Hollow-Structured Bilayer System for Windowpane Insulation
Publication: Journal of Energy Engineering
Volume 147, Issue 4
Abstract
A hollow-structured bilayer coating system was developed to reduce heat loss through windowpanes. It was formed by two separate polymer films with stable air gaps in between. The outer surface was enhanced by a low-emissivity layer. Following ASTM C1199, ASTM C518, NFRC-100, and NFRC-102, the heat transfer measurement indicated that a 3-mm-thick bilayer coating could significantly reduce the -factor from 5.8 to . The -factor could be further lowered if the coating thickness was increased. The overall visual transmittance, haze, and structural integrity were satisfactory.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This study was supported by the Advanced Research Projects Agency–Energy (ARPA-E) under Grant No. DE-AR0000737.
References
3M. 2016. “Thinsulate CC75 datasheet.” Accessed April 1, 2019. https://epdwindowfilm.com/wp-content/uploads/2020/07/3M-Thinsulate-TDS.pdf.
Alvarez, G., M. J. Palacios, and J. J. Flores. 2000. “A test method to evaluate the thermal performance of window glazings.” Appl. Therm. Eng. 20 (9): 803–812. https://doi.org/10.1016/S1359-4311(99)00065-4.
Arasteh, D., F. A. Beck, N. Stone, W. DuPont, C. Mathis, and M. Koenig. 1993. PHASE I results of the NFRC U-value procedure validation project. Peachtree Corners, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers Transactions.
ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers). 2012. “Refrigeration and air-conditioning engineers.” In ASHRAE handbook, HVAC systems and equipment, American society of heating. Atlanta: ASHRAE.
Baetens, R., B. P. Jelle, and A. Gustavsen. 2011. “Aerogel insulation for building applications: A state-of-the-art review.” Energy Build. 43 (4): 761–769. https://doi.org/10.1016/j.enbuild.2010.12.012.
Bhuiya, M. M. H., A. M. Anderson, M. K. Carroll, B. A. Bruno, J. L. Ventrella, B. Silberman, and B. Keramati. 2016. “Preparation of monolithic silica aerogel for fenestration applications: Scaling up, reducing cycle time, and improving performance.” Ind. Eng. Chem. Res. 55 (25): 6971–6981. https://doi.org/10.1021/acs.iecr.6b00769.
Buratti, C., E. Moretti, and E. Belloni. 2016. “Nanogel windows for energy building efficiency.” In Nano and biotech based materials for energy building efficiency, 41–69. New York: Springer.
Buratti, C., E. Moretti, and M. Zinzi. 2017. “High energy-efficient windows with silica aerogel for building refurbishment: Experimental characterization and preliminary simulations in different climate conditions.” Buildings 7 (4): 8. https://doi.org/10.3390/buildings7010008.
Carmody, J., D. Arasteh, S. Selkowitz, and L. Heschong. 2007. Residential windows: A guide to new technologies and energy performance. New York: WW Norton.
Carmody, J., and K. Haglund. 2012. Measure guideline: Energy-efficient window performance and selection. Golden, CO: National Renewable Energy Lab.
DuPont Teijin Films. 2017. “Mylar Polyester Film.” Accessed January 3, 2019. http://usa.dupontteijinfilms.com/wp-content/uploads/2017/01/Mylar_Physical_Properties.pdf.
Ficco, G., F. Iannetta, E. Ianniello, F. R. D. A. Alfano, and M. Dell’Isola. 2015. “U-value in situ measurement for energy diagnosis of existing buildings.” Energy Build. 104 (Oct): 108–121. https://doi.org/10.1016/j.enbuild.2015.06.071.
Gao, T., et al. 2016. “Perspective of aerogel glazings in energy efficient buildings.” Build. Environ. 95 (Jan): 405–413. https://doi.org/10.1016/j.buildenv.2015.10.001.
Gao, T., B. P. Jelle, T. Ihara, and A. Gustavsen. 2014. “Insulating glazing units with silica aerogel granules: The impact of particle size.” Appl. Energy 128 (Sep): 27–34. https://doi.org/10.1016/j.apenergy.2014.04.037.
Geschke, D. 1997. Physical properties of polymers handbook. New York: Springer.
Harrison, S. J., and S. A. Barakat. 1983. “A method for comparing the thermal performance of windows.” ASHRAE Trans. (United States) 89 (1A): 1–12.
He, Y. L., and T. Xie. 2015. “Advances of thermal conductivity models of nanoscale silica aerogel insulation material.” Appl. Therm. Eng. 81 (Apr): 28–50. https://doi.org/10.1016/j.applthermaleng.2015.02.013.
Ibrahim, M., L. Bianco, O. Ibrahim, and E. Wurtz. 2018. “Low-emissivity coating coupled with aerogel-based plaster for walls’ internal surface application in buildings: Energy saving potential based on thermal comfort assessment.” J. Build. Eng. 18 (Jul): 454–466. https://doi.org/10.1016/j.jobe.2018.04.008.
Jelle, B. P., S. E. Kalnæs, and T. Gao. 2015. “Low-emissivity materials for building applications: A state-of-the-art review and future research perspectives.” Energy Build. 96 (Mar): 329–356. https://doi.org/10.1016/j.enbuild.2015.03.024.
