Lower-Bound Seismic Bearing Capacity of a Strip Footing Adjacent to an Existing Footing on Sand
Publication: International Journal of Geomechanics
Volume 21, Issue 8
Abstract
The ideal notion of footings placed in isolation is rarely implemented in practice and footings are often placed adjacent to each other, interfering with one another's performance. In this paper, the lower-bound finite-element limit analysis method is used to investigate the pseudostatic bearing capacity of a strip footing placed in close proximity to an already-existing strip footing, over cohesionless soil. The pseudostatic approach is used to model the seismic loading. Analyses conducted for different accelerations, soil friction angles, and service load magnitudes on the existing footing and spacings showed that while the presence of the existing footing can improve the pseudostatic bearing capacity of the new footing, an amplified rate of reduction with seismicity ultimately causes the new footing to withstand smaller accelerations compared with its isolated case. The increase in spacing generally reduced bearing capacity. An exception was observed for a friction angle of 40° for all service loads and pseudostatic accelerations, where a maximum in both bearing capacity and fluidization acceleration was observed around 0.1 of the footing widths.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Notation
The following symbols are used in this paper:
- B
- width of footing;
- Df
- depth of placement of the new footing to the surface;
- Ed
- number of elements along each vertical interface of embedment;
- Ef
- number of elements under the footing;
- h
- depth of domain;
- kh
- pseudostatic horizontal coefficient;
- kh,lim
- cutoff acceleration;
- kv
- pseudostatic vertical coefficient;
- L
- distance from edge of each footing to boundary of domain;
- m
- service load fraction with respect to Qu,iso;
- NcE
- seismic cohesion bearing capacity factor for new footing in presence of existing footing;
- NcE,iso
- seismic cohesion bearing capacity factor for an isolated footing;
- Nd
- number of nodes along each vertical interface of embedment;
- Nf
- number of nodes under the footing;
- NqE
- seismic surcharge bearing capacity factor for new footing in presence of existing footing;
- NqE,iso
- seismic surcharge bearing capacity factor for an isolated footing;
- Nγ,iso
- static bearing capacity factor of the isolated footing;
- NγE
- seismic unit weight bearing capacity factor for new footing in presence of existing footing;
- NγE,iso
- seismic unit weight bearing capacity factor for an isolated footing;
- NγqE
- seismic bearing capacity factor for new embedded footing on cohesionless soil in presence of existing footing;
- Qu,iso
- ultimate failure load for a single isolated footing;
- QuE
- ultimate pseudostatic failure load for new footing in presence of existing footing;
- QuE,iso
- ultimate pseudostatic limit load of an isolated footing;
- S
- spacing between footings;
- Scr
- spacing at which maximum bearing capacity is achieved;
- γ
- soil unit weight;
- ξcE
- efficiency factor for contribution of cohesion;
- ξqE
- efficiency factor for contribution of surcharge;
- ξγE
- efficiency factor for contribution of unit weight;
- ξγqE
- efficiency factor for an embedded footing on cohesionless soil;
- σn
- normal stress on an arbitrary plane;
- σx
- nodal normal stress along the y axis;
- σy
- nodal normal stress along the x axis;
- τ
- shear stress on an arbitrary plane;
- τxy
- nodal shear stress; and
- φ
- soil internal friction angle.
References
Alimardani Lavasan, A., and M. Ghazavi. 2012. “Failure mechanism and soil deformation pattern of soil beneath interfering square footings.” Int. J. Numer. Methods Civ. Eng. 1 (2): 48–56.
Alimardani Lavasan, A., M. Ghazavi, A. von Blumenthal, and T. Schanz. 2018. “Bearing capacity of interfering strip footings.” J. Geotech. Geoenviron. Eng. 144 (3): 04018003. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001824.
Alimardani Lavasan, A., P. Gussmann, and T. Schanz. 2015. “Assessment of bearing capacity and failure mechanism of interfering strip footings.” In Proc., 16th ECSMGE Geotechnical Engineering for Infrastructure and Development, 893–900. London: ICE Publishing.
