Stability of Circular Tunnels in Clay with an Overlay of Sand
Publication: International Journal of Geomechanics
Volume 19, Issue 3
Abstract
In the present study, numerical solutions have been developed to determine the internal compressive normal pressure required to be offered by the support system for maintaining the stability of long, circular tunnels located in clay with an overlay of sand. The compressive normal pressure is assumed to be uniform on the periphery of the tunnel, which can be offered by means of lining. The solutions were obtained on the basis of a finite-element lower-bound limit analysis and second-order cone programming. For different angles of internal friction of sand, the solutions have been obtained by varying the ratio of unit weight of the upper sand layer relative to that of the lower clay layer. The magnitude of required support pressure is found to be decreasing continuously with an increase in the internal friction angle of the overlying sandy soil for a given cover of the tunnel. The increase or decrease in the magnitude of support pressure required in the layered soil medium as compared to the case of the homogenous clay layer with properties same as that of the lower clay layer depends on the combined influence of the unit weight ratio, the thickness of both layers, and the angle of internal friction of the overlying sand layer. The parametric design charts are developed, which can be utilized by practicing engineers for determining the thickness and stiffness of lining for circular tunnels excavated in the clay underlying sand layer.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abbo, A. J., D. W. Wilson, S. W. Sloan, and A. V. Lyamin. 2013. “Undrained stability of wide rectangular tunnels.” Comput. Geotech. 53 (Sept): 46–59. https://doi.org/10.1016/j.compgeo.2013.04.005.
Atkinson, J. H., and D. M. Potts. 1977. “Stability of a shallow circular tunnel in cohesionless soil.” Géotechnique 27 (2): 203–215. https://doi.org/10.1680/geot.1977.27.2.203.
Broms, B. B., and H. Bennermark. 1967. “Stability of clay in vertical openings.” J. Soil Mech. Found. Div. 93 (1): 71–94.
Chambon, P., and J. F. Corté. 1994. “Shallow tunnels in cohesionless soil: stability of tunnel face.” J. Geotech. Eng. 120 (7): 1148–1165. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:7(1148).
Davis, E. H. 1968. “Theories of plasticity and failures of soil masses.” In Soil mechanics, selected topics, edited by I. K. Lee, 341–380. London: Butterworths.
Davis, E. H., M. J. Gunn, R. J. Mair, and H. N. Seneviratine. 1980. “The stability of shallow tunnels and underground openings in cohesive material.” Géotechnique 30 (4): 397–416. https://doi.org/10.1680/geot.1980.30.4.397.
Drescher, A., and E. Detournay. 1993. “Limit load in translational failure mechanisms for associative and non-associative materials.” Géotechnique 43 (3): 443–456. https://doi.org/10.1680/geot.1993.43.3.443.
Drucker, D. C. 1953. “Limit analysis of two and three dimensional soil mechanics problems.” J. Mech. Phys. Solids 1: 217–226.
Grant, R. J., and R. N. Taylor. 2000. “ Stability of tunnels in clay with overlying layers of coarse-grained soil.” In Proc., GeoEng 2000: Int. Conf. on Geotech. Geological Eng. Lancaster, PA: Technomics.
Hagiwara, T., R. J. Grant, M. Calvello, and R. N. Taylor. 1999. “The effect of overlying strata on the distribution of ground movements induced by tunnelling in clay.” Soil Found. 39 (3): 63–73. https://doi.org/10.3208/sandf.39.3_63.
Kim, J., R. Salgado, and J. Lee. 2002. “Stability analysis of complex soil slopes using limit analysis.” J. Geotech. Geoenviron. Eng. 128 (7): 546–557. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:7(546).
Klar, A., A. S. Osman, and M. Bolton. 2007. “2D and 3D upper bound solutions for tunnel excavation using ‘elastic’ flow fields.” Int. J. Num. Analyt. Meth. Geomech. 31 (12): 1367–1374. https://doi.org/10.1002/nag.597.
Leca, E., and L. Dormieux. 1990. “Upper and lower bound solutions for the face stability of shallow circular tunnels in frictional material.” Géotechnique 40 (4): 581–606. https://doi.org/10.1680/geot.1990.40.4.581.
