Geotechnical Design and Design Optimization of a Pile-Raft Foundation for Tall Onshore Wind Turbines in Multilayered Clay
Publication: International Journal of Geomechanics
Volume 18, Issue 2
Abstract
Although the pile-raft foundation is preferred for supporting a tall wind turbine, the geotechnical design and selection of suitable design parameters are based on a complex procedure. Except the foundation, all the other aboveground components are precast members that are assembled at the project site to build a wind turbine. Therefore, it is necessary to consider the possible variations in soil properties and wind speed in the design of the foundation. In this paper, a reliability-based robust design procedure for a pile-raft foundation that supports a 130-m-tall wind turbine on a layered clayey soil is presented. Upon completion of the geotechnical design for the mean wind speed and undrained shear strength, a parametric study and Monte Carlo simulation were conducted by varying the wind speed and the undrained cohesion of each layer to establish a relationship among the design variables (number and length of piles and radius of the raft) and the random variables (wind speed and undrained cohesion). Finally, a reliability-based robust design was created considering the total cost and robustness as the objectives. The standard deviation of the response of concern, which is the differential settlement, was considered the measure of robustness. The optimization yielded a set of preferred designs known as the Pareto front, and the suitable design was selected for a given cost limitation and performance requirement using the Pareto front.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASCE. (2010). “Minimum design loads for buildings and other structures.” Standard ASCE/SEI 7-10, ASCE, Reston, VA.
Ben-Hassine, J., and Griffiths, D. V. (2012). “Reliability based design of foundations subjected to combined loading with applications to wind turbine foundations.” Proc., 11th Int. Congress on Numerical Methods in Engineering and Scientific Applications, E. Dávila, G. Uzcátegui, and M. Cerrolaza, eds., Venezuelan Society of Numerical Methods in Engineering, Caracas, Venezuela, 17–23.
Coduto, D. P. (2001). Foundation design: Principles and practices, 2nd Ed., Prentice Hall, Upper Saddle River, NJ.
Das, B. M. (2011). Principles of foundation engineering, 7th Ed., Cengage Learning, Stamford, CT.
Deb, K., Pratap, A., Agarwal, S., and Meyarivan, T. (2002). “A fast and elitist multi objective genetic algorithm: NSGA-II.” IEEE Trans. Evol. Comput., 6(2), 182–197.
Gong, W., Khoshnevisan, S., and Juang, C. H. (2014). “Gradient-based design robustness measure for robust geotechnical design.” Can. Geotech. J., 51(11), 1331–1342.
Grünberg, J., and Göhlmann, J. (2013). Concrete structures for wind turbines, K. Bergmeister, F. Fingerloos, and J.-D. Wörner, eds., Ernst & Sohn, Berlin.
Gudmundsdottir, B. (1981). “Laterally loaded piles.” M.S. thesis, Univ. of Alberta, Edmonton, AB, Canada.
GWEC (Global Wind Energy Council) (2015). “Global wind report: Annual market update 2015.” Brussels.
Hemsley, J. A. (2000). Design applications of raft foundations, Thomas Telford Ltd., London,.
Hough, B. K. (1957). Basic soils engineering, Ronald Press, New York.
Juang, C. H., and Wang, L. (2013). “Reliability-based robust geotechnical design of spread foundations using multi-objective genetic algorithm.” Comput. Geotech., 48(Mar), 96–106.
Juang, C. H., Wang, L., Liu, Z., Ravichandran, N., Huang, H., and Zhang, J. (2013). “Robust geotechnical design of drilled shafts in sand: New design perspective.” J. Geotech. Geoenviron. Eng., 2007–2019.
Khoshnevisan, S., Wang, L., and Juang, C. H. (2016). “Simplified procedure for reliability-based robust geotechnical design of drilled shafts in clay using spreadsheet.” Georisk Assess. Manage. Risk Eng. Syst. Geohazards, 10(2), 121–134.
Kulhawy, F. H., and Mayne, P. W. (1990). “Manual on estimating soil properties for foundation design.” Rep. EL-6800, Project 1493-6, Cornell Univ., Ithaca, NY.
Lewin, T. J. (2010). “An investigation of design alternatives for 328-ft (100-m) tall wind turbine towers.” M.S. thesis, Iowa State Univ., Ames, IA.
Malhotra, S. (2011). “Chapter 10: Selection, design and construction of offshore wind turbine foundations.” Wind turbines, I. Al-Bahadly, ed., InTech, London.
Mayne, P. W., and Kemper, J. B. (1988). “Profiling OCR in stiff clays by CPT and SPT.” Geotech. Test. J., 11(2), 139–147.
Overgård, I. E. V., Depina, I., and Eiksund, G. (2016). “Reliability-based design of a monopile foundation for offshore wind turbines based on CPT data.” Proc., 17th Nordic Geotechnical Meeting: Challenges in Nordic Geotechnics, Icelandic Geotechnical Society, Reykjavik, Iceland, 495–502.
Phillip, W., and Adrian, C. (2013). RSMeans building construction cost data, 71 Ed., The Gordian Group, Rockland, MA.
Poulos, H. G., and Davis, E. H. (1980). Pile foundation analysis and design, T. W. Lambe and R. V. Whitman, eds., Wiley, New York.
Poulos, H. G. (2001a). “Methods of analysis of piled raft foundations.” Technical Committee TC-18 on Piled Foundations, International Society of Soil Mechanics and Geotechnical Engineering.
Poulos, H. G. (2001b). “Piled raft foundation: Design and applications.” Géotechnique, 51(2), 95–113.
Raju, V. S. (2015). “Piled raft.” V. S. Raju Consultants, Geotechnical and Structural Engineers, Chennai, India.
Randolph, M. F. (1994). “Design methods for pile groups and piled rafts.” Proc., 13th Int. Conf., Soil Mechanics and Foundation Engineering, CRC Press, Boca Raton, FL, 61–82.
Reul, O. (2004). “Numerical study of the bearing behavior of piled rafts.” Int. J. Geomech., 59–68.
Sinha, A., and Hanna, A. M. (2017). “3D numerical model for piled raft foundation.” Int. J.Geomech., 04016055.
USACE. (1990). “Engineering and design—Settlement analysis.” Engineer Manual 1100-1-1904.
Vesić, A. S. (1973). “Analysis of ultimate loads of shallow foundations.” J. Soil Mech. Found. Div., 99(1), 45–73.
Vesić, A. S. (1975). “Bearing capacity of shallow foundations.” Foundation engineering handbook, 1st Ed., H. F. Winterkorn and H.-Y. Fang, eds., Van Nostrand Reinhold Company, New York.
Wagner, H.-J., and Mathur, J. (2013). Introduction to wind energy systems: Basics, technology and operation, 2nd Ed., Springer, Berlin.
Wang, Y. (2009). “Reliability-based economic design optimization of spread foundations.” J. Geotech. Geoenviron. Eng., 954–959.
WPC. (2010). “Clemson Wind Turbine Testing Facility North Charleston, South Carolina.” Geotechnical Engineering Rep., WPC Project No. EN105060, Charleston, SC.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Mar 15, 2017
Accepted: Aug 18, 2017
Published online: Nov 28, 2017
Published in print: Feb 1, 2018
Discussion open until: Apr 28, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.