Biswas, N., and P. Ghosh. 2018. “Interaction of adjacent strip footings on reinforced soil using upper-bound limit analysis.” Geosynth. Int. 25 (6): 599–611. https://doi.org/10.1680/jgein.18.00020.
Cascone, E., and O. Casablanca. 2016. “Static and seismic bearing capacity of shallow strip footings.” Soil Dyn. Earthquake Eng. 84: 204–223. https://doi.org/10.1016/j.soildyn.2016.02.010.
Chakraborty, D., and J. Kumar. 2015. “Seismic bearing capacity of shallow embedded foundations on a sloping ground surface.” Int. J. Geomech. 15 (1): 04014035. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000403.
Chakraborty, D., and Y. Mahesh. 2016. “Seismic bearing capacity factors for strip footings on an embankment by using lower-bound limit analysis.” Int. J. Geomech. 16 (3): 06015008. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000553.
Das, B. M., and S. Larbi-Cherif. 1983. “Bearing capacity of two closely-spaced shallow foundations on sand.” Soils Found. 23 (1): 1–7. https://doi.org/10.3208/sandf1972.23.1.
Fuentes, W., J. Duque, C. Lascarro, and M. Gil. 2019. “Study of the bearing capacity of closely spaced square foundations on granular soils.” Geotech. Geol. Eng. 37 (3): 1401–1410. https://doi.org/10.1007/s10706-018-0694-5.
Ghazavi, M., and A. Alimardani Lavasan. 2008. “Interference effect of shallow foundations constructed on sand reinforced with geosynthetics.” Geotext. Geomembr. 26 (5): 404–415. https://doi.org/10.1016/j.geotexmem.2008.02.003.
Ghosh, P. 2011. “Seismic interference effect of two nearby square footings.” In Geo-Frontiers 2011: Advances in Geotechnical Engineering, Geotechnical Special Publication 211, edited by J. Han, and D. E. Alzamora, 352–361. Reston, VA: ASCE.
Ghosh, P. 2012. “FLAC based numerical studies on dynamic interference of two nearby embedded machine foundations.” Geotech. Geol. Eng. 30 (5): 1161–1181. https://doi.org/10.1007/s10706-012-9530-5.
Ghosh, P., and A. Sharma. 2010. “Interference effect of two nearby strip footings on layered soil: Theory of elasticity approach.” Acta Geotech. 5 (3): 189–198. https://doi.org/10.1007/s11440-010-0123-2.
Graham, J., G. P. Raymond, and A. Suppiah. 1984. “Bearing capacity of three closely-spaced footings on sand.” Géotechnique 34 (2): 173–181. https://doi.org/10.1680/geot.1984.34.2.173.
Hjiaj, M., A. V. Lyamin, and S. W. Sloan. 2005. “Numerical limit analysis solutions for the bearing capacity factor Nγ.” Int. J. Solids Struct. 42 (5–6): 1681–1704. https://doi.org/10.1016/j.ijsolstr.2004.08.002.
Kouzer, K. M., and J. Kumar. 2010. “Ultimate bearing capacity of a footing considering the interference of an existing footing on sand.” Geotech. Geol. Eng. 28 (4): 457–470. https://doi.org/10.1007/s10706-010-9305-9.
Kumar, A., and S. Saran. 2003. “Closely spaced footings on geogrid-reinforced sand.” J. Geotech. Geoenviron. Eng. 129 (7): 660–664. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:7(660).
Kumar, J., and P. Bhattacharya. 2010. “Bearing capacity of interfering multiple strip footings by using lower bound finite elements limit analysis.” Comput. Geotech. 37 (5): 731–736. https://doi.org/10.1016/j.compgeo.2010.05.002.
Kumar, J., and P. Bhattacharya. 2011. “Bearing capacity of two interfering strip footings from lower bound finite elements limit analysis.” Int. J. Numer. Anal. Methods Geomech. 37 (5): 441–452. https://doi.org/10.1002/nag.1104.
