Three-Dimensional Element Partition Method for Fracture Simulation
Publication: International Journal of Geomechanics
Volume 16, Issue 3
Abstract
A three-dimensional (3D) element partition method for simulating fracture problems is proposed here. In this method, cracks are embedded into elements in a more straightforward manner without any nodal interpolation enrichment or any extra degrees of freedom introduced. When a crack runs across an element, the element is divided into two subbulk elements and one subsurface element. The intersection points between element edges and crack faces are taken as the virtual nodes. Thus, the displacements of the virtual nodes are the extra degrees of freedom. To eliminate these extra degrees of freedom, it is assumed that the displacements of the virtual node are related only to its adjacent nodes at the same side of the crack. The least-square interpolation technique is adopted to characterize their relationship. With this method, the cracked element deformation is related to its neighborhood. The stiffness matrix and nodal force vector are derived. The friction and contact effect between crack faces are implicitly incorporated into the numerical model through the subsurface element. With the 3D element partition method, the crack is allowed to embed into an element without mesh modification or remeshing, which makes the fracture simulation highly efficient.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The present work is supported by the National Natural Science Foundation of China (Grant 11172172), the National Basic Research Program of China (Grants 2011CB013505 and 2014CB047100), and State Key Laboratory for GeoMechanics and Deep Underground Engineering, China University of Mining and Technology (Grant SKLGDUEK1203), which are gratefully acknowledged.
References
Belytschko, T., and Black, T. (1999). “Elastic crack growth in finite elements with minimal remeshing.” Int. J. Numer. Methods Eng., 45(5), 601–620.
Dyskin, A. V., Jewell, R. J., Joer, H., Sahouryeh, E., Ustinov, K. B. (1994). “Experiments on 3-D crack growth in uniaxial compression.” Int. J. Fract., 65(4), R77–R83.
Dyskin, A. V., Sahouryeh, E., Jewell, R. J., Joer, H., and Ustinov, K. B. (2003). “Influence of shape and location of initial 3-D cracks on their growth in uniaxial compression.” Eng. Fract. Mech., 70(15), 2115–2136.
Huang, K., and Zhang, Z. N. (2010). “Three dimensional element partition method and numerical simulation of fractures subjected to compressive and shear stress.” Eng. Mech., 27(12), 51–58 (in Chinese).
Melenk, J. M., and Babuška, I. (1996). “The partition of unity finite element method: basic theory and applications.” Comput. Methods Appl. Mech. Eng., 39(1–4), 289–314.
Moës, N., Dolbow, J., and Belytschko, T. (1999). “Finite element method for crack growth without remeshing.” Int. J. Numer. Methods Eng., 46(1), 131–150.
Rahman, M., and Rahman, S. (2013a). “Fully coupled finite-element–based numerical model for investigation of interaction between an induced and a preexisting fracture in naturally fractured poroelastic reservoirs: Fracture diversion, arrest, and breakout.” Int. J. Geomech., 390–401.
Rahman, M., and Rahman, S. (2013b). “Studies of hydraulic fracture-propagation behavior in presence of natural fractures: Fully coupled fractured-reservoir modeling in poroelastic environments.” Int. J. Geomech., 809–826.
Sarris, E., and Papanastasiou, P. (2012). “Modeling of hydraulic fracturing in a poroelastic cohesive formation.” Int. J. Geomech., 160–167.
Zhang, Z., and Chen, Y. (2009). “Simulation of fracture propagation subjected to compressive and shear stress field using virtual multidimensional internal bonds.” Int. J. Rock Mech. Min. Sci., 46(6), 1010–1022.
Zhang, Z., and Gao, H. (2012). “Simulating fracture propagation in rock and concrete by an augmented virtual internal bond method.” Int. J. Numer. Anal. Methods Geomech., 36(4), 459–482.
Zhang, Z., Wang, D., and Ge, X. (2013a). “A novel triangular finite element partition method for fracture simulation without enrichment of interpolation.” Int. J. Comput. Methods, 10(4), 1350015.
Zhang, Z., Zheng, H., and Ge, X. (2013b). “Triangular element partition method with consideration of crack tip.” Sci. China Ser. E: Technol. Sci., 56(8), 2081–2088.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Oct 30, 2014
Accepted: Jul 29, 2015
Published online: Dec 7, 2015
Discussion open until: May 7, 2016
Published in print: Jun 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.