Numerical Modeling of Zoned Rockfill Dam during Construction Considering Granular Interface Behavior
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 145, Issue 3
Abstract
The behavior of interfaces between granular materials in zoned embankment dams can influence their overall behavior. Soil–structure interfaces have been largely studied, but only a few analyses of interfaces between the granular materials composing rockfill dams have been realized. Consequently, there is a need to consider the influence of material interfaces within dams. Numerical modeling of a rockfill dam was performed to simulate its mechanical behavior during the construction phase. The behavior was analyzed based on the numerical methods used to model the interfaces and on interface characteristics through sensitivity analyses. Particular attention was paid to the influence of interface shear strength on the dam shear deformations, settlements, and plasticity. The numerical results highlight that the contact condition and the interface characteristics influence the dam behavior. Low shear resistance of interface engenders an increase of relative displacements, settlements, and shear strains in the dam. Moreover, the dilative behavior of the interfaces also affects the overall dam behavior.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for financial support from Hydro-Québec through the Industrial Research Chair CRSNG/Hydro-Québec on life cycle optimization of embankment dams.
References
Alonso, E., M. Zandarin, and S. Olivella. 2013. “Joints in unsaturated rocks: Thermo-hydro-mechanical formulation and constitutive behaviour.” J. Rock Mech. Geotech. Eng. 5 (3): 200–213. https://doi.org/10.1016/j.jrmge.2013.05.004.
Barton, N. 1973. “Review of a new shear-strength criterion for rock joints.” Eng. Geol. 7 (4): 287–332. https://doi.org/10.1016/0013-7952(73)90013-6.
Bolton, M. D. 1986. “The strength and dilatancy of sands.” Géotechnique 36 (1): 65–78. https://doi.org/10.1680/geot.1986.36.1.65.
Cathie, D. N., and R. Dungar. 1978. “Evaluation of finite element predictions for constructional behaviour of a rockfill dam.” Proc. Inst. Civil Eng. 65 (3): 551–568. https://doi.org/10.1680/iicep.1978.2805.
Cerfontaine, B., A. C. Dieudonné, J. P. Radu, F. Collin, and R. Charlier. 2015. “3D zero-thickness coupled interface finite element: Formulation and application.” Comput. Geotech. 69: 124–140. https://doi.org/10.1016/j.compgeo.2015.04.016.
Cescotto, S., and R. Charlier. 1993. “Frictional contact finite elements based on mixed variational principles.” Int. J. Numer. Meth. Eng. 36 (10): 1681–1701. https://doi.org/10.1002/nme.1620361005.
Clough, R. W., and R. J. Woodward. 1967. “Analysis of embankment stresses and deformations.” J. Soil Mech. Found. Div. 93 (4): 529–549.
Day, R. A., and D. M. Potts. 1994. “Zero thickness interface elements—Numerical stability and application.” Int. J. Numer. Anal. Meth. Geomech. 18 (10): 689–708. https://doi.org/10.1002/nag.1610181003.
Fairhurst, C. 1993. Vol. 2 of Analysis and design methods: Comprehensive rock engineering: Principles, practice and projects. New York: Pergamon.
Gens, A., I. Carol, and E. E. Alonso. 1990. “A constitutive model for rock joints formulation and numerical implementations.” Comput. Geotech. 9 (1–2): 3–20. https://doi.org/10.1016/0266-352X(90)90026-R.
Goodman, R. E., R. L. Taylor, and T. L. Brekke. 1968. “A model for the mechanics of jointed rock.” J. Soil Mech. Found. Div. 94 (3): 637–660.
Hu, L., B. Zhang, and J. Ma. 2010. “Mechanical characteristics for interfaces between granular materials.” Mech. Res. Commun. 37 (1): 42–46. https://doi.org/10.1016/j.mechrescom.2009.10.005.
Hydro-Québec. 2010. Settlement of the SM-3 rockfill dam, 43. QC, Canada: Board Experts.
Khalid, S., B. Singh, G. Nayak, and O. Jain. 1990. “Nonlinear analysis of concrete face rockfill dam.” J. Geotech. Eng. 116 (5): 822–837. https://doi.org/10.1061/(ASCE)0733-9410(1990)116:5(822).
Patton, F. D. 1966. “Multiple modes of shear failure in rock.” In Proc., 1er Congrès de la Société Internationale de Mécanique des Roches, 509–513. Lisbonne, Portugal: International Society for Rock Mechanics and Rock Engineering.
Sharma, K. G., and C. S. Desai. 1992. “Analysis and implementation of thin-layer element for interfaces and joints.” J. Eng. Mech. 118 (12): 2442–2462. https://doi.org/10.1061/(ASCE)0733-9399(1992)118:12(2442).
Tanchev, L. 2014. Dams and appurtenant hydraulic structures. 2nd ed. Boca Raton, FL: CRC Press.
Touileb, B. N., S. Bonelli, P. Anthiniac, A. Carrère, O. Débordes, G. La Barbera, A. Bani, and G. Mazzà. 2000. “Settlement by wetting of the upstream rockfills of large dams.” In Proc., 53rd Canadian Geotechnical Conf., 263–270. Richmond, BC, Canada: Canadian Geotechnical Society.
Xu, B., D. Zou, and H. Liu. 2012. “Three-dimensional simulation of the construction process of the Zipingpu concrete face rockfill dam based on a generalized plasticity model.” Comput. Geotech. 43: 143–154. https://doi.org/10.1016/j.compgeo.2012.03.002.
Zhang, B., Y. Yu, J. Fu, and L. Hu. 2008. “Simple shear test for interfaces between core and filter soils in rock-fill dams.” Geotech. Test. J. 31 (3): 252–260. https://doi.org/10.1520/GTJ100859.
Zhang, G., and J.-M. Zhang. 2009. “Numerical modeling of soil-structure interface of a concrete-faced rockfill dam.” Comput. Geotech. 36 (5): 762–772. https://doi.org/10.1016/j.compgeo.2009.01.002.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Nov 10, 2017
Accepted: Jul 19, 2018
Published online: Dec 24, 2018
Published in print: Mar 1, 2019
Discussion open until: May 24, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.