Experimental Evaluation and Stress–Fractional Modeling of the State-Dependent Behavior of Rockfill
Publication: International Journal of Geomechanics
Volume 21, Issue 7
Abstract
As one of the main filled materials of the Lianghekou (LHK) rockfill dam, the strength and deformation characteristics of LHK rockfill is of great interest for hydraulic and geotechnical engineers. Correct interpretation of the state-dependent behavior of LHK rockfill is necessary for the design, construction, and operation of the dam. Therefore, a series of large-scale triaxial tests on LHK rockfill with different initial states were carried out in this study, where the state-dependent strength and deformation behaviors of LHK rockfill were investigated. It was found that both the phase transformation state and peak state of LHK rockfill are dependent on the material state. To capture such state-dependent behavior, two elastoplastic models (i.e., α1-model and α2-model) based on different stress–fractional concepts were developed and compared. It was found that the fractional order (α1) in α1-model exhibits insignificant dependence on the material state of LHK rockfill, whereas the fractional order (α2) in α2-model is dependent on the material state. As the fractional order determines the plastic flow direction of rockfill, it should be identified carefully, otherwise, an overestimation or underestimation of the critical-state stress may occur when using α2-model. Further validation against the large-scale triaxial data of LHK rockfill shows that without using additional plastic potentials, the two models can reasonably reproduce the state-dependent behavior of LHK rockfill. A slightly better performance on simulating the stress–strain response is observed when using α1-model, whereas α2-model works better when simulating the stress–dilatancy response.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available in a repository or online in accordance with funder data retention policies. Triaxial data for LHK Rockfill: https://www.researchgate.net/publication/345991955_triaxial_data_for_LHK_Rockfill.
Acknowledgments
The financial support provided by the National Natural Science Foundation of China (Grant No. 51890912) and the Alexander Von Humboldt Foundation, Germany, is appreciated. The two authors contributed equally to this study.
References
ASTM. 2011. Standard test method for consolidated drained triaxial compression test for soils. West Conshohocken, PA: ASTM International.
ASTM. 2014a. Standard test methods for minimum index density and unit weight of soils and calculation of relative density. West Conshohocken, PA: ASTM International.
ASTM. 2014b. Standard test methods for maximum index density and unit weight of soils using a vibratory table. West Conshohocken, PA: ASTM International.
ASTM. 2015. Standard test method for relative density (specific gravity) and absorption of coarse aggregate. West Conshohocken, PA: ASTM International.
Bardet, J. P. 1986. “Bounding surface plasticity model for sands.” J. Eng. Mech. 112 (11): 1198–1217. https://doi.org/10.1061/(ASCE)0733-9399(1986)112:11(1198).
Been, K., and M. G. Jefferies. 1985. “A state parameter for sands.” Géotechnique 35 (2): 99–112. https://doi.org/10.1680/geot.1985.35.2.99.
Dafalias, Y. F. 1986. “Bounding surface plasticity. I: Mathematical foundation and hypoplasticity.” J. Eng. Mech. 112 (9): 966–987. https://doi.org/10.1061/(ASCE)0733-9399(1986)112:9(966).
Daouadji, A., and P. Y. Hicher. 2010. “An enhanced constitutive model for crushable granular materials.” Int. J. Numer. Anal. Methods Geomech. 34 (6): 555–580. https://doi.org/10.1002/nag.815.
Duncan, J. M., and C.-Y. Chang. 1970. “Nonlinear analysis of stress and strain in soils.” J. Soil Mech. Found. Div. 96 (5): 1629–1653. https://doi.org/10.1061/JSFEAQ.0001458.
Fu, Z., S. Chen, and H. Han. 2016. “Experimental investigations on the residual strain behavior of a rockfill material subjected to dynamic loading.” J. Mater. Civ. Eng. 29 (5): 04016278. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001816.
Fu, Z., S. Chen, and C. Peng. 2014. “Modeling cyclic behavior of rockfill materials in a framework of generalized plasticity.” Int. J. Geomech. 14 (2): 191–204. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000302.
