Long-Term Field Evaluation of a Geosynthetic-Stabilized Roadway Founded on Expansive Clays
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 146, Issue 4
Abstract
This paper presents an evaluation of the long-term field performance of Farm-to-Market Road 2, the construction of which involved geosynthetic stabilization to address concerns related to the presence of expansive clays and associated environmental loads. A comprehensive study was conducted to quantify the benefits of geosynthetic stabilization in the performance of the roadway after having been subjected to 9 years of wet and dry season cycles. Control sections and seven design schemes (including various combinations of geosynthetic-stabilized base and lime-stabilized subbase courses) were incorporated in 32 test sections. Evaluation of the development of environmental longitudinal cracks over the 9-year period showed that the use of geosynthetics to stabilize the roadway base led to a significantly improved performance, as quantified based on the extent and length of environmental load–induced longitudinal cracks. The improvement, observed for all the geosynthetics considered in this study, was found to be more significant during dry seasons, which is when environmental longitudinal cracks develop. In addition, results from the field performance monitoring program revealed that lime stabilization of the subbase not only did not help but generally compromised the performance of road sections subjected to environmental loads.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are thankful for the financial support received from the Texas Department of Transportation. The help with collection of field data provided by Dr. Julio Ferreira, Dr. Ranjiv Gupta, Dr. John McCartney, Mr. Rutuparna Joshi, and other team members from the University of Texas at Austin is also greatly appreciated.
References
Archer, S., and M. H. Wayne. 2012. “Relevancy of material properties in predicting the performance of geogrid-stabilized roadway.” In Proc., Geo-Congress 2012, 1320–1329. Reston, VA: ASCE.
Chen, D. H. 2007. “Field and lab investigations of prematurely cracking pavements.” J. Perform. Constr. Facil. 21 (4): 293–301. https://doi.org/10.1061/(ASCE)0887-3828(2007)21:4(293).
Chen, Q., and M. Abu-Farsakh. 2012. “Structural contribution of geogrid reinforcement in pavement.” In Proc., Geo-Congress 2012, 1468–1475. Reston, VA: ASCE.
Christopher, B. R., E. Cuelho, and S. W. Perkins. 2008. “Development of geogrid junction strength requirement for reinforced roadway base design.” In Proc., GeoAmericas 2008 Conf., 1003–1012. St. Paul, MN: Industrial Fabrics Association International.
Cuelho, E., and S. W. Perkins. 2005. “Resilient interface shear modulus from short strip cyclic pullout tests.” In Proc., Geofrontiers 2005. Reston, VA: ASCE.
Cuelho, E., and S. W. Perkins. 2009. Field investigation of geosynthetics used for subgrade stabilization. Washington, DC: FHWA.
Dessouky, S., J. H. Oh, M. Yang, M. Ilias, S. I. Lee, T. Freeman, M. Bourland, and M. Jao. 2012. Pavement repair strategies for selected distresses in FM roadways. Austin, TX: Texas DOT.
FHWA. 2003. Distress identification manual for the long-term pavement performance program (LTPP). Washington, DC: FHWA.
Jones, D. E., and W. G. Holtz. 1973. “Expansive soils-the hidden disaster.” Civ. Eng. 43 (8): 49–51.
Jones, D. E., and K. Jones. 1987. “Treating expansive soils.” Civ. Eng. 57 (8): 62–65.
Mahmood, T., K. Hatami, R. Ghabchi, and M. M. Zaman. 2012. “Pullout performance of geogrids with different junction strength.” In Proc., Geo-Congress 2012, 1360–1370. Reston, VA: ASCE.
Nielsen-Gammon, J. W. 2011. “The 2011 Texas drought: A briefing packet for the Texas legislature.” In The office of the state climatologist (OSC). College Station, TX: Texas A&M Univ.
Perkins, S. W. 1999. “Mechanical response of geosynthetic-reinforced flexible pavements.” Geosynth. Int. 6 (5): 347–382. https://doi.org/10.1680/gein.6.0157.
