding author upon reasonable request (analyzed results based on extended geotechnical investigation).
Some data generated or used during the study are proprietary or confidential in nature and may only be provided with restrictions (raw data of the geotechnical investigation).
Acknowledgments
This work has received funding from the European Union’s Research Fund for Coal and Steel under the projects “SLOPES - Smarter Lignite Open Pit Engineering Solutions” Grant No. RFCR-CT-2015-00001 and “SUMAD - Sustainable Use of Mining Waste Dumps” Grant No. 847227. Financial assistance by the European Commission is greatly appreciated. The authors are also thankful to the Public Power Corporation (P.P.C.) for kindly providing raw data, based on which this study was performed.
References
Alves Dias, P., et al. 2018. EU coal regions: Opportunities and challenges ahead—EUR 29292 EN. Luxembourg: Publications Office of the European Union.
ASTM. 1966. Standard test method for unconfined compressive strength of cohesive soil. ASTM D2166-66. West Conshohocken, PA: ASTM.
ASTM. 1980. Standard test methods for one-dimensional consolidation properties of soils using incremental loading. ASTM D2435-80. West Conshohocken, PA: ASTM.
ASTM. 1982. Standard test method for consolidated undrained triaxial compression test for cohesive soils. ASTM D2850-82. West Conshohocken, PA: ASTM.
ASTM. 1983. Standard test methods for liquid limit, plastic limit, and plasticity index of soils. ASTM D4318-83. West Conshohocken, PA: ASTM.
ASTM. 2006. Standard test method for sieve analysis of fine and coarse aggregates. ASTM C136. West Conshohocken, PA: ASTM.
ASTM. 2010. Standard test methods for laboratory determination of water (moisture) content of soil and rock by mass. ASTM D2216. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard test methods for specific gravity of soil solids by water pycnometer.” ASTM D854-14. West Conshohocken, PA: ASTM.
Baecher, G. B., and J. T. Christian. 2003. Reliability and statistics in geotechnical engineering. Chichester, UK: Wiley.
Bell, F. G., and L. J. Donnelly. 2006. Mining and its impact on the environment. New York: Taylor & Francis.
Benson, C. H. 1993. “Probability distributions for hydraulic conductivity of compacted soil liners.” J. Geotech. Eng. 119 (3): 471–486. https://doi.org/10.1061/(ASCE)0733-9410(1993)119:3(471).
Bian, Z., X. Miao, S. Lei, S.-E. Chen, W. Wang, and S. Struthers. 2012. “The challenges of reusing mining and mineral-processing wastes.” Science 337 (6095): 702–703. https://doi.org/10.1126/science.1224757.
Cadierno, J. F., M. I. G. Romero, A. J. Valdés, J. M. M. del Pozo, J. G. González, D. R. Robles, and J. V. Espinosa. 2014. “Characterization of colliery spoils in León: Potential uses in rural infrastructures.” Geotech. Geol. Eng. 32 (2): 439–452. https://doi.org/10.1007/s10706-013-9725-4.
Cherubini, C. 2000. “Reliability evaluation of shallow foundation bearing capacity on c′, φ′ soils.” Can. Geotech. J. 37 (1): 264–269. https://doi.org/10.1139/t99-096.
Dawson, R. F., N. R. Morgenstern, and A. W. Stokes. 1998. “Liquefaction flowslides in Rocky Mountain coal mine waste dumps.” Can. Geotech. J. 35 (2): 328–343. https://doi.org/10.1139/t98-009.
EURACOAL. 2018. “EURACOAL market report 1/2018-5/2018.” In European association for coal and lignite. Brussels, Belgium: EURACOAL.
Fityus, S., H. Robertson, L. Bradfield, and J. Simmons. 2014. “Unsaturated shear strength of coal mine spoil.” In Proc., 6th Int. Conf. on Unsaturated Soils: Research and Applications, 1335–1340. Boca Raton, FL: CRC Press.
Harr, M. E. 1987. Reliability-based design in civil engineering. New York: McGraw-Hill.
Holtz, R. D., W. D. Kovacs, and T. C. Sheahan. 2010. An introduction to geotechnical engineering. Englewood Cliffs, NJ: Prentice Hall.
Işık, N. S. 2009. “Estimation of swell index of fine grained soils using regression equations and artificial neural networks.” Sci. Res. Essays 4 (10): 1047–1056.
Kavvadas, M., C. Roumpos, and P. Schilizzi. 2020. “Stability of deep excavation slopes in continuous surface lignite mining systems.” Geotech. Geol. Eng. 38 (1): 791–812. https://doi.org/10.1007/s10706-019-01066-x.
Leonards, G. A. 1976. Estimating consolidation settlements of shallow foundations on overconsolidated clay. Washington, DC: Transportation Research Board.
Li, G., S. Cao, Y. Li, and Z. Zhang. 2016. “Load bearing and deformation characteristics of granular spoils under unconfined compressive loading for coal mine backfill.” Adv. Mater. Sci. Eng. 2016 (1): 8530574. https://doi.org/10.1155/2016/8530574.
Lumb, P. 1970. “Safety factors and the probability distribution of soil strength.” Can. Geotech. J. 7 (3): 225–242. https://doi.org/10.1139/t70-032.
Lumb, P. 1974. “Application of statistics in soil mechanics.” In Soil mechanics: New horizons, edited by I. K. Lee. London: Newnes-Butterworths.
Masoudian, M. S., I. E. Zevgolis, A. V. Deliveris, A. M. Marshall, C. M. Heron, and N. C. Koukouzas. 2019. “Stability and characterisation of spoil heaps in European surface lignite mines: A state-of-the-art review in light of new data.” Environ. Earth Sci. 78 (16): 505. https://doi.org/10.1007/s12665-019-8506-7.