Fu, Z., S. Chen, and B. Shi. 2018. “Large-scale triaxial experiments on the creep behavior of a saturated rockfill material.” J. Geotech. Geoenviron. Eng. 144 (7): 04018039. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001898.
Hardin, B. O., and J. F. E. Richart. 1963. “Elastic wave velocities in granular soils.” J. Soil Mech. Found. Div. 89 (1): 33–65. https://doi.org/10.1061/JSFEAQ.0000493.
Honkanadavar, N. P., and K. G. Sharma. 2014. “Testing and modeling the behavior of riverbed and blasted quarried rockfill materials.” Int. J. Geomech. 14 (6): 04014028. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000378.
Honkanadavar, N. P., and K. G. Sharma. 2016. “Modeling the triaxial behavior of riverbed and blasted quarried rockfill materials using hardening soil model.” J. Rock Mech. Geotech. Eng. 8 (3): 350–365. https://doi.org/10.1016/j.jrmge.2015.09.007.
Li, X. S., and Y. F. Dafalias. 2000. “Dilatancy for cohesionless soils.” Géotechnique 50 (4): 449–460. https://doi.org/10.1680/geot.2000.50.4.449.
Liu, M., and Y. Gao. 2017. “Constitutive modeling of coarse-grained materials incorporating the effect of particle breakage on critical state behavior in a framework of generalized plasticity.” Int. J. Geomech. 17 (5): 04016113. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000759.
Liu, M., Y. Gao, and H. Liu. 2014. “An elastoplastic constitutive model for rockfills incorporating energy dissipation of nonlinear friction and particle breakage.” Int. J. Numer. Anal. Methods Geomech. 38 (9): 935–960. https://doi.org/10.1002/nag.2243.
Liu, M., Y. Zhang, and H. Zhu. 2017. “3D elastoplastic model for crushable soils with explicit formulation of particle crushing.” J. Eng. Mech. 143 (12): 04017140. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001361.
Lu, D., J. Liang, X. Du, C. Ma, and Z. Gao. 2019. “Fractional elastoplastic constitutive model for soils based on a novel 3D fractional plastic flow rule.” Comput. Geotech. 105: 277–290. https://doi.org/10.1016/j.compgeo.2018.10.004.
Lu, M., and G. R. McDowell. 2010. “Discrete element modelling of railway ballast under monotonic and cyclic triaxial loading.” Géotechnique 60 (6): 459–467. https://doi.org/10.1680/geot.2010.60.6.459.
Luzzani, L., and M. R. Coop. 2002. “On the relationship between particle breakage and the critical state of sands.” Soils Found. 42 (2): 71–82. https://doi.org/10.3208/sandf.42.2_71.
Manzari, M. T., and Y. F. Dafalias. 1997. “A critical state two-surface plasticity model for sands.” Géotechnique 47 (2): 255–272. https://doi.org/10.1680/geot.1997.47.2.255.
Marachi, N. D., C. K. Chan, and H. B. Seed. 1972. “Evaluation of properties of rockfill materials.” J. Soil Mech. Found. Div. 98 (1): 95–114. https://doi.org/10.1061/JSFEAQ.0001735.
Ovalle, C., E. Frossard, C. Dano, W. Hu, S. Maiolino, and P.-Y. Hicher. 2014. “The effect of size on the strength of coarse rock aggregates and large rockfill samples through experimental data.” Acta Mech. 225 (8): 2199–2216. https://doi.org/10.1007/s00707-014-1127-z.
Russell, A. R., and N. Khalili. 2002. “Drained cavity expansion in sands exhibiting particle crushing.” Int. J. Numer. Anal. Methods Geomech. 26 (4): 323–340. https://doi.org/10.1002/nag.203.
Schofield, A., and P. Wroth. 1968. Critical state soil mechanics. London: McGraw-Hill.
Sheng, D., Y. Yao, and J. P. Carter. 2008. “A volume–stress model for sands under isotropic and critical stress states.” Can. Geotech. J. 45 (11): 1639–1645. https://doi.org/10.1139/T08-085.
