Reliability-Based Design for External Stability of Narrow Mechanically Stabilized Earth Walls: Calibration from Centrifuge Tests
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 137, Issue 3
Abstract
A narrow mechanically stabilized earth (MSE) wall is defined as a MSE wall placed adjacent to an existing stable wall, with a width less than that established in current guidelines. Because of space constraints and interactions with the existing stable wall, various studies have suggested that the mechanics of narrow walls differ from those of conventional walls. This paper presents the reliability-based design (RBD) for external stability (i.e., sliding and overturning) of narrow MSE walls with wall aspects ranging from 0.2 to 0.7. The reduction in earth pressure pertaining to narrow walls is considered by multiplying a reduction factor by the conventional earth pressure. The probability distribution of the reduction factor is calibrated based on Bayesian analysis by using the results of a series of centrifuge tests on narrow walls. The stability against bearing capacity failure and the effect of water pressure within MSE walls are not calibrated in this study because they are not modeled in the centrifuge tests. An RBD method considering variability in soil parameters, wall dimensions, and traffic loads is applied to establish the relationship between target failure probability and the required safety factor. A design example is provided to illustrate the design procedure.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2002). “Standard specifications for highway bridges.” HB-17, 7th Ed., Washington, DC.
ASTM. (2009). “Standard test method for tensile properties of geotextiles by the wide-width strip method.” D4595-09, West Conshohocken, PA.
Baecher, G. H. (1987). “Geotechnical risk analysis user’s guide.” Rep. No. FHwA-RD-87-011, Federal Highway Administration, Washington, DC.
Chalermyanont, T., and Benson, C. H. (2004). “Reliability-based design for internal stability of mechanically stabilized earth walls.” J. Geotech. Geoenviron. Eng., 130(2), 163–173.
Chalermyanont, T., and Benson, C. H. (2005). “Reliability-based design for external stability of mechanically stabilized earth walls.” Int. J. Geomech., 5(3), 196–205.
Ching, J. (2009). “Equivalence between reliability and factor of safety.” Probabilistic Eng. Mechanics, 24(2), 159–171.
Elias, V., Christopher, B. R., and Berg, R. R. (2001). “Mechanically stabilized earth walls and reinforced soil slopes design and construction guidelines” Rep. No. FHwA-NHI-00-043, National Highway Institute, Federal Highway Administration, Washington, DC.
Fenton, G. A., Griffiths, D. V., and Williams, M. B. (2005). “Reliability of traditional retaining wall design.” Geotechnique, 55(1), 55–62.
Filz, G. M., and Duncan, J. M. (1997a). “Vertical shear loads on nonmoving walls. I: Theory.” J. Geotech. Geoenviron. Eng., 123(9), 856–862.
Filz, G. M., and Duncan, J. M. (1997b). “Vertical shear loads on nonmoving walls. II: Application.” J. Geotech. Geoenviron. Eng., 123(9), 863–873.
Frydman, S., and Keissar, I. (1987). “Earth pressure on retaining walls near rock faces.” J. Geotech. Eng., 113(6), 586–599.
Handy, R. L. (1985). “The arc in soil arching.” J. Geotech. Eng., 111(3), 302–318.
Kniss, K. T., Yang, K.-H., Wright, S. G., and Zornberg, J. G. (2007). “Earth pressures and design consideration of narrow MSE wall.” Proc. Texas Section ASCE Spring 2007, ASCE, Reston, VA.
Lawson, C. R., and Yee, T. W. (2005). “Reinforced soil retaining walls with constrained reinforced fill zones.” Proc., GeoFrontiers 2005, ASCE, Reston, VA, 2721–2734.
Leshchinsky, D., Hu, Y., and Han, J. (2004). “Limited reinforced space in segmental retaining wall,” Geotext. Geomembr., 22(6), 543–553.
Metropolis, N., Rosenbluth, A. E., Rosenbluth, M. N., Teller, A. H., and Teller, E. (1953). “Equation of state calculations by fast computing machines.” J. Chem. Phys., 21, 1087–1092.
Morrison, K. F., Harrison, F. E., Collin, J. G., Dodds, A., and Arndt, B. (2006). “Shored mechanically stabilized earth (SMSE) wall systems design guidelines.” Rep. No.FHwA-CFL/TD-06-001, Federal Highway Administration, Central Federal Lands Highway Division, Washington, DC.
Phoon, K. (1995). “Reliability-based design of foundations for transmission line structures.” Ph.D. dissertation, Cornell Univ., Cornell, NY.
Take, W., and Valsangkar, A. (2001). “Earth pressures on unyielding retaining walls of narrow backfill width.”Can. Geotech. J., 38(6), 1220–1230.
Woodruff, R. (2003). “Centrifuge modeling of MSE-shoring composite walls.” Master thesis, Univ. of Colorado, Boulder, CO.
Yang, K.-H., Kniss, K. K., Zornberg, J. G., and Wright, S. G. (2008). “Finite-element analyses for centrifuge modeling of narrow MSE walls.” Proc., First Pan American Geosynthetics Conference, GEOAMERICAS-2008 (CD-ROM), International Fabrics Association Int., Rosevile, MN, 1246–1255.
Yang, K.-H., and Liu, C.-N. (2007). “Finite-element analysis of earth pressures for narrow retaining walls.” J. GeoEng., 2(2), 43–52.
Zornberg, J. G. (2002). “Peak versus residual shear strength in geosynthetic-reinforced soil design.” Geosyn. Int., 9(4), 301–318.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 137 • Issue 3 • March 2011
Pages: 239 - 253
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Aug 12, 2008
Accepted: Aug 4, 2010
Published online: Aug 10, 2010
Published in print: Mar 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.