Deep Stability Evaluation of High-Gravity Dam under Combining Action of Powerhouse and Dam
Publication: International Journal of Geomechanics
Volume 13, Issue 3
Abstract
The rock foundation of a gravity dam is usually cut into slide blocks by the structural surfaces. Its stability is controlled by the characteristics and the combining action of these structural surfaces. The failure of a gravity dam can be caused by the destruction or large deformation of local rocks under the condition of certain loads. The coupling of continuous-discontinuous deformation is a typical characteristic of the process. As a new design idea, the powerhouse and dam are combined into an integer with one structural pattern to improve the antisliding stability of the gravity dam. The external loads are undertaken together by the powerhouse and dam. The loads acting on the dam can be transferred partly to the powerhouse, and the powerhouse weight and tail water pressure can increase the dam’s stability. The optimal design of a gravity dam section can be implemented, decreasing the project quantity, and reducing construction costs. This design idea has been adopted by the Yangtze Three Gorges Project in China. The coupling methods of discontinuous deformation analysis (DDA) and FEM are used to implement the deep antisliding stability evaluation for a gravity dam under the combining action of both the powerhouse and dam. The blocks are subdivided into the finite element meshes; the displacement field and stress field in the blocks are solved by FEM, and the contacts between the deformable blocks are simulated and analyzed with the DDA method. The description ability for the block deformation can be increased, the calculation precision for the stress field in block can be improved, and the ability of DDA in solving the large deformation of a multiblock system can be inherited. Therefore, the destructive form determined by this coupling method is closer to the actual situation. As an example, the coupling methods of DDA and FEM are used to analyze and assess the deep antisliding stability of the No. 3 left powerhouse-dam section of one dam when the upstream loads are taken together by the high gravity dam and the combined powerhouse located behind dam. The effect of combining the action of the powerhouse and dam is appraised by the numerical analysis for the mechanism transferring force between the dam and powerhouse, the influence on the deformation and stress of dam and powerhouse under the combining action of powerhouse and dam, the interaction of structural planes, etc. The entire instability process of the dam is simulated and analyzed by means of reducing the mechanical parameters. Last, the qualitative and quantitative analyses are implemented to evaluate the local and the whole stability of the gravity dam under the combining action of the powerhouse and dam.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research has been partially supported by National Natural Science Foundation of China (SN: 51179066, 51139001), Jiangsu Natural Science Foundation (SN: BK2012036), the Program for New Century Excellent Talents in University (SN: NCET-10-0359), the Fundamental Research Funds for the Central Universities (Grant No. 2012B06614), Jiangsu Province “333 High-Level Personnel Training Project” (Grant No. BRA2011179), and the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD) (SN: YS11001). The authors thank the reviewers for useful comments and suggestions that helped to improve the paper.
References
Beyabanaki, S. A. R., Mikola, R. G., and Hatami, K. (2008). “Three-dimensional discontinuous deformation analysis (3-D DDA) using a new contact resolution algorithm.” Comput. Geotech., 35(3), 346–356.
Bobet, A., Fakhimi, A., Johnson S., Morris, J., Tonon, F., and Yeung, M.R. (2009). “Numerical models in discontinuous media: review of advances for rock mechanics applications.” J. Geotech. Geoenviron. Eng., 135(11), 1547–1561.
Chen, S. H., Qiang, S., Shahrour, I., and Egger, P. (2008). “Composite element analysis of gravity dam on a complicated rock foundation.” Int. J. Geomech., 8(5), 275–284.
Cheng, Y. M., and Zhang, Y. H. (2002). “Coupling of FEM and DDA methods.” Int. J. Geomech., 2(4), 503–517.
Cheng, Y. M., and Zhang, Y. H. (2008). “Formulation of a three-dimensional numerical manifold method with tetrahedron and hexahedron elements.” Rock Mech. Rock Eng., 41(4), 601–628.
Dai, H. C., and Su, H. Z. (2006). “Stability against sliding in intake dam section of Yangtze River Three Gorges Project.” Rock Soil Mech., 27(4), 643–647.
Duncan, J. M. (1996). “State of the art: Limit equilibrium and finite-element analysis of slopes.” J. Geotech. Eng., 122(7), 577–596.
Ftima, M. B., and Léger, P. (2006). “Seismic stability of cracked concrete dams using rigid block models.” Comput. Struct., 84(28), 1802–1814.