Means, R. E., and J. V. Parcher. 1963. Physical properties of soils. Columbus, OH: C.E. Merrill Books.
Okagbue, C. O. 1984. “The geotechnical characteristics and stability of a spoil heap at a southwestern Pennsylvania coal mine, U.S.A.” Eng. Geol. 20 (4): 325–341. https://doi.org/10.1016/0013-7952(84)90060-7.
Orr, T. L. L., and E. R. Farrell. 2000. Geotechnical design to Eurocode 7. New York: Springer.
Poulsen, B., M. Khanal, A. M. Rao, D. Adhikary, and R. Balusu. 2014. “Mine overburden dump failure: A case study.” Geotech. Geol. Eng. 32 (2): 297–309. https://doi.org/10.1007/s10706-013-9714-7.
Roumpos, C., F. Pavloudakis, A. Liakoura, D. Nalmpanti, and K. Arampatzis. 2018. “Utilisation of lignite resources within the context of a changing electricity generation mix.” In Proc., 10th Jubilee Int. Brown Coal Mining Congress, 355–365. Bełchatów, Poland: International Congress of Brown Coal.
Schneider, H. R. 1997. “Panel discussion: Definition and determination of characteristic soil properties.” In Proc., 14th Int. Conf. on Soil Mechanics and Foundation Engineering. Rotterdam, Netherlands: A.A. Balkema.
Skarzyńska, K. M., and P. Michalski. 1998. “Filtration through hydraulic embankments made of colliery spoil: Model tests.” Waste Manage. Res. 16 (3): 233–243. https://doi.org/10.1177/0734242X9801600305.
Skempton, A. W., and O. T. Jones. 1944. “Notes on the compressibility of clays.” Q. J. Geol. Soc. 100 (1–4): 119–135. https://doi.org/10.1144/GSL.JGS.1944.100.01-04.08.
Steiakakis, E., K. Kavouridis, and D. Monopolis. 2009. “Large scale failure of the external waste dump at the ‘south field’ lignite mine, Northern Greece.” Eng. Geol. 104 (3–4): 269–279. https://doi.org/10.1016/j.enggeo.2008.11.008.
Terzaghi, K., and R. B. Peck. 1967. Soil mechanics in engineering practice. New York: Wiley.
Terzaghi, K., R. B. Peck, and G. Mesri. 1996. Soil mechanics in engineering practice. 3rd ed. New York: Wiley.
Ulusay, R., F. Arikan, M. F. Yoleri, and D. Çaǧlan. 1995. “Engineering geological characterization of coal mine waste material and an evaluation in the context of back-analysis of spoil pile instabilities in a strip mine, SW Turkey.” Eng. Geol. 40 (1): 77–101. https://doi.org/10.1016/0013-7952(95)00042-9.
Ulusay, R., D. Çaglan, F. ArIkan, and M. F. Yoleri. 1996. “Characteristics of biplanar wedge spoil pile instabilities and methods to improve stability.” Can. Geotech. J. 33 (1): 58–79. https://doi.org/10.1139/t96-024.
USACE. 1990. “Engineer manual 1110-1-1904 settlement analysis.” In Engineering and design. Washington, DC: USACE.
Wolff, T. F. 1985. “Analysis and design of embankment dam slopes: A probabilistic approach." Ph.D. dissertation, Dept. of Civil Engineering, Purdue Univ.
Yucemen, M. S., W. H. Tang, and A.-S. Ang. 1973. “Structural research.” In A probabilistic study of safety and design of earth slopes. Urbana, IL: Univ. of Illinois.
Zevgolis, I. E. 2018. “Geotechnical characterization of mining rock waste dumps in central Evia, Greece.” Environ. Earth Sci. 77 (16): 566. https://doi.org/10.1007/s12665-018-7743-5.
Zevgolis, I. E., A. V. Deliveris, and N. C. Koukouzas. 2018a. “Probabilistic design optimization and simplified geotechnical risk analysis for large open pit excavations.” Comput. Geotech. 103: 153–164. https://doi.org/10.1016/j.compgeo.2018.07.024.
Zevgolis, I. E., N. C. Koukouzas, C. Roumpos, A. V. Deliveris, and A. M. Marshall. 2018b. “Evaluation of geotechnical property variability: The case of spoil material from surface lignite mines.” In Proc., 5th Int. Civil Protection Conf. - SafeKozani 2018. Kozani, Greece: SafeGreece.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Feb 21, 2020
Accepted: Mar 5, 2021
Published online: May 11, 2021
Published in print: Jul 1, 2021
Discussion open until: Oct 11, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Alexandros I. Theocharis, Ioannis E. Zevgolis, Christos Roumpos, Nikolaos C. Koukouzas, 3D Numerical Analysis for the Valorization Potential of Spoil Heaps by Shallow Foundations, Sustainability, 10.3390/su14127363, 14, 12, (7363), (2022).
- Ioannis E. Zevgolis, Alexandros I. Theocharis, Nikolaos C. Koukouzas, Geotechnical Engineering Perspectives: Challenges and Solutions in the Transition to a Post-Lignite Era, International Conference on Raw Materials and Circular Economy, 10.3390/materproc2021005017, (17), (2021).
- A. Mikroutsikos, A. I. Theocharis, N. C. Koukouzas, I. E. Zevgolis, Slope stability of deep surface coal mines in the presence of a weak zone, Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 10.1007/s40948-021-00265-2, 7, 3, (2021).