Simulation Ballasted Track Behavior: Numerical Treatment and Field Application
Publication: International Journal of Geomechanics
Volume 17, Issue 6
Abstract
The load deformation of ballasted rail tracks subjected to cyclic loading is investigated experimentally using a large-scale track process simulation apparatus and numerically through a combined discrete element–finite-difference approach. Laboratory tests were performed to examine the deformation and degradation of ballast subjected to cyclic loading at 15 Hz and a lateral confinement of . The laboratory results reveal that ballast undergoes significant deformation during the initial load cycles, followed by gradually increasing deformation attaining a steady value toward the end of testing. A numerical model based on a combined discrete element method (DEM) and finite-difference method (FDM) is introduced to study the load-deformation response of the ballast assembly while considering interaction between the ballast aggregates and the subgrade layer. In this coupled model, the discrete ballast grains are modeled by DEM, and the subgrade domain is modeled as a continuum by FDM. Interface elements are introduced to transmit the interacting forces and displacements between adjoining material domains in which the DEM transfers contact forces to the FDM, and then the FDM updates the displacements, which provides subsequent input into the DEM. This computational cycle continues with the increasing number of loading cycles. The numerical model is validated by comparing the predicted cyclic load-deformation response with the laboratory measurements. Contact force distributions and stress contours in the assembly are analyzed and presented graphically to interpret the behavior of the model track, and the effects that subgrade stiffness have on the axial strain and bond breakage of the ballast are investigated. This combined DEM-FDM analysis is also used to analyze the load deformation of an instrumented track in the town of Singleton, Australia, and the numerical predictions are compared with the field data.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful to Professor Glenn McDowell, who provided valuable discussions and comments during the preparation of the paper. The authors are also grateful for the financial support provided by the Australian Research Council (ARC). Laboratory assistance from technicians Alan Grant and Ian Bridge during the laboratory tests is also very much appreciated.
References
Anderson, W., and Fair, P. (2008). “Behavior of railroad ballast under monotonic and cyclic loading.” J. Geotech. Geoenviron. Eng., 316–327.
AS (Australian Standards). (1996). “Aggregates and rock for engineering purposes; Part 7: Railway ballast.” AS 2758.7, Sydney, NSW, Australia.
Bhandari, A., and Han, J. (2010). “Investigation of geotextile-soil interaction under a cyclic vertical load using the discrete element method.” Geotext. Geomembr., 28(1), 33–43.
Cui, L., and O’Sullivan, C. (2006). “Exploring the macro- and micro-scale response of an idealised granular material in the direct shear apdelpparatus.” Géotechnique, 56(7), 455–468.
Cundall, P. A., and Strack, O. D. L. (1979). “A discrete numerical model for granular assemblies.” Géotechnique, 29(1), 47–65.
Esveld, C. (2001). Modern railway track, MRT, Zaltbommel, Netherlands.
FLAC 6.0 [Computer software]. Itasca Consulting Group, Inc., Minneapolis.
Huang, H., and Tutumluer, E. (2011). “Discrete element modeling for fouled railroad ballast.” Constr. Build. Mater., 25(8), 3306–3312.
Indraratna, B., Ngo, N., and Rujikiatkamjorn, C. (2013). “Deformation of coal fouled ballast stabilized with geogrid under cyclic load.” J. Geotech. Geoenviron. Eng., 1275–1289.
Indraratna, B., Ngo, N., Rujikiatkamjorn, C., and Vinod, J. (2014a). “Behavior of fresh and fouled railway ballast subjected to direct shear testing: A discrete element simulation.” Int. J. Geomech., 34–44.
Indraratna, B., Ngo, N. T., and Rujikiatkamjorn, C. (2011a). “Behavior of geogrid-reinforced ballast under various levels of fouling.” Geotext. Geomembr., 29(3), 313–322.
Indraratna, B., and Nimbalkar, S. (2013). “Stress-strain degradation response of railway ballast stabilized with geosynthetics.” J. Geotech. Geoenviron. Eng., 684–700.
