Power Flow Method-Based Integrated Modeling and Optimization for Building Heat Transport and Gas Refrigeration System
Publication: Journal of Energy Engineering
Volume 144, Issue 5
Abstract
The combination of heat transport and heat-work conversion processes in thermal systems highlights the importance of the integrated modeling and optimization method. Following the analogy between power flow and heat transfer, this study introduces a power flow model for a building heat transport and gas refrigeration system that combines the linear temperature difference-based thermal resistances, energy sources, and additive thermo-motive forces. Holistic system constraints are deduced from the power flow model and constructed by combining Kirchhoff’s law with the heat-work conversion equations. The constraints represent each component’s performance and the system topological characteristics and reveal the system-level overall thermal energy transport and conversion discipline. For validation, an optimization case that minimizes the net input work of this system is introduced. The results show that the same heat capacity rates are necessary for the ambient and indoor air for the minimum net input work. Meanwhile, improvements in building thermal insulation performance and incremental increases in the total thermal conductance of the heat exchangers and total heat capacity rates of the working fluid all reduce the net input work. That is, the power flow method is a feasible and useful tool for the integrated modeling and optimization of thermal systems such as thermal management in the building or aircraft fields.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The present work is supported by the National Key Research and Development Program of China (Grant No. 2017YFB0902100).
References
Afram, A., and F. Janabi-Sharifi. 2014. “Review of modeling methods for HVAC systems.” Appl. Therm. Eng. 67 (1): 507–519. https://doi.org/10.1016/j.applthermaleng.2014.03.055.
Ahmadi, M. H., M. Mehrpooya, and F. Pourfayaz. 2016. “Thermodynamic and energy analysis and optimization of a transcritical power cycle driven by geothermal energy with liquefied natural gas as its heat sink.” Appl. Therm. Eng. 109: 640–652. https://doi.org/10.1016/j.applthermaleng.2016.08.141.
Akbari, A. D., and S. M. Mahmoudi. 2014. “Thermoeconomic analysis & optimization of the combined supercritical (carbon dioxide) recompression Brayton/organic Rankine cycle.” Energy 78 (Dec): 501–512. https://doi.org/10.1016/j.energy.2014.10.037.
Bejan, A. 1996. “Entropy generation minimization: The new thermodynamics of finite-size devices and finite-time processes.” J. Appl. Phys. 79 (3): 1191–1218. https://doi.org/10.1063/1.362674.
Chen, Q. 2013. “Entransy dissipation-based thermal resistance method for heat exchanger performance design and optimization.” Int. J. Heat Mass Transfer 60 (Jan): 156–162. https://doi.org/10.1016/j.ijheatmasstransfer.2012.12.062.
Chen, Q., R. H. Fu, and Y. C. Xu. 2015a. “Electrical circuit analogy for heat transfer analysis and optimization in heat exchanger networks.” Appl. Energy 139 (Feb): 81–92. https://doi.org/10.1016/j.apenergy.2014.11.021.
Chen, Q., J. H. Hao, and T. Zhao. 2017. “An alternative energy flow model for analysis and optimization of heat transfer systems.” Int. J. Heat Mass Transfer 108: 712–720. https://doi.org/10.1016/j.ijheatmasstransfer.2016.12.080.
Chen, Q., Y. F. Wang, and Y. C. Xu. 2015b. “A thermal resistance-based method for the optimal design of central variable water/air volume chiller systems.” Appl. Energy 139 (Feb): 119–130. https://doi.org/10.1016/j.apenergy.2014.11.024.
Chen, Q., and Y. C. Xu. 2012. “An entransy dissipation-based optimization principle for building central chilled water systems.” Energy 37 (1): 571–579. https://doi.org/10.1016/j.energy.2011.10.047.
Chen, Q., Y. C. Xu, and J. H. Hao. 2014. “An optimization method for gas refrigeration cycle based on the combination of both thermodynamics and entransy theory.” Appl. Energy 113 (Jan): 982–989. https://doi.org/10.1016/j.apenergy.2013.08.039.
Chen, Q., and T. Zhao. 2017. “Heat recovery and storage installation in large-scale battery systems for effective integration of renewable energy sources into power systems.” Appl. Therm. Eng. 122 (Jul): 194–203. https://doi.org/10.1016/j.applthermaleng.2017.04.076.
Cheng, X., and X. Liang. 2013. “Discussion on the applicability of entropy generation minimization to the analyses and optimizations of thermodynamic processes.” Energy Convers. Manage. 73 (Sep): 121–127. https://doi.org/10.1016/j.enconman.2013.04.012.
