Interaction Mechanism between Two Large Rock Caverns
Publication: International Journal of Geomechanics
Volume 15, Issue 1
Abstract
Long-term stability of geotechnical structures is critical to any engineering design. Design of underground structures is initially planned using empirical approaches based on the rock mass–classification system. This design is mainly based on limited data obtained from boreholes and surface geological mapping. However, this design needs to be continuously updated based on the information gathered as the excavation work progresses. Over the last few years, geotechnical monitoring has emerged as a major engineering tool for engineers to review and update their existing design configuration based on the actual behavior of excavated rock mass. This paper presents a case study of the interaction of two large unlined rock caverns that were excavated using a drill-and-blast technique with a heading-down benching approach. The mechanical response of the two caverns was numerically modeled and studied in terms of the stress-deformation behavior of the excavated caverns and rock support installed, taking into account the actual sequence of heading and benching followed during parallel excavation activity at one of the construction sites. It was observed from the analysis that the crown/wall junction is sensitive to displacements under both good and fair rock-mass conditions. Limited comparative study was also carried out between the measured and calculated displacements; this showed encouraging results. Progressive buildup of forces in the rock bolts and development of the stresses in pillars were also studied as part of the interaction response of two caverns.
Get full access to this article
View all available purchase options and get full access to this article.
References
Barton, N. (2002). “Some new correlations to assist in site characterization and tunnel design.” Int. J. Rock Mech. Min. Sci., 39(2), 185–216.
Barton, N., Løset, F., Lien, R., and Lunde, J. (1980). “Application of the Q-system in design decisions.” Subsurface space, M. Bergman, ed., Vol. 2, Pergamon, New York, 553–561.
Bieniawski, Z. T. (1978). “Determining rock mass deformability: Experience from case histories.” Int. J. Rock Mech. Min., 15(5), 237–247.
British Standards Institution (BSI). (1981). “Code of practice for site investigations.” BS 5930, London.
Dhawan, K. R., Singh, D. N., and Gupta, I. D. (2004). “Three-dimensional finite element analysis of underground caverns.” Int. J. Geomech., 224–228.
Evans, B., Fredrich, J. T., and Wong, T.-F. (1990). “The brittle-ductile transition in rocks: Recent experimental and theoretical progress.” Geophysical monograph 56, American Geophysical Union, Washington, DC, 1–20.
Ghee, E. H., Zhu, B. T., and Wines, D. R. (2006). “Numerical analysis of twin road tunnels using two- and three-dimensional modelling techniques.” Proc., 4th Int. FLAC Symp. on Numerical Modelling in Geomechanics, Itasca Consulting Group, Minneapolis.
Hoek, E., and Brown, E. T. (1980). “Empirical strength criterion for rock masses.” J. Geotech. Engrg. Div., 106(GT9), 1013–1035.
Hoek, E., Carranza-Torres, C., and Corkum, B. (2002). “Hoek-Brown criterion, 2002 edition.” Proc., Mining and Tunnelling Innovation and Opportunity, North American Rock Mechanics Symp. and 17th Tunneling Association of Canada (NARMS-TAC) Conf., Vol. 1, Univ. of Toronto, Toronto, 267–273.
Mandal, A., Chakravarthy, C. P., Nanda, A., Rath, R., and Usmani, A. (2013). “Analysis and design approach for large storage caverns.” Int. J. Geomech., 69–75.
Phase 2.0 [Computer software]. Toronto, Rocscience.
Samadhiya, N. K., Viladkar, M. N., and Al-Obaydi, M. A. (2008). “Three-dimensional joint/interface element for rough undulating major discontinuities in rock masses.” Int. J. Geomech., 327–335.
Serafim, J. L., and Pereira, J. P. (1983). “Considerations on the geomechanical classification of Bieniawski.” Proc., Int. Symp. on Engineering Geology and Underground Construction, Lisbon, Portugal, Vol. I (II), International Association on Engineering Geology (IAEG), Torino, Italy, 33–44.
Yazdani, M., Sharifzadeh, M., Kamrani, K., and Ghorbani, M. (2012). “Displacement-based numerical back analysis for estimation of rock mass parameters in Siah Bisheh powerhouse cavern using continuum and discontinuum approach.” Tunnelling Underground Space Technol., 28(Mar.), 41–48.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 15 • Issue 1 • February 2015
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jun 5, 2013
Accepted: Jan 21, 2014
Published online: Jan 22, 2014
Published in print: Feb 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.