Thermal Properties of Mudstone at High Temperature
Publication: International Journal of Geomechanics
Volume 14, Issue 5
Abstract
An experimental study of the thermal damage properties of mudstone at high temperature can serve as a reference for problems in rock mechanics under high temperature, such as in oil exploration, geothermal resource development, and nuclear waste treatment. In this study, a uniaxial compression test of mudstone was conducted using the MTS 810 electrohydraulic servo system and MTS 652.02 high-temperature furnace under different temperatures ranging from 25 to 800°C to analyze the thermal damage properties of mudstone at high temperature. The main results of the study are as follows: the ductility of mudstone is improved under the effect of high temperature, and the failure mechanism exhibits a transition trend from brittleness to ductility; the elastic modulus increases from normal temperature to 400°C and then decreases rapidly when the temperature is over 400°C; and by defining the damage by tangent deformation modulus and combining the test data from uniaxial compression tests of mudstone at high temperature, the damage evolution rules of mudstone at high temperatures are obtained.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the National Natural Science Foundation of China (Grant Nos. 51074166 and 51104128), the National Basic Research Program of China (Grant No. 2010CB226800), the Doctoral Program Foundation (Grant No. 20120095110013), the Science and Technology Projects of the Urban and Rural Housing Ministry of Construction of China (Grant No. 2011-k3-5), the Joint Research Project of Prospective Produce-Learn-Research (Grant No. BY2012085), and the Blue Project of Jiangsu Province.
References
Chaki, S., Takarli, M., and Agbodjan, W. P. (2008). “Influence of thermal damage on physical properties of a granite rock: Porosity, permeability and ultrasonic wave evolutions.” Construct. Build. Mater., 22(7), 1456–1461.
Chen, H., Wu, X. D., and Zhang, F. Q. (1999). “Experimental study of thermal cracking of rock.” J. Chin. Sci. Bull., 4(8), 880–883.
Chen, J. W., Yang, C. H., and Gao, X. P. (2005). “Study on the coupled damage of temperature and mechanics for salt rock.” Chin. J. Rock Mech. Eng., 24(11), 1986–1991.
Hettema, M. H. H. (1999). “A microstructural analysis of the compaction of claystone aggregate at high temperature.” Int. J. Rock Mech. Min. Sci., 36(1), 57–68.
Homand-Etienne, F., and Houpert, R. (1989). “Thermally induced microcracking in granites: Characterization and analysis.” Int. J. Rock Mech. Min. Sci., 26(2), 125–134.
Jones, C., Keaney, G., and Meredith, P. G. (1997). “Acoustic emission and fluid permeability measurements on thermally cracked rocks.” Phys. Chem. Earth Part A, 22(1–2), 13–17.
Liu, B. C. (1994). Experimental fracture, damage mechanics testing techniques, Mechanical Industry Press, Peking, China, 27–29.
Liu, Q. S., and Xu, X. C. (2000). “Damage analysis of brittle rock at high temperature.” Chin. J. Rock Mech. Eng., 19(4), 408–411.
Mao, X. B., et al. (2009). “Properties of failure mode and thermal damage for limestone at high temperature.” Min. Sci. Technol. (China), 19(3), 290–294.
Wu, X. D., and Liu, J. R. (2003). “Factors on the thermal cracking of rocks.” J. Pet. Drill. Tech., 31(5), 24–27.
Xu, X. C. (2003). “Study on the characteristics of thermal damage for granite.” Rock Soil Mech., 24(S2), 188–192 (in Chinese).
Xu, X. L., Gao, F., and Ji, M. (2010). “Damage mechanical analysis of fracture behavior of granite under temperature.” J. Wuhan Univ. Technol., 32(1), 143–165.
Yavuz, H., Demirdag, S., and Caran, S. (2010). “Thermal effect on the physical properties of carbonate rocks.” Int. J. Rock Mech. Min. Sci., 47(1), 94–103.
Yin, S. Z. (1992). Fracture, damage theory and application, Tsinghua University Press, Beijing.
Yu, S. W., and Feng, X. Q. (1997). Damage mechanics, Tsinghua University Press, Beijing.
Zhang, L. Y., and Mao, X. B. (2008). “Mechanical properties of marble at high temperature.” J. Chongqing Jianzhu Univ., 30(6), 46–50.
Zhang, L. Y., and Mao, X. B. (2009). “Experimental research on the mechanical properties of rocks at high temperature.” Sci. China Ser. E: Techol. Sci., 52(3), 641–646.
Zhang, L. Y., and Mao, X. B. (2010). “Experimental research on thermal damage properties of marble at high temperature.” J. Min. Saf. Eng., 27(4), 505–511.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Aug 14, 2012
Accepted: Apr 5, 2013
Published online: Apr 8, 2013
Discussion open until: Sep 1, 2014
Published in print: Oct 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.