Cheng, X., X. Xu, and X. Liang. 2011. “Application of entransy to optimization design of parallel thermal network of thermal control system in spacecraft.” Sci. China Technol. Sci. 54 (4): 964–971. https://doi.org/10.1007/s11431-011-4294-3.
Choudhary, T. 2017. “Thermodynamic assessment of SOFC-ICGT hybrid cycle: Energy analysis and entropy generation minimization.” Energy 134 (Sep): 1013–1028. https://doi.org/10.1016/j.energy.2017.06.064.
Dixit, M., A. Arora, and S. Kaushik. 2017. “Thermodynamic and thermoeconomic analyses of two stage hybrid absorption compression refrigeration system.” Appl. Therm. Eng. 113 (Sep): 120–131. https://doi.org/10.1016/j.applthermaleng.2016.10.206.
Guo, Z., X. Liu, W. Tao, and R. Shah. 2010. “Effectiveness-thermal resistance method for heat exchanger design and analysis.” Int. J. Heat Mass Transfer 53 (13): 2877–2884. https://doi.org/10.1016/j.ijheatmasstransfer.2010.02.008.
Guo, Z., H. Zhu, and X. Liang. 2007. “Entransy—A physical quantity describing heat transfer ability.” Int. J. Heat Mass Transfer 50 (13): 2545–2556. https://doi.org/10.1016/j.ijheatmasstransfer.2006.11.034.
Han, Y., D. Wang, C. Zhang, and Y. Zhu. 2017. “The entransy degeneration and entransy loss equations for the generalized irreversible Carnot engine system.” Int. J. Heat Mass Transfer 106 (Mar): 895–907. https://doi.org/10.1016/j.ijheatmasstransfer.2016.10.035.
Hao, J. H., Q. Chen, and Y. C. Xu. 2014. “A global optimization method for regenerative air refrigeration systems.” Appl. Therm. Eng. 65 (1): 255–261. https://doi.org/10.1016/j.applthermaleng.2014.01.021.
Haseli, Y. 2016. “Efficiency of irreversible Brayton cycles at minimum entropy generation.” Appl. Math. Modell. 40 (19): 8366–8376. https://doi.org/10.1016/j.apm.2016.04.03.
Homod, R. Z. 2013. “Review on the HVAC system modeling types and the shortcomings of their application.” J. Energy 2013: 1–10. https://doi.org/10.1155/2013/768632.
Hu, K., L. Chen, Q. Chen, X. H. Wang, J. Qi, F. Xu, and Y. Min. 2017. “Phase-change heat storage installation in combined heat and power plants for integration of renewable energy sources into power system.” Energy 124 (Apr): 640–651. https://doi.org/10.1016/j.energy.2017.02.048.
Huh, J. H., and M. J. Brandemuehl. 2008. “Optimization of air-conditioning system operating strategies for hot and humid climates.” Energy Build. 40 (7): 1202–1213. https://doi.org/10.1016/j.enbuild.2007.10.018.
Jaluria, Y. 2007. Design and optimization of thermal systems. Boca Raton, FL: CRC Press.
Karaali, R., and I. T. Öztürk. 2015. “Thermoeconomic optimization of gas turbine cogeneration plants.” Energy 80 (Feb): 474–485. https://doi.org/10.1016/j.energy.2014.12.004.
Khaliq, A., and S. Kaushik. 2004. “Second-law based thermodynamic analysis of Brayton/Rankine combined power cycle with reheat.” Appl. Energy 78 (2): 179–197. https://doi.org/10.1016/j.apenergy.2003.08.002.
Kusiak, A., and G. Xu. 2012. “Modeling and optimization of HVAC systems using a dynamic neural network.” Energy 42 (1): 241–250. https://doi.org/10.1016/j.energy.2012.03.063.
Li, T., Z. Yuan, P. Xu, and J. Zhu. 2016. “Entransy dissipation/loss-based optimization of two-stage organic Rankine cycle (TSORC) with R245fa for geothermal power generation.” Sci. China Technol. Sci. 59 (10): 1524–1536. https://doi.org/10.1007/s11431-016-0151-1.
Myat, A., K. Thu, Y. D. Kim, B. B. Saha, and K. C. Ng. 2012. “Entropy generation minimization: A practical approach for performance evaluation of temperature cascaded co-generation plants.” Energy 46 (1): 493–521. https://doi.org/10.1016/j.energy.2012.07.062.
