Abstract
Overconsolidated unsaturated soils emerge in many engineering problems. This article presents a constitutive model for unsaturated soils using skeleton stress and degree of saturation as fundamental variables. A subloading surface is introduced into the framework to interpret the effect of overconsolidation on the coupled hydromechanical behavior of overconsolidated unsaturated soils. The main advantage of the proposed model is that it is capable of reproducing the hydromechanical behavior of unsaturated soils with different initial overconsolidation ratios, such as the overconsolidation effect on the shearing-induced saturation change. The material parameters of the proposed model can be calibrated through conventional tests. Numerical studies were conducted to assess the performance of the model for a fictional silt under two typical scenarios. The validity of the proposed model was confirmed by experimental results for both isotropic and triaxial conditions reported in the literature.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors appreciate the financial support of the National Natural Science Foundation of China (Grants 51639002 and 41572252) and the Doctoral Scientific Research Foundation of Liaoning Province (Grant 201601055).
References
Alonso, E. E., Gens, A., and Josa, A. (1990). “A constitutive model for partially saturated soils.” Géotechnique, 40(3), 405–430.
Bishop, A. W., and Blight, G. E. (1963). “Some aspects of effective stress in saturated and partly saturated soils.” Géotechnique, 13(3), 177–197.
Bolzon, G., Schrefler, B. A., and Zienkiewicz, O. C. (1996). “Elastoplastic soil constitutive laws generalized to partially saturated states.” Géotechnique, 46(2), 279–289.
Cui, Y. J., and Delage, P. (1996). “Yielding and plastic behaviour of an unsaturated compacted silt.” Géotechnique, 46(2), 291–311.
Dafalias, Y. F. (1986). “Bounding surface plasticity. I: Mathematical foundation and hypoplasticity.” J. Eng. Mech., 966–987.
Estabragh, A. R., and Javadi, A. A. (2008). “Critical state for overconsolidated unsaturated silty soil.” Can. Geotech. J., 45(3), 408–420.
Fredlund, D. G., and Xing, A. (1994). “Equations for the soil-water characteristic curve.” Can. Geotech. J., 31(4), 521–532.
Gallipoli, D., Gens, A., Sharma, R., and Vaunat, J. (2003). “An elasto-plastic model for unsaturated soil incorporating the effects of suction and degree of saturation on mechanical behaviour.” Géotechnique, 53(1), 123–136.
Gens, A. (2010). “Soil-environment interactions in geotechnical engineering.” Géotechnique, 60(1), 3–74.
Hashiguchi, K. (1989). “Subloading surface model in unconventional plasticity.” Int. J. Solids Struct., 25(8), 917–945.
Jotisankasa, A. (2005). “Collapse behaviour of a compacted silty clay.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Univ. of London, London.
Kohgo, Y., Asano, I., and Hayashida, Y. (2007). “An elastoplastic model for unsaturated rockfills and its simulations of laboratory tests.” Soils Found., 47(5), 919–929.
Kohgo, Y., Nakano, M., and Miyazaki, T. (1993). “Theoretical aspects of constitutive model for unsaturated soils.” Soils Found., 33(4), 49–63.
Li, X. S. (2005). “Modelling of hysteresis response for arbitrary wetting/drying paths.” Comput. Geotech., 32(2), 133–137.
Loret, B., and Khalili, N. (2002). “An effective stress elastic–plastic model for unsaturated porous media.” Mech. Mater., 34(2), 97–116.
Morvan, M., Wong, H., and Branque, D. (2010). “An unsaturated soil model with minimal number of parameters based on bounding surface plasticity.” Int. J. Numer. Anal. Methods Geomech., 34(14), 1512–1537.
Mualem, Y. (1976). “A new model for predicting the hydraulic conductivity of unsaturated porous media.” Water Resour. Res., 12(3), 513–522.