Shi, W., J. Zhu, C. Chiu, and H. Liu. 2010. “Strength and deformation behaviour of coarse-grained soil by true triaxial tests.” J. Central South Univ. Technol. 17 (5): 1095–1102. https://doi.org/10.1007/s11771-010-0602-5.
Shi, X. S., J. Nie, J. Zhao, and Y. Gao. 2020. “A homogenization equation for the small strain stiffness of gap-graded granular materials.” Comput. Geotech. 121: 103440. https://doi.org/10.1016/j.compgeo.2020.103440.
Shi, X. S., and J. Zhao. 2020. “Practical estimation of compression behavior of clayey/silty sands using equivalent void-ratio concept.” J. Geotech. Geoenviron. Eng. 146 (6): 04020046. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002267.
Sun, Y. 2020. “A simple stress-dilatancy equation for sand.” Preprint, submitted June 11, 2020. https://arxiv.org/abs/2006.06638.
Sun, Y., Y. Gao, and Y. Shen. 2019. “Mathematical aspect of the state-dependent stress-dilatancy of granular soil under triaxial loading.” Géotechnique 69 (2): 158–165. https://doi.org/10.1680/jgeot.17.T.029.
Sun, Y., Y. Gao, and Q. Zhu. 2018. “Fractional order plasticity modelling of state-dependent behaviour of granular soils without using plastic potential.” Int. J. Plast. 102: 53–69. https://doi.org/10.1016/j.ijplas.2017.12.001.
Sun, Y., W. Sumelka, and Y. Gao. 2020. “Bounding surface plasticity for sand using fractional flow rule and modified critical state line.” Arch. Appl. Mech. 90 (11): 2561–2577. https://doi.org/10.1007/s00419-020-01737-9.
Varadarajan, A., K. G. Sharma, S. M. Abbas, and A. K. Dhawan. 2006. “Constitutive model for rockfill materials and determination of material constants.” Int. J. Geomech. 6 (4): 226–237. https://doi.org/10.1061/(ASCE)1532-3641(2006)6:4(226).
Verdugo, R., and K. Ishihara. 1996. “The steady state of sandy soils.” Soils Found. 36 (2): 81–91. https://doi.org/10.3208/sandf.36.2_81.
Vermeer, P. A. 1978. “A double hardening model for sand.” Géotechnique 28 (4): 413–433. https://doi.org/10.1680/geot.1978.28.4.413.
Wichtmann, T., and T. Triantafyllidis. 2017. “Monotonic and cyclic tests on kaolin: A database for the development, calibration and verification of constitutive models for cohesive soils with focus to cyclic loading.” Acta Geotech. 13 (5): 1103–1128. https://doi.org/10.1007/s11440-017-0588-3.
Xiao, Y., H. Chen, W. Stuedlein Armin, T. M. Evans, J. Chu, L. Cheng, N. Jiang, H. Lin, H. Liu, and H. M. Aboel-Naga. 2020. “Restraint of particle breakage by biotreatment method.” J. Geotech. Geoenviron. Eng. 146 (11): 04020123. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002384.
Xiao, Y., and H. Liu. 2017. “Elastoplastic constitutive model for rockfill materials considering particle breakage.” Int. J. Geomech. 17 (1): 04016041. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000681.
Xiao, Y., H. Liu, Y. Chen, and J. Jiang. 2014a. “Strength and deformation of rockfill material based on large-scale triaxial compression tests. I: Influences of density and pressure.” J. Geotech. Geoenviron. Eng. 140 (12): 04014070. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001176.
Xiao, Y., H. Liu, Y. Chen, J. Jiang, and W. Zhang. 2014b. “Testing and modeling of the state-dependent behaviors of rockfill material.” Comput. Geotech. 61: 153–165. https://doi.org/10.1016/j.compgeo.2014.05.009.
