Numerical Analysis of Plate-Load Test Results on Fractured Rocks Using an Equivalent-Continuum Model: Case Study of the Bakhtiary Dam Site
Publication: International Journal of Geomechanics
Volume 15, Issue 1
Abstract
The plate-load test (PLT) is widely performed at large dam sites to determine the rock mass deformability. Analytical relations based on the theory of elasticity, as suggested by the International Society for Rock Mechanics and the American Society for Testing and Materials test standards, are commonly used to interpret the test results and calculate the rock mass deformation modulus. However, because of inconsistency of the test gallery geometry with the half-space medium assumption embedded in the analytical relations, a systematic error occurs in the calculation of the deformation modulus. Furthermore, when the tests are conducted on jointed rock masses, the test results show a considerable scatter, mainly due to the anisotropy of the deformability of jointed rock masses. In this paper, numerical modeling is used to interpret the results of a series of PLTs conducted at the Bakhtiary dam site in southwest Iran. An equivalent continuum model, called JointedRock, is used to back-calculate the stiffness of bedding planes from the test results. Finally, the equivalent continuum deformation moduli of the rock mass are determined numerically for various directions of loading relative to the orientation of major joint sets.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support of the Natural Sciences and Engineering Research Council of Canada. Thanks also go to the project manager of the Bakhtiary Dam and Hydroelectric Power Plant project for providing access to the test data.
References
Agharazi, A., Martin, C. D., and Tannant, D. D. (2012a). “A three-dimensional equivalent continuum constitutive model for jointed rock masses containing up to three random joint sets.” Geomech. Geoeng.: An Int. J., 7(4), 227–238.
Agharazi, A., Tannant, D., and Jafari, A. (2008). “Stress and tunnel geometry effects on deformation modulus derived from plate load tests.” Proc., Canadian Geotechnical Conf., Richmond, BC, Canada, 601–608.
Agharazi, A., Tannant, D. D., and Martin, C. D. (2012b). “Characterizing rock mass deformation mechanisms during plate load tests at the Bakhtiary dam project.” Int. J. Rock Mech. Min. Sci., 49(Jan.), 1–11.
ASTM. (2008). “Standard test method for determining in situ modulus of deformation of rock mass using rigid plate loading method.” D4394-08, West Conshohocken, PA.
Bieniawski, Z. T. (1978). “Determining rock mass deformability: Experience from case histories.” Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 15(5), 237–247.
Boyle, W. J. (1992). “Interpretation of plate load test data.” Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 29(2), 133–141.
Cai, M., and Horii, H. (1992). “A constitutive model of highly jointed rock masses.” Mech. Mater., 13(3), 217–246.
Cundall, P. A. (1988). “Formulation of a three-dimensional distinct element model—Part I. A scheme to detect and represent contacts in a system composed of many polyhedral blocks.” Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 25(3), 107–116.
Cundall, P. A., and Strack, O. D. L. (1979). “A discrete numerical model for granular assemblies.” Géotechnique, 29(1), 47–65.
FLAC3D 5.0.112 [Computer software]. Minneapolis, Itasca Consulting Group.
Goodman, R. E., and Shi, G. (1985). Block theory and its application to rock engineering, Prentice Hall, Englewood Cliffs, NJ.
Hoek, E. (2007). “Practical rock engineering.” 〈http://www.rocscience.com/hoek/pdf/Practical_Rock_Engineering.pdf〉 (May 31, 2013).
Hoek, E., Carranza-Torres, C., and Corkum, B. (2002). “Hoek-Brown failure criterion: 2002 edition.” Proc., 5th North American Rock Mechanics Symp. and 17th Tunnelling Association of Canada Conf. (NARMS-TAC), Vol. 1, RocScience, Toronto, 267–273.
Hoek, E., and Diederichs, M. S. (2006). “Empirical estimation of rock mass modulus.” Int. J. Rock Mech. Min. Sci., 43(2), 203–215.
International Society for Rock Mechanics (ISRM). (1979). “Suggested method for determination of in situ deformability of rock.” Int. J. Rock Mech. Min. Sci., 16(3), 197–214.
Iran Water and Power Resources Company (IWPCO). (2009). “Bakhtiary Project.” 〈http://en.iwpco.ir/Bakhtiari〉 (Nov. 1, 2009).
Jaeger, J., Cook, N., and Zimmerman, R. (2007). Fundamentals of rock mechanics, 4th Ed., Blackwell Publishing Ltd, Malden, MA.
Kawamoto, T., Ichikawa, Y., and Kyoya, T. (1988). “Deformation and fracturing behaviour of discontinuous rock mass and damage mechanics theory.” Int. J. Numer. Anal. Methods Geomech., 12(1), 1–30.
Oda, M., Yamabe, T., Ishizuka, Y., Kumasaka, H., Tada, H., and Kimura, K. (1993). “Elastic stress and strain in jointed rock masses by means crack tensor analysis.” Rock Mech. Rock Eng., 26(2), 89–112.
Palmstrom, A., and Singh, R. (2001). “The deformation modulus of rock masses—Comparisons between in situ tests and indirect estimates.” Tunn. Undergr. Space Technol., 16(2), 115–131.
Pande, G. N., Beer, G., and Williams, J. R. (1990). Numerical methods in rock mechanics, Wiley, Chichester, U.K.
Shi, G. H. (1988). “Discontinuous deformation analysis: A new numerical model for the statics and dynamics of block systems.” Ph.D. thesis, Univ. of California–Berkeley, Berkeley, CA.
Stucky Pars Engineering Company (SPEC). (2008). “Engineering geology and rock mechanics report—Site investigation Phase I and II.” Rep. No. 4673/4049 (Rev. 1), Tehran, Iran.
Swoboda, G., Shen, X. P., and Rosas, L. (1998). “Damage model for jointed rock mass and its application to tunnelling.” Comput. Geotech., 22(3–4), 183–203.
3DEC 4.1 [Computer software]. Minneapolis, Itasca Consulting Group.
Timoshenko, S., and Goodier, J. (1970). Theory of elasticity, 3rd Ed., McGraw Hill, New York.
Unal, E. (1997). “Determination of in situ deformation modulus: New approaches for plate-loading tests.” Int. J. Rock Mech. Min. Sci., 34(6), 897–915.
Wang, T.-T., and Huang, T.-H. (2009). “A constitutive model for the deformation of a rock mass containing sets of ubiquitous joints.” Int. J. Rock Mech. Min. Sci., 46(3), 521–530.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jun 11, 2013
Accepted: Apr 21, 2014
Published online: May 30, 2014
Published in print: Feb 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.