Lee, C. J., B. R. Wu, H. T. Chen, and K. H. Chiang. 2006. “Tunnel stability and arching effects during tunneling in soft clayey soil.” Tunnelling Underground Space Technol. 21 (2): 119–132. https://doi.org/10.1016/j.tust.2005.06.003.
Lin, S. Y., H. H. Hung, J. P. Yang, and Y. B. Yang. 2017. “Seismic analysis of twin tunnels by a finite/infinite element approach.” Int. J. Geomech. 17 (9): 04017060. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000940.
Makrodimopoulos, A., and C. M. Martin. 2006. “Lower bound limit analysis of cohesive‐frictional materials using second‐order cone programming.” Int. J. Num. Meth. Eng. 66 (4): 604–634. https://doi.org/10.1002/nme.1567.
MOSEK ApS. 2015. The MOSEK optimization toolbox for MATLAB manual. Version 7.1 (Revision 28). Copenhagen, Denmark: MOSEK ApS.
Nunes, M. A., and M. A. Meguid. 2009. “A study on the effects of overlying soil strata on the stresses developing in a tunnel lining.” Tunnelling Underground Space Technol. 24 (6): 716–722. https://doi.org/10.1016/j.tust.2009.04.002.
Osman, A. S., R. J. Mair, and M. D. Bolton. 2006. “On the kinematics of 2D tunnel collapse in undrained clay.” Géotechnique 56 (9): 585–595. https://doi.org/10.1680/geot.2006.56.9.585.
Qian, Z. G., A. J. Li, A. V. Lyamin, and C. C. Wang. 2017. “Parametric studies of disturbed rock slope stability based on finite element limit analysis methods.” Comput. Geotech. 81 (Jan): 155–166. https://doi.org/10.1016/j.compgeo.2016.08.012.
Sahoo, J. P., and J. Kumar. 2013. “Stability of long unsupported twin circular tunnels in soils.” Tunnelling Underground Space Technol. 38 (Sept): 326–335. https://doi.org/10.1016/j.tust.2013.07.005.
Sahoo, J. P., and J. Kumar. 2014. “Stability of a circular tunnel in presence of pseudostatic seismic body forces.” Tunnelling Underground Space Technol. 42 (May): 264–276. https://doi.org/10.1016/j.tust.2014.03.003.
Sahoo, J. P., and J. Kumar. 2018. Forthcoming. “Required lining pressure for the stability of twin circular tunnels in soils.” Int. J. Geomech. 18 (7): 0401806. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001196.
Sloan, S. W. 1988. “Lower bound limit analysis using finite elements and linear programming.” Int. J. Num. Analyt. Meth. Geomech. 12 (1): 61–77. https://doi.org/10.1002/nag.1610120105.
Sloan, S. W., and A. Assadi. 1991. “Undrained stability of a square tunnel in a soil whose strength increases linearly with depth.” Comput. Geotech. 12 (4): 321–346. https://doi.org/10.1016/0266-352X(91)90028-E.
Wilson, D. W., A. J. Abbo, S. W. Sloan, and A. V. Lyamin. 2011. “Undrained stability of a circular tunnel where the shear strength increases linearly with depth.” Can. Geotech. J. 48 (9): 1328–1342. https://doi.org/10.1139/t11-041.
Wu, B. R., and C. J. Lee. 2003. “Ground movements and collapse mechanisms induced by tunneling in clayey soil.” Int. J. Phys. Modell. Geotech. 3 (4): 15–30. https://doi.org/10.1680/ijpmg.2003.030402.
Yang, F., and J. S. Yang. 2010. “Stability of shallow tunnel using rigid blocks and finite-element upper bound solutions.” Int. J. Geomech. 10 (6): 242–247. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000011.
Yang, F., J. Zhang, J. Yang, L. Zhao, and X. Zheng. 2015. “Stability analysis of unlined elliptical tunnel using finite element upper-bound method with rigid translatory moving elements.” Tunnelling Underground Space Tech. 50 (Aug): 13–22. https://doi.org/10.1016/j.tust.2015.06.005.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Mar 27, 2018
Accepted: Aug 31, 2018
Published online: Dec 26, 2018
Published in print: Mar 1, 2019
Discussion open until: May 26, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.