Perkins, S. W., B. R. Christopher, E. Cuelho, G. R. Eiksund, I. Hoff, C. W. Schwartz, G. Svano, and A. Watn. 2004. Development of design methods for geosynthetic reinforced flexile pavements. Washington, DC: FHWA.
Perkins, S. W., B. R. Christopher, N. Thom, G. Montestruque, L. Korkiala-Tanttu, and A. Watn. 2010. “Geosynthetics in pavement reinforcement applications.” In Proc., 9th Int. Conf. on Geosynthetics, 165–192. Jupiter, FL: International Geosynthetics Society.
Roodi, G. H. 2016. “Analytical, experimental, and field evaluations of soil-geosynthetic interaction under small displacements.” Ph.D. dissertation, Dept. of Civil, Architectural, and Environmental Engineering, Univ. of Texas.
Roodi, G. H., J. R. Phillips, and J. G. Zornberg. 2016. “Evaluation of vertical deflections in geosynthetic reinforced pavements constructed on expansive subgrades.” In Proc., 3rd Pan-American Conf. on Geosynthetics, 1970–1987. St. Paul, MN: Industrial Fabrics Association International.
Roodi, G. H., and J. G. Zornberg. 2017. “Stiffness of soil-geosynthetic composite under small displacements: II. Experimental evaluation.” J. Geotech. Geoenviron. Eng. 143 (10): 04017076. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001769.
Roodi, G. H., J. G. Zornberg, M. M. Aboelwafa, J. R. Phillips, L. Zheng, and J. Martinez. 2018. Soil-geosynthetic interaction test to develop specifications for geosynthetic-stabilized roadways. Austin, TX: Texas DOT.
Sprague, C., S. Lothspeich, F. Chuck, and R. Goodman. 2004. “Geogrid reinforcement of road base aggregate-measuring the confinement benefit.” In Proc., Geotechnical Engineering for Transportation Projects, 996–1005. Reston, VA: ASCE.
TxDOT. 2010a. Biaxial geogrid for environmental cracking. Austin, TX: Texas DOT.
TxDOT. 2010b. Geogrid for base/embankment reinforcement. Austin, TX: Texas DOT.
TxDOT. 2014. Test procedure for determining potential vertical rise. Austin, TX: Texas DOT.
TxDOT. 2015. Pavement management information system–Rater’s manual. Austin, TX: Texas DOT.
USACE. 1983. Foundation in expansive soils. Washington, DC: US Army Corps of Engineers.
Zornberg, J. G. 2017a. “Functions and applications of geosynthetics in roadways: Part 1.” Procedia Eng. 189 (Jan): 298–306. https://doi.org/10.1016/j.proeng.2017.05.048.
Zornberg, J. G. 2017b. “Functions and applications of geosynthetics in roadways: Part 2.” In Geosynthetics, 34–40. Roseville, MN: Industrial Fabrics Association International.
Zornberg, J. G., C. P. Armstrong, and A. Potkay. 2017a. Implementation of centrifuge testing of expansive soils for pavement design. Austin, TX: Texas DOT.
Zornberg, J. G., J. A. Z. Ferreira, R. Gupta, R. V. Joshi, and G. H. Roodi. 2012. Geosynthetic-reinforced unbound base courses: Quantification of the reinforcement benefits. Austin, TX: Texas DOT.
Zornberg, J. G., J. A. Prozzi, R. Gupta, R. Luo, J. S. McCartney, J. A. Z. Ferreira, and C. Nogueira. 2008. Validating mechanisms in geosynthetic reinforced pavements. Austin, TX: Texas DOT.
Zornberg, J. G., G. H. Roodi, and R. Gupta. 2017b. “Stiffness of soil-geosynthetic composite under small displacements. I: Model development.” J. Geotech. Geoenviron. Eng. 143 (10): 04017075. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001768.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Feb 1, 2019
Accepted: Oct 9, 2019
Published online: Jan 28, 2020
Published in print: Apr 1, 2020
Discussion open until: Jun 28, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.