Kumar, J., and M. K. Bhoi. 2008. “Interference of multiple strip footings on sand using small scale model tests.” Geotech. Geol. Eng. 26 (4): 469–477. https://doi.org/10.1007/s10706-008-9175-6.
Kumar, J., and M. K. Bhoi. 2009. “Interference of two closely spaced strip footings on sand using model tests.” J. Geotech. Geoenviron. Eng. 135 (4): 595–604. https://doi.org/10.1061/(ASCE)1090-0241(2009)135:4(595).
Kumar, J., and P. Ghosh. 2007. “Ultimate bearing capacity of two interfering rough strip footings.” Int. J. Geomech. 7 (1): 53–62. https://doi.org/10.1061/(ASCE)1532-3641(2007)7:1(53).
Kumar, J., and V. N. Khatri. 2008. “Effect of footing roughness on lower bound Nγ values.” Int. J. Geomech. 8 (3): 176–187. https://doi.org/10.1061/(ASCE)1532-3641(2008)8:3(176).
Kumar, J., and K. M. Kouzer. 2008. “Bearing capacity of two interfering footings.” Int. J. Numer. Anal. Methods Geomech. 32 (3): 251–264. https://doi.org/10.1002/nag.625.
Lee, J., and J. Eun. 2009. “Estimation of bearing capacity for multiple footings in sand.” Comput. Geotech. 36 (6): 1000–1008. https://doi.org/10.1016/j.compgeo.2009.03.009.
Mabrouki, A., D. Benmeddour, R. Frank, and M. Mellas. 2010. “Numerical study of the bearing capacity for two interfering strip footings on sands.” Comput. Geotech. 37 (4): 431–439. https://doi.org/10.1016/j.compgeo.2009.12.007.
Mohafezatkar Sereshkeh, A. M., and R. Jamshidi Chenari. 2017. “Induced settlement reduction of adjacent masonry building in residential constructions.” Civ. Eng. J. 3 (7): 450–462. https://doi.org/10.28991/cej-2017-00000104.
Naderi, E., and N. Hataf. 2014. “Model testing and numerical investigation of interference effect of closely spaced ring and circular footings on reinforced sand.” Geotext. Geomembr. 42 (3): 191–200. https://doi.org/10.1016/j.geotexmem.2013.12.010.
Nainegali, L. S., P. K. Basudhar, and P. Ghosh. 2013. “Interference of two asymmetric closely spaced strip footings resting on nonhomogeneous and linearly elastic soil bed.” Int. J. Geomech. 13 (6): 840–851. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000290.
Nainegali, L. S., P. K. Basudhar, and P. Ghosh. 2019. “Interference of proposed footing with an existing footing resting on nonlinearly elastic dense and loose cohesionless soil bed.” Eur. J. Environ. Civ. Eng. 1–18. https://doi.org/10.1080/19648189.2019.1638311.
Richards, R., Jr., D. G. Elms, and M. Budhu. 1993. “Seismic bearing capacity and settlements of foundations.” J. Geotech. Eng. 119 (4): 662–674. https://doi.org/10.1061/(ASCE)0733-9410(1993)119:4(662).
Salamatpoor, S., Y. Jafarian, and A. Hajiannia. 2019. “Bearing capacity and uneven settlement of consecutively constructed adjacent footings rested on saturated sand using model tests.” Int. J. Civ. Eng. 17 (6): 737–749. https://doi.org/10.1007/s40999-018-0295-y.
Schmüdderich, C., A. A. Lavasan, F. Tschuchnigg, and T. Wichtmann. 2020. “Bearing capacity of a strip footing placed next to an existing footing on frictional soil.” Soils Found. 60 (1): 229–238. https://doi.org/10.1016/j.sandf.2020.03.002.
