Fast and Accurate Method for Calculating the Surface Mechanical Responses of Asphalt Pavements
Publication: Journal of Engineering Mechanics
Volume 146, Issue 9
Abstract
Since the linear elastic layered theory was developed in 1940s, it has been widely used to evaluate asphalt pavement soundness, and the mechanical responses have been used to analyze the bearing capacity of pavement structures and top-down fatigue cracking. However, there is poor convergence of mechanical responses on the surface of the top layer. Therefore, this article proposes an approach to quickly and accurately determine the mechanical response of asphalt pavement surfaces. This approach separates the equations for calculating the mechanical response into two parts, and then the two parts are solved according to the convergence of integrals of surface mechanical responses. The result shows that the surface point calculation method cannot only ensure the accuracy of calculation, but also greatly improve the efficiency of calculation. This approach provides an effective tool to determine mechanical responses.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study are proprietary or confidential in nature and may only be provided with restrictions.
References
Ameri, M., M. Malakouti, and P. Malekzadeh. 2014. “Quasi-static analysis of multilayered domains with viscoelastic layer using incremental-layerwise finite element method.” Mech. Time-Depend. Mater. 18 (1): 275–291. https://doi.org/10.1007/s11043-013-9227-z.
ARA (Applied Research Associates). 2004. Guide for mechanistic-empirical design of new and rehabilitated pavement structures. Washington, DC: National Cooperative Highway Research Program.
Asphalt Institute. 1991. Asphalt pavement thickness design for highways and streets (MS-1). Lexington, KY: Asphalt Institute.
Burmister, D. M. 1945a. “The general theory of stresses and displacements in layered systems. I.” J. Appl. Phys. 16 (2): 89–94. https://doi.org/10.1063/1.1707558.
Burmister, D. M. 1945b. “The general theory of stresses and displacements in layered soil systems. II.” J. Appl. Phys. 16 (3): 126–127. https://doi.org/10.1063/1.1707562.
Burmister, D. M. 1945c. “The general theory of stresses and displacements in layered soil systems. III.” J. Appl. Phys. 16 (5): 296–302. https://doi.org/10.1063/1.1707590.
De Jong, D. L., M. G. F. Peutz, and A. R. Korswagen. 1979. Computer program BISAR. Layered systems under normal and tangential surface load. Amsterdam, Netherlands: Koninklijke/Shell Laboratorium.
Erlingsson, S., and A. Ahmed. 2013. “Fast layered elastic response program for the analysis of flexible pavement structures.” Road Mater. Pavement 14 (1): 196–210. https://doi.org/10.1080/14680629.2012.757558.
Hayhoe, G. F. 2002. LEAF: A new layered elastic computational program for FAA pavement design and evaluation procedures, 1–15. Washington, DC: Federal Aviation Administration.
Huang, Y. H. 2004. