Spudcan Penetration Analysis for Case Histories in Clay
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 140, Issue 7
Abstract
This paper reports advances in the prediction of spudcan resistance profiles during installation and preloading, based on the soil flow mechanisms observed in model tests and numerical analysis, and taking into account strain softening and rate dependency on the soil strength. Deep penetration of spudcan foundations was simulated for 14 case histories reported from different locations in the Gulf of Mexico, where the soils were single layer, predominantly normally to lightly overconsolidated clay. Axisymmetric and three-dimensional analyses were carried out using two large deformation finite-element (LDFE) approaches, modifying the simple elastic-perfectly plastic Tresca soil model to allow strain softening and strain-rate dependency of the shear strength. The field data were compared with the results of the finite-element analyses and with predictions using various design approaches. Excellent agreement was found, particularly when a mechanism-based design approach was used that differentiated between conditions before and after backflow of soil above the penetrating spudcan.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research presented herein was undertaken in collaboration with Fugro-McClelland Marine Geosciences, Inc., Houston, Texas. The first author is an ARC Postdoctoral Fellow (APDI) and is supported by the ARC Linkage Project LP110100174. This work forms part of the activities of the Centre for Offshore Foundation Systems (COFS), currently supported as a node of the Australian Research Council Centre of Excellence for Geotechnical Science and Engineering and as a Centre of Excellence by the Lloyd’s Register Foundation. This support is gratefully acknowledged.
References
ABAQUS/Explicit 6.10 [Computer software]. Providence, RI, Dassault Systèmes.
AFENA [Computer software]. Sydney, NSW, Australia, Centre for Geotechnical Research, Univ. of Sydney.
Bennett & Associates. (2005). “Jack up units: A technical primer for the offshore industry professional.” 〈http://www.bennettoffshore.com/primer.html〉.
Club des Actions de Recherche sur les Ouvrages en Mer (CLAROM). (1993). Design guides for offshore structures, P. Le Tirant and C. Pérol, eds., Paris.
Einav, I., and Randolph, M. F. (2005). “Combining upper bound and strain path methods for evaluating penetration resistance.” Int. J. Numer. Methods Eng., 63(14), 1991–2016.
Erbrich, C. T. (2005). “Australian frontiers—Spudcans on the edge.” Proc., 1st Int. Symp. on Frontiers in Offshore Geotechnics (ISFOG), Taylor & Francis, London, 49–74.
Finnie, I. M., and Randolph, M. F. (1994). “Bearing response of shallow foundations in uncemented calcareous soil.” Proc., Int. Conf. Centrifuge ’94, Balkema, Rotterdam, Netherlands, 535–540.
Ghosh, S. (1991). “An arbitrary Lagrangian-Eulerian finite element method for large deformation analysis of elastic-viscoplastic solids.” Comput. Methods Appl. Mech. Eng., 86(2), 127–188.
Herrmann, L. R. (1978). “Finite element analysis of contact problems.” J. Engrg. Mech. Div., 104(No. EM5), 1043–1057.
Hossain, M. S., Hu, Y., Randolph, M. F., and White, D. J. (2005). “Limiting cavity depth for spudcan foundations penetrating clay.” Geotechnique, 55(9), 679–690.
Hossain, M. S., and Randolph, M. F. (2009a). “Effect of strain rate and strain softening on the penetration resistance of spudcan foundations on clay.” Int. J. Geomech., 122–132.
Hossain, M. S., and Randolph, M. F. (2009b). “New mechanism-based design approach for spudcan foundations on single layer clay.” J. Geotech. Geoenviron. Eng., 1264–1274.
Hossain, M. S., Randolph, M. F., Hu, Y., and White, D. J. (2006). “Cavity stability and bearing capacity of spudcan foundations on clay.” Proc., Offshore Technology Conf., Offshore Technology Conference, Houston.