Grayeli, R., and Hatami, K. (2008). “Implementation of the finite element method in the three-dimensional discontinuous deformation analysis (3D-DDA).” Int. J. Numer. Anal. Methods Geomech., 32(15), 1883–1902.
Grayeli, R., and Mortazavi, A. (2006). “Discontinuous deformation analysis with second-order finite element meshed block.” Int. J. Numer. Anal. Methods Geomech., 30(15), 1545–1561.
Khan, M. S. (2010). “Investigation of discontinuous deformation analysis for application in jointed rock masses.” Ph.D. thesis, Univ. of Toronto, Toronto.
Liu, J., Feng, X. T., and Ding, X. L. (2003a). “Stability assessment of the Three-Gorges Dam foundation, China, using physical and numerical modeling-Part II: Numerical modeling.” Int. J. Rock Mech. Min. Sci., 40(5), 633–652.
Liu, J., Feng, X. T., Ding, X. L., Zhang, J., and Yue, D. M. (2003b). “Stability assessment of the Three-Gorges Dam foundation, China, using physical and numerical modeling-Part I: Physical model tests.” Int. J. Rock Mech. Min. Sci., 40(5), 609–631.
Liu, J., Chen, J. Y., and Kong, X. J. (2003c). “Seismic stability analysis of rolled compacted concrete dam based on approach of DDA coupled with FEM.” J. Dalian Univ. Technol., 43(6), 793–798.
Maclaughlin, M. M., and Doolin, D. M. (2006). “Review of validation of the discontinuous deformation analysis (DDA) method.” Int. J. Numer. Anal. Methods Geomech., 30(4), 271–305.
Shi, G. H. (1988). “Discontinuous deformation analysis: A new numerical model for the statics and dynamics of block systems.” Ph.D. thesis, Univ. of California, Berkeley, CA.
Shi, G. H. (2009). “Applications of discontinuous deformation analysis (DDA) to rock engineering.” Proc., ISCM 2007, Tsinghua University Press, Beijing, 136–147.
Shyu, K. K., Reza, S. M., and Shahbazi, A. (1996). “Numerical modeling of deformable particles.” Proc., 1st Int. Forum on DDA, TSI Press, Albuquerque, NM, 446–453.
Tonon, F. (2007). “Analysis of single rock blocks for general failure modes under conservative and non-conservative forces.” Int. J. Numer. Anal. Methods Geomech., 31(14), 1567–1608.
Xue, G. F., and Chen, Y. H. (2011). “The research on main engineering geological problems in dam-site of Three Gorges Project.” Eng. Sci., 13(7), 51–60.
Yang, F., and Yang, J. S. (2010). “Stability of shallow tunnel using rigid blocks and finite-element upper bound solutions.” Int. J. Geomech., 10(6), 242–247.
Yeung, M. R., Jiang, Q. H., and Sun, N. (2007). “A model of edge-to-edge contact for three-dimensional discontinuous deformation analysis.” Comput. Geotech., 34(3), 175–186.
Yoshinaka, R., Osada, M., Park, H., Sasaki, T., and Sasaki, K. (2008). “Practical determination of mechanical design parameters of intact rock considering scale effect.” Eng. Geol., 96(3–4), 173–186.
Yuan, J. W., Du, C. B., and Hong, Y. W. (2008). “Static and dynamic anti-sliding stability of the powerhouse section of a gravity dam under combined effects of powerhouse and dam.” J. Hohai Univ.(Sci. Tech.), 36(2), 29–33.
Zhang, G. X., and Jing, F. (2004). “Comparison of stability of gravity dams by discontinuous deformation analysis and finite element method.” J. Hydroelec. Eng., 23(1), 10–14.
Zhang, M., Yang, H. Q., and Li, Z. K. (2005). “A coupling model of the discontinuous deformation analysis method and the finite element method.” Tsinghua Sci. Technol., 10(2), 221–226.
Zhou, W., Chang, X. L., Zhou, C. B., and Liu, X. H. (2008). “Failure analysis of high-concrete gravity dam based on strength reserve factor method.” Comput. Geotech., 35(4), 627–636.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 13 • Issue 3 • June 2013
Pages: 257 - 272
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jun 16, 2011
Accepted: Dec 29, 2011
Published online: Jan 2, 2012
Published in print: Jun 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.