Indraratna, B., Nimbalkar, S., and Rujikiatkamjorn, C. (2014b). “From theory to practice in track geomechanics–Australian perspective for synthetic inclusions.” Transp. Geotech., 1(4), 171–187.
Indraratna, B., and Salim, W. (2005). Mechanics of ballasted rail tracks—A geotechnical perspective, Taylor & Francis/A. A. Balkema, London.
Indraratna, B., Salim, W., and Rujikiatkamjorn, C. (2011b). Advanced rail geotechnology—Ballasted track, CRC/Taylor & Francis Group, London.
Indraratna, B., Thakur, P., and Vinod, J. (2010). “Experimental and numerical study of railway ballast behavior under cyclic loading.” Int. J. Geomech., 136–144.
Itasca Consulting Group, Inc. (2012). Particle flow code in two and three dimensions, Minnesota.
Lackenby, J., Indraratna, B., McDowell, G. R., and Christie, D. (2007). “Effect of confining pressure on ballast degradation and deformation under cyclic triaxial loading.” Géotechnique, 57(6), 527–536.
Lobo-Guerrero, S., and Vallejo, L. E. (2006). “Discrete element method analysis of railtrack ballast degradation during cyclic loading.” Granular Matter, 8, 195–204.
Lobo-Guerrero, S., and Vallejo, L. E. (2010). “Crushing of particles under simulated static and centrifuge forces.” GeoFlorida 2010: Advances in analysis, modeling & design, Geotechnical special publication, 199, ASCE, Reston, VA, 550–559.
Lu, M., and McDowell, G. R. (2010). “Discrete element modelling of railway ballast under monotonic and cyclic triaxial loading.” Géotechnique, 60(6), 459–467.
McDowell, G. R., and Harireche, O. (2002). “Discrete element modelling of soil particle fracture.” Géotechnique, 52(2), 131–135.
McDowell, G. R., Harireche, O., Konietzky, H., Brown, S. F., and Thom, N. H. (2006). “Discrete element modelling of geogrid-reinforced aggregates.” Proc. Inst. Civ. Eng. Geotech. Eng., 159(1), 35–48.
Ngo, N., Indraratna, B., and Rujikiatkamjorn, C. (2016a). “Micromechanics-based investigation of fouled ballast using large-scale triaxial tests and discrete element modeling.” J. Geotech. Geoenviron. Eng., 04016089.
Ngo, N., Indraratna, B., Rujikiatkamjorn, C., and Biabani, M. (2016b). “Experimental and discrete element modeling of geocell-stabilized subballast subjected to cyclic loading.” J. Geotech. Geoenviron. Eng., 04015100.
Ngo, N. T., Indraratna, B., and Rujikiatkamjorn, C. (2014). “DEM simulation of the behaviour of geogrid stabilised ballast fouled with coal.” Comput. Geotech., 55, 224–231.
Oda, M., and Iwashita, K. (1999). Mechanics of granular materials: An introduction, A. A. Balkema, Rotterdam, Netherlands.
O’Sullivan, C. (2011). Particulate discrete element modelling: A geomechanics perspective, Spon, London.
O’Sullivan, C., and Cui, L. (2009). “Micromechanics of granular material response during load reversals: Combined DEM and experimental study.” Powder Technol., 193(3), 289–302.
PFC2D [Computer software]. Itasca Consulting Group, Inc., Minneapolis.
Selig, E. T., and Waters, J. M. (1994). Track geotechnology and substructure management, Thomas Telford, London.
Suiker, A., Selig, E., and Frenkel, R. (2005). “Static and cyclic triaxial testing of ballast and subballast.” J. Geotech. Geoenviron. Eng., 771–782.
Suiker, A. S. J., and Borst, R. (2003). “A numerical model for the cyclic deterioration of railway tracks.” Int. J. Numer. Methods Eng., 57(4), 441–470.
Tutumluer, E., Huang, H., and Bian, X. (2012). “Geogrid-aggregate interlock mechanism investigated through aggregate imaging-based discrete element modeling approach.” Int. J. Geomech., 391–398.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Apr 18, 2016
Accepted: Sep 13, 2016
Published online: Nov 1, 2016
Discussion open until: Apr 1, 2017
Published in print: Jun 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.