Houlsby, G. T., and Martin, C. M. (2003). “Undrained bearing capacity factors for conical footings on clay.” Geotechnique, 53(5), 513–520.
Hu, Y., and Randolph, M. F. (1998a). “A practical numerical approach for large deformation problems in soil.” Int. J. Numer. Anal. Methods Geomech., 22(5), 327–350.
Hu, Y., and Randolph, M. F. (1998b). “H-adaptive FE analysis of elasto-plastic non-homogeneous soil with large deformation.” Comput. Geotech., 23(1–2), 61–83.
InSafeJIP. (2010). Improved guidelines for the prediction of geotechnical performance of spudcan foundations during installation and removal of jack-up units, RPS Energy, Abingdon, Oxfordshire, U.K.
ISO (2011). “Petroleum and natural gas industries – Site specific assessment of mobile offshore units – Part 1: Jack-ups.” ISO 19905-1, Geneva.
Lacasse, M., Nadim, F., Rahim, A., and Guttormsen, T. R. (2007). “Statistical description of characteristic soil properties.” Proc., Offshore Technology Conf., Offshore Technology Conference, Houston.
Low, H. E., Randolph, M. F., DeJong, J. T., and Yafrate, N. J. (2008). “Variable rate full-flow penetration tests in intact and remoulded soil.” Proc., 3rd Int. Conf. on Geotechnical and Geophysical Site Characterization, Taylor & Francis, London, 1087–1092.
Lunne, T., Berre, T., Andersen, K. H., Strandvik, S., and Sjursen, M. (2006). “Effects of sample disturbance and consolidation procedures on measured shear strength of soft marine Norwegian clays.” Can. Geotech. J., 43(7), 726–750.
Menzies, D., and Roper, R. (2008). “Comparison of jackup rig spudcan penetration methods in clay.” Proc., Offshore Technology Conf., Offshore Technology Conference, Houston.
Osborne, J. J. (2007). Unpredicted jack-up foundation performance, PetroMin, Singapore, 42–51.
Randolph, M. F. (2004). “Characterisation of soft sediments for offshore applications. Keynote lecture.” Proc., 2nd Int. Conf. Site Characterisation, Millpress, Rotterdam, Netherlands, 209–231.
Randolph, M. F., Cassidy, M. J., Gourvenec, S., and Erbrich, C. J. (2005). “Challenges of offshore geotechnical engineering. State of the Art paper.” Proc., Int. Conf. on Soil Mech. and Found. Eng., Int. Society for Soil Mechanics and Geotechnical Engineering, London, 123–176.
Skempton, A. W. (1951). “The bearing capacity of clays.” Building Research Congress, London, 1, 180–189.
Young, A. G., Remmes, B. D., and Meyer, B. J. (1984). “Foundation performance of offshore jack-up drilling rigs.” J. Geotech. Engrg., 841–859.
Zheng, J., Hossain, M. S., and Wang, D. (2012). “3D large deformation FE analysis of circular footing and spudcan on clay using CEL approach.” Proc., 2nd Int. Symp. on Constitutive Modelling of Geomaterials, Springer, Berlin, 803–810.
Zheng, J., Hossain, M. S., and Wang, D. (2013). “3D large deformation FE analysis of spudcan and cone penetration on three-layer clays.” Proc., 23rd Int. Offshore and Polar Engineering Conf., Int. Society of Offshore and Polar Engineers, Cupertino, CA, 453–460.
Zhou, H., and Randolph, M. F. (2007). “Computational techniques and shear band development for cylindrical and spherical penetrometers in strain-softening clay.” Int. J. Geomech., 287–295.
Zhou, H., and Randolph, M. F. (2009). “Resistance of full-flow penetrometers in rate-dependent and strain-softening clay.” Géotechnique, 59(2), 79–86.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jun 28, 2013
Accepted: Mar 15, 2014
Published online: Apr 14, 2014
Published in print: Jul 1, 2014
Discussion open until: Sep 14, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.