Selvadurai, A. P. S., and S. A. A. Rabbaa. 1983. “Some experimental studies concerning the contact stresses beneath interfering rigid strip foundations resting on a granular stratum.” Can. Geotech. J. 20 (3): 406–415. https://doi.org/10.1139/t83-050.
Shokoohi, M., M. Veiskarami, and N. Hataf. 2019. “A numerical and analytical study on the bearing capacity of two neighboring shallow strip foundations on sand.” Iran. J. Sci. Technol. Trans. Civ. Eng. 43 (S1): 591–602. https://doi.org/10.1007/s40996-018-0189-x.
Sloan, S. W. 1988. “Lower bound limit analysis using finite elements and linear programming.” Int. J. Numer. Anal. Methods Geomech. 12 (1): 61–77. https://doi.org/10.1002/nag.1610120105.
Stuart, J. G. 1962. “Interference between foundations, with special reference to surface footings in sand.” Géotechnique 12 (1): 15–22. https://doi.org/10.1680/geot.1962.12.1.15.
Ukritchon, B., A. J. Whittle, and C. Klangvijit. 2003. “Calculations of bearing capacity factor Nγ using numerical limit analyses.” J. Geotech. Geoenviron. Eng. 129 (5): 468–474. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:6(468).
Veiskarami, M., R. Jamshidi Chenari, and A. A. Jameei. 2017. “Bearing capacity of strip footings on anisotropic soils by the finite elements and linear programming.” Int. J. Geomech. 17 (12): 04017119. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001018.
Wang, Y., R. K. N. D. Rajapakse, and A. H. Shah. 1991. “Dynamic interaction between flexible strip foundations.” Earthquake Eng. Struct. Dyn. 20 (5): 441–454. https://doi.org/10.1002/eqe.4290200505.
West, J. M., and J. G. Stuart. 1965. “Oblique loading resulting from interference between surface footings on sand.” In Vol. 2 of Proc., 6th Int. Conf. Soil Mechanics and Foundation Engineering, 214–217. Toronto: University of Toronto Press.
Wong, H. L., and J. E. Luco. 1986. “Dynamic interaction between rigid foundations in a layered half-space.” Soil Dyn. Earthquake Eng. 5 (3): 149–158. https://doi.org/10.1016/0267-7261(86)90018-7.
Yadav, R. K., S. Saran, and D. Shankar. 2017. “Interference between two adjacent footings located in seismic region.” Geosciences 7 (4): 129–140. https://doi.org/10.3390/geosciences7040129.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 6, 2020
Accepted: Mar 12, 2021
Published online: May 19, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 19, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Maedeh Akhavan Tavakoli, Hessam Fathipour, Meghdad Payan, Reza Jamshidi Chenari, Hadi Ahmadi, Seismic bearing capacity of shallow foundations subjected to inclined and eccentric loading using modified pseudo-dynamic method, Transportation Geotechnics, 10.1016/j.trgeo.2023.100979, 40, (100979), (2023).
- Sabina Pourghaffar Maghferati, Reza Jamshidi Chenari, Seyed Hamid Lajevardi, Meghdad Payan, Seyed Mohammad Mirhosseini, Seismic combined bearing capacity of strip footings on partially saturated soils using lower bound theorem of finite element limit analysis and second-order cone programming, Computers and Geotechnics, 10.1016/j.compgeo.2023.105327, 157, (105327), (2023).
- Meghdad Payan, Hessam Fathipour, Maryam Hosseini, Reza Jamshidi Chenari, Jim S. Shiau, Lower Bound Finite Element Limit Analysis of Geo-Structures with Non-Associated Flow Rule, Computers and Geotechnics, 10.1016/j.compgeo.2022.104803, 147, (104803), (2022).
- Abhijit Anand, Rajib Sarkar, A comprehensive investigation on bearing capacity of shallow foundations on unsaturated fly ash slopes adopting finite element limit analysis, European Journal of Environmental and Civil Engineering, 10.1080/19648189.2021.1967200, 26, 14, (6914-6940), (2021).