Predicting Soil Expansion Force during Static Pipe Bursting Using Cavity Expansion Solutions
Publication: International Journal of Geomechanics
Volume 16, Issue 3
Abstract
The prediction of total pull force is critical for static pipe-bursting installation. As a major component of the total pull force, soil expansion prediction is also important; however, there are currently limited methods available for such prediction. In this paper, three cavity expansion solutions were used to predict soil expansion pressure acting upon the expander (bursting head) during static pipe bursting. The determined soil expansion pressure was then used to calculate the expansion force required for pipe bursting with or without consideration of the soil collapse. Calculated results were then compared with those from laboratory pipe-bursting experiments to evaluate the feasibility of the calculation methods. The comparison indicated that the large-strain cavity expansion solution reasonably predicted the soil expansion force. The small-strain solution significantly overestimated the soil expansion force. Additionally, considering soil collapse during pipe bursting resulted in a remarkably higher calculated expansion force than that without consideration; in this study, the soil collapse effect should be taken into account because a sandy soil was used in the laboratory experiments.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the Natural Sciences and Engineering Research Council of Canada (NSERC) and the City of Edmonton for their financial support. The authors also thank the Consortium for Engineered Trenchless Technologies (CETT), University of Alberta, for providing this research opportunity, and Ms. Lauren Wozny at CETT for editorial review of this paper.
References
Ariaratnam, S. T., and Hahn, U. H. (2007). “Simplified model for numerical calculation of pull forces in static pipe-bursting operations.” Tunnelling Underground Space Technol., 22(5), 644–654.
Ariaratnam, S. T., Lueke, J. S., and Michael, J. K. (2014). “Current trends in pipe bursting for renewal of underground infrastructure systems in North America.” Tunnelling Underground Space Technol., 39, 41–49.
Bennett, R. D., Khan, S., and Ariaratnam, S. T. (2011). “NASTT pipe bursting good practices guidelines manual—2011.” North American Society for Trenchless Technology, Arlington, VA.
Brachman, R., McLeod, H., Moore, I., and Take, W. (2010). “Three-dimensional ground displacements from static pipe bursting in stiff clay.” Can. Geotech. J., 47(4), 439–450.
Carter, J. P., Booker, J. R., and Yeung, S. K. (1986). “Cavity expansion in cohesive frictional soils.” Géotechnique, 36(3), 349–358.
Chapman, D. N., Ng, P. C. F., and Karri, R. (2007). “Research needs for on-line pipeline replacement techniques.” Tunnelling Underground Space Technol., 22(5–6), 503–514.
Chehab, A. G., and Moore, I. (2010). “Pipe-soil shear interaction stiffness in horizontal directional drilling and pipe bursting.” Geomech. Geoeng., 5(2), 69–77.
Cholewa, J. A., Brachman, R. W. I., and Moore, I. D. (2009a). “Response of a polyvinyl chloride water pipe when transverse to an underlying pipe replaced by pipe bursting.” Can. Geotech. J., 46(11), 1258–1266.
Cholewa, J. A., Brachman, R. W. I., Moore, I. D., and Take, W. A. (2009b). Ground displacements from a pipe-bursting experiment in well-graded sand and gravel.” J. Geotech. Geoenviron. Eng., 135(11), 1713–1721.
Fernando, V., and Moore, I. D. (2002). “Use of cavity expansion theory to predict ground displacement during pipe bursting.” Proc., Pipelines 2002, ASCE, Reston, VA.
Houlsby, G. T. (1991). “How the dilatancy of soils affects their behaviour.” Proc., 10th European Conf. on Soil Mechanics and Foundation Engineering, Balkema, Rotterdam, the Netherlands.
Keulen, B. (2001). “Maximum allowable pressures during horizontal directional drillings focused on sand.” Delft Univ. of Technology, Delft, the Netherlands.
Lapos, B. (2004). “Laboratory study of static pipe bursting: Three-dimensional ground displacements and pull force during installation, and subsequent response of HDPE replacement pipes under surcharge loading.” Master’s thesis, Dept. of Civil Engineering, Queen’s Univ. at Kingston, Ontario, Canada.
Lapos, B., Brachman, R. W. I., and Moore, I. D. (2007). “Response to overburden pressure of an HDPE pipe pulled in place by pipe bursting.” Can. Geotech. J., 44(8), 957–965.
Lueke, J. S., and Ariaratnam, S. T. (2001). “Rehabilitation of underground infrastructure utilizing trenchless pipe replacement.” Pract. Period. Struct. Des. Constr., 25–34.
Luger, H. J., and Hergarden, H. J. A. M. (1988). “Directional drilling in soft soil: Influence of mud pressures.” Proc., 3rd Int. Conf. on Trenchless Technology—No Dig Conference, International Society for Transgenic Technologies, London.
Nkemitag, M. (2007). “Numerical investigation of ground movements and pulling forces during static pipe bursting.” Ph.D. thesis, Dept. of Civil Engineering, Queen’s Univ. at Kingston, Ontario, Canada.
Nkemitag, M., and Moore, I. D. (2007). “Longitudinal progression of burst head during pipe bursting: Calculation of pulling force.” Transportation Research Record, 2028, 203–210.
Plastics Pipe Institute. (2007). Handbook of polyethylene pipe, 2nd Ed, Plastics Pipe Institute, Irving, TX, 535–583.
Rahman, K. M. (2013). “Three dimensional numerical analysis of static pipe bursting.” Ph.D. thesis, Dept. of Civil Engineering, Queen’s Univ. at Kingston, Ontario, Canada.
Rogers, C. D. F., and Chapman, D. N. (1995). “An experimental study of pipebursting in sand.” Proc. Inst. Civ. Eng. Geotech. Eng., 113(1), 38–50.
Shi, J., Wang, Y., and Ng, C. W. (2013). “Buried pipeline responses to ground displacements induced by adjacent static pipe bursting.” Can. Geotech. J., 50(5), 481–492.
Timoshenko, S. P., Goodier, J. N., and Abramson, H. N. (1970). “Theory of elasticity.” J. Appl. Mech., 37(3), 888.
Vesić, A. S. (1972). “Expansion of cavities in infinite soil mass.” J. Soil Mech. Found Div., 98(3), 265–290.
Yu, H. S., and Carter, J. P. (2002). “Rigorous similarity solutions for cavity expansion in cohesive friction soils.” Int. J. Geomech., 2(2), 233–258.
Yu, H. S., and Houlsby, G. T. (1991). “Finite cavity expansion in dilatant soils: Loading analysis.” Géotechnique, 41(2), 173–183.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Sep 3, 2014
Accepted: Jul 15, 2015
Published online: Dec 7, 2015
Discussion open until: May 7, 2016
Published in print: Jun 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.