Reindl, D., and S. A. Klein. 1998. “The relationship of optimum heat exchanger allocation and minimum entropy generation rate for refrigeration cycles.” J. Energy Resour. Technol. 120 (2): 172–178. https://doi.org/10.1115/1.2795030.
Wang, W., X. Cheng, and X. Liang. 2013. “Entropy and entransy analyses and optimizations of the Rankine cycle.” Energy Convers. Manage. 68 (Apr): 82–88. https://doi.org/10.1016/j.enconman.2012.12.020.
Wang, Y. F., and Q. Chen. 2015a. “A direct optimal control strategy of variable speed pumps in heat exchanger networks and experimental validations.” Energy 85 (Jun): 609–619. https://doi.org/10.1016/j.energy.2015.03.107.
Wang, Y. F., and Q. Chen. 2015b. “Direct optimal control of valve openings in heat exchanger networks and experimental validations.” Int. J. Heat Mass Transfer 90 (Nov): 627–635. https://doi.org/10.1016/j.ijheatmasstransfer.2015.06.064.
Wemhoff, A., and M. Frank. 2010. “Predictions of energy savings in HVAC systems by lumped models.” Energy Build. 42 (10): 1807–1814. https://doi.org/10.1016/j.enbuild.2010.05.017.
Wu, S., and J. Q. Sun. 2012. “A physics-based linear parametric model of room temperature in office buildings.” Build. Environ. 50 (Apr): 1–9. https://doi.org/10.1016/j.buildenv.2011.10.005.
Xu, Y. C., and Q. Chen. 2012a. “An entransy dissipation-based method for global optimization of district heating networks.” Energy Build. 48 (May): 50–60. https://doi.org/10.1016/j.enbuild.2012.01.008.
Xu, Y. C., and Q. Chen. 2012b. “Minimization of mass for heat exchanger networks in spacecrafts based on the entransy dissipation theory.” Int. J. Heat Mass Transfer 55 (19): 5148–5156. https://doi.org/10.1016/j.ijheatmasstransfer.2012.05.015.
Xu, Y. C., and Q. Chen. 2013. “A theoretical global optimization method for vapor-compression refrigeration systems based on entransy theory.” Energy 60 (Oct): 464–473. https://doi.org/10.1016/j.energy.2013.08.016.
Xu, Y. C., Q. Chen, and Z. Y. Guo. 2015. “Entransy dissipation-based constraint for optimization of heat exchanger networks in thermal systems.” Energy 86 (Jun): 696–708. https://doi.org/10.1016/j.energy.2015.04.024.
Yuan, F., and Q. Chen. 2012. “A global optimization method for evaporative cooling systems based on the entransy theory.” Energy 42 (1): 181–191. https://doi.org/10.1016/j.energy.2012.03.070.
Yucer, C. T., and A. Hepbasli. 2011. “Thermodynamic analysis of a building using exergy analysis method.” Energy Build. 43 (2): 536–542. https://doi.org/10.1016/j.enbuild.2010.10.019.
Zhang, T., X. Liu, H. Tang, J. Liu, and Y. Jiang. 2016. “Exergy and entransy analyses in air-conditioning system. Part 1: Similarity and distinction.” Energy Build. 128 (Mar): 876–885. https://doi.org/10.1016/j.enbuild.2016.07.055.
Zhao, S. Y., and Q. Chen. 2016. “A thermal circuit method for analysis and optimization of heat exchangers with consideration of fluid property variation.” Int. J. Heat Mass Transfer 99 (Aug): 209–218. https://doi.org/10.1016/j.ijheatmasstransfer.2016.03.124.
Zhao, T., Y. Min, Q. Chen, and J. H. Hao. 2016. “Electrical circuit analogy for analysis and optimization of absorption energy storage systems.” Energy 104 (Jun): 171–183. https://doi.org/10.1016/j.energy.2016.03.120.
Zmeureanu, R., and X. Y. Wu. 2007. “Energy and exergy performance of residential heating systems with separate mechanical ventilation.” Energy 32 (3): 187–195. https://doi.org/10.1016/j.energy.2006.04.007.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 144 • Issue 5 • October 2018
Copyright
©2018 American Society of Civil Engineers.
History
Received: Dec 7, 2017
Accepted: May 17, 2018
Published online: Aug 14, 2018
Published in print: Oct 1, 2018
Discussion open until: Jan 14, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.