Xiao, Y., L. Long, T. Matthew Evans, H. Zhou, H. Liu, and W. Stuedlein Armin. 2019a. “Effect of particle shape on stress-dilatancy responses of medium-dense sands.” J. Geotech. Geoenviron. Eng. 145 (2): 04018105. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001994.
Xiao, Y., M. Meng, Q. Chen, and B. Nan. 2018. “Friction and dilatancy angles of granular soils incorporating effects of shearing modes.” Int. J. Geomech. 18 (11): 06018027. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001289.
Xiao, Y., Z. Sun, A. M. Stuedlein, C. Wang, Z. Wu, and Z. Zhang. 2019b. “Bounding surface plasticity model for stress-strain and grain-crushing behaviors of rockfill materials.” Geosci. Front. 11 (2): 495–510. https://doi.org/10.1016/j.gsf.2019.06.010.
Xiao, Y., L. Wang, X. Jiang, T. M. Evans, W. Stuedlein Armin, and H. Liu. 2019c. “Acoustic emission and force drop in grain crushing of carbonate sands.” J. Geotech. Geoenviron. Eng. 145 (9): 04019057. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002141.
Yao, Y.-P., L. Liu, T. Luo, Y. Tian, and J. M. Zhang. 2019. “Unified hardening (UH) model for clays and sands.” Comput. Geotech. 110: 326–343. https://doi.org/10.1016/j.compgeo.2019.02.024.
Yao, Y. P., D. A. Sun, and T. Luo. 2004. “A critical state model for sands dependent on stress and density.” Int. J. Numer. Anal. Methods Geomech. 28 (4): 323–337. https://doi.org/10.1002/nag.340.
Yin, Z. Y., J. Li, Y. F. Jin, and F. Y. Liu. 2019. “Estimation of robustness of time integration algorithms for elasto-viscoplastic modeling of soils.” Int. J. Geomech. 19 (2): 04018197. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001351.
Yin, Z.-Y., Z.-X. Wu, and P.-Y. Hicher. 2018. “Modeling monotonic and cyclic behavior of granular materials by exponential constitutive function.” J. Eng. Mech. 144 (4): 04018014. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001437.
Zhang, J., and M. Luo. 2020. “Dilatancy and critical state of calcareous sand incorporating particle breakage.” Int. J. Geomech. 20 (4): 04020030. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001637.
Zhao, J., and N. Guo. 2013. “Unique critical state characteristics in granular media considering fabric anisotropy.” Géotechnique 63 (8): 695–704. https://doi.org/10.1680/geot.12.P.040.
Zhao, J., and Z. Gao. 2015. “Unified anisotropic elastoplastic model for sand.” J. Eng. Mech. 142 (1): 04015056. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000962.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 21, 2020
Accepted: Feb 19, 2021
Published online: Apr 28, 2021
Published in print: Jul 1, 2021
Discussion open until: Sep 28, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Yang Xiao, Hao Cui, Musharraf Zaman, Jinquan Shi, Huanran Wu, Constitutive Modeling for Biocemented Calcareous Sands, International Journal of Geomechanics, 10.1061/IJGNAI.GMENG-9089, 24, 8, (2024).
- Shao-Heng He, Meisam Goudarzy, Zhi Ding, Yifei Sun, Strength, Deformation, and Particle Breakage Behavior of Calcareous Sand: Role of Anisotropic Consolidation, Journal of Geotechnical and Geoenvironmental Engineering, 10.1061/JGGEFK.GTENG-10501, 149, 3, (2023).
- Huimin Tan, Congyang Yu, Yifei Sun, Improved Mechanical Performance of Gravel Reinforced by Polyurethane Polymer Adhesive, Journal of Materials in Civil Engineering, 10.1061/(ASCE)MT.1943-5533.0004711, 35, 4, (2023).
- Yifei Sun, Wojciech Sumelka, Multiaxial stress-fractional plasticity model for anisotropically overconsolidated clay, International Journal of Mechanical Sciences, 10.1016/j.ijmecsci.2021.106598, 205, (106598), (2021).