Roscoe, K. H., and Burland, J. B. (1968). “On the generalized stress-strain behaviour of wet clay.” Engineering plasticity, Cambridge Univ., Cambridge, U.K., 535–609.
Sharma, R. S. (1998). “Mechanical behaviour of unsaturated highly expansive clays.” Ph.D. thesis, Univ. of Oxford, Oxford, U.K.
Sheng, D. C., and Zhou, A.-N. (2011). “Coupling hydraulic with mechanical models for unsaturated soils.” Can. Geotech. J., 48(5), 826–840.
Sun, D. A., Cui, H. B., Matsuoka, H., and Sheng, D. C. (2007a). “A three-dimensional elastoplastic model for unsaturated compacted soils with hydraulic hysteresis.” Soils Found., 47(2), 253–264.
Sun, D. A., and Sheng, D. (2005). “An elastoplastic hydro-mechanical model for unsaturated compacted soils.” Advanced experimental unsaturated soil mechanic, A. Tarantino, E. Romero, Y. J. Cui eds., CRC, Boca Raton, FL, 249–255.
Sun, D. A., Sheng, D. C., Cui, H. B., and Sloan, S. W. (2007b). “A density‐dependent elastoplastic hydro‐mechanical model for unsaturated compacted soils.” Int. J. Numer. Anal. Methods Geomech., 31(11), 1257–1279.
Sun, D. A., Sheng, D. C., Xiang, L., and Sloan, S. W. (2008). “Elastoplastic prediction of hydro-mechanical behaviour of unsaturated soils under undrained conditions.” Comput. Geotech., 35(6), 845–852.
Sun, D. A., Sheng, D. C., and Xu, Y. (2007c). “Collapse behaviour of unsaturated compacted soil with different initial densities.” Can. Geotech. J., 44(6), 673–686.
Tamagnini, R. (2004). “An extended Cam-clay model for unsaturated soils with hydraulic hysteresis.” Géotechnique, 54(3), 223–228.
Van Genuchten, M. T. (1980). “A closed-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J., 44(5), 892–898.
Wheeler, S. J. (1996). “Inclusion of specific water volume within an elasto-plastic model for unsaturated soil.” Can. Geotech. J., 33(1), 42–57.
Wheeler, S. J., Sharma, R. S., and Buisson, M. S. R. (2003). “Coupling of hydraulic hysteresis and stress–strain behaviour in unsaturated soils.” Géotechnique, 53(1), 41–54.
Wheeler, S. J., and Sivakumar, V. (1995). “An elasto-plastic critical state framework for unsaturated soil.” Géotechnique, 45(1), 35–53.
Yao, Y.-P., Hou, W., and Zhou, A.-N. (2009). “UH model: Three-dimensional unified hardening model for overconsolidated clays.” Géotechnique, 59(5), 451–469.
Yao, Y. P., Niu, L., and Cui, W. J. (2014). “Unified hardening (UH) model for overconsolidated unsaturated soils.” Can. Geotech. J., 51(7), 810–821.
Zhang, F., and Ikariya, T. (2011). “A new model for unsaturated soil using skeleton stress and degree of saturation as state variables.” Soils Found., 51(1), 67–81.
Zhang, F., Ye, B., Noda, T., Nakano, M., and Nakai, K. (2007). “Explanation of cyclic mobility of soils: Approach by stress-induced anisotropy.” Soils Found., 47(4), 635–648.
Zhou, A.-N., and Sheng, D. C. (2015). “An advanced hydro-mechanical constitutive model for unsaturated soils with different initial densities.” Comput. Geotech., 63, 46–66.
Zhou, A.-N., Sheng, D. C., Sloan, S. W., and Gen, A. (2012). “Interpretation of unsaturated soil behaviour in the stress–saturation space, I: Volume change and water retention behaviour.” Comput. Geotech., 43, 178–187.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Oct 10, 2016
Accepted: Jul 31, 2017
Published online: Nov 28, 2017
Published in print: Feb 1, 2018
Discussion open until: Apr 28, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.