Jensen, K. I., J. M. Schultz, and F. H. Kristiansen. 2004. “Development of windows based on highly insulating aerogel glazings.” J. Non-Cryst. Solids 350 (Dec): 351–357. https://doi.org/10.1016/j.jnoncrysol.2004.06.047.
Ji, L. N. 2013. “Study on preparation process and properties of polyethylene terephthalate (PET).” In Applied mechanics and materials, 406–410. Bäch, Switzerland: Trans Tech Publications.
Kaklauskas, A., E. K. Zavadskas, S. Raslanas, R. Ginevicius, A. Komka, and P. Malinauskas. 2006. “Selection of low-e windows in retrofit of public buildings by applying multiple criteria method COPRAS: A Lithuanian case.” Energy Build. 38 (5): 454–462. https://doi.org/10.1016/j.enbuild.2005.08.005.
Kou, R., Y. Zhong, J. Kim, Q. Wang, M. Wang, R. Chen, and Y. Qiao. 2019. “Elevating low-emissivity film for lower thermal transmittance.” Energy Build. 193 (Jun): 69–77. https://doi.org/10.1016/j.enbuild.2019.03.033.
Kou, R., Y. Zhong, J. Kim, Q. Wang, M. Wang, R. Chen, and Y. Qiao. 2020. “Improved window energy efficiency with thermal insulating polymer-air multilayer.” Appl. Therm. Eng. 191: 116890. https://doi.org/10.1016/j.applthermaleng.2021.116890.
Lago, T. G., K. A. Ismail, and F. A. Lino. 2020. “Natural airflow in a reversible double-glass window with reflective film for building applications.” J. Energy Eng. 146 (4): 04020035. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000682.
Liu, Q., A. W. Frazier, X. Zhao, A. Joshua, A. J. Hess, R. Yang, and I. I. Smalyukh. 2018. “Flexible transparent aerogels as window retrofitting films and optical elements with tunable birefringence.” Nano Energy 48 (Jun): 266–274. https://doi.org/10.1016/j.nanoen.2018.03.029.
Mark, J. E. 2007. 1076 Physical properties of polymers handbook. New York: Springer.
Marszewski, M., et al. 2019. “Thick transparent nanoparticle-based mesoporous silica monolithic slabs for thermally insulating window materials.” ACS Appl. Nano Mater. 2 (7): 4547–4555. https://doi.org/10.1021/acsanm.9b00903.
McCluney, R., and Florida Solar Energy Center. 1996. Fenestration solar gain analysis. Cocoa, FL: Florida Solar Energy Center/Univ. of Central Florida.
Office of Energy Efficiency and Renewable Energy. 2011. Buildings energy databook. Washington, DC: USDOE.
Office of Energy Efficiency and Renewable Energy. 2014. Research and development roadmap for emerging HVAC technologies. Washington, DC: USDOE.
Schaefer, C., G. Bräuer, and J. Szczyrbowski. 1997. “Low emissivity coatings on architectural glass.” Surf. Coat. Technol. 93 (1): 37–45. https://doi.org/10.1016/S0257-8972(97)00034-0.
Schanda, J. 2002. “The concept of colour rendering revisited.” In Proc., Conf. on Colour in Graphics, Imaging, and Vision, 37–41. Poitiers, France: Society for Imaging Science and Technology.
SHIELD (Single-Pane Highly Insulating Efficient Lucid Designs). 2014. Single -pane highly insulating efficient lucid designs (SHIELD) program overview. Washington DC: Advanced Research Projects Agency–Energy.
Smith, T., and J. Guild. 1931. “The CIE colorimetric standards and their use.” Trans. Opt. Soc. 33 (3): 73. https://doi.org/10.1088/1475-4878/33/3/301.
Somasundaram, S., A. Chong, Z. Wei, and S. R. Thangavelu. 2020. “Energy saving potential of low-e coating based retrofit double glazing for tropical climate.” Energy Build. 206 (Jan): 109570. https://doi.org/10.1016/j.enbuild.2019.109570.
Urbikain, M. K. 2020. “Energy efficient solutions for retrofitting a residential multi-storey building with vacuum insulation panels and low-E windows in two European climates.” J. Cleaner Prod. 269 (Apr): 121459. https://doi.org/10.1016/j.jclepro.2020.121459.
Wang, L., R. Kou, and Y. Zhong. 2020. “Graphene-based sensing skins manufactured by scalable and controllable assembly.” In Proc., IEEE 70th Electronic Components and Technology Conf. (ECTC), 685–689. New York: IEEE.
Wright, J. L. 1996. A correlation to quantify convective heat transfer between vertical window glazings. Peachtree Corners, GA: American Society of Heating, Refrigerating and Air-Conditioning Engineers Transactions.
Zhong, Y., R. Kou, M. Wang, and Y. Qiao. 2019. “Electrification mechanism of corona charged organic electrets.” J. Phys. D: Appl. Phys. 52 (44): 445303. https://doi.org/10.1088/1361-6463/ab325f.
Zinzi, M., G. Rossi, A. M. Anderson, M. K. Carroll, E. Moretti, and C. Buratti. 2019. “Optical and visual experimental characterization of a glazing system with monolithic silica aerogel.” Sol. Energy 183 (May): 30–39. https://doi.org/10.1016/j.solener.2019.03.013.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Oct 1, 2020
Accepted: Mar 9, 2021
Published online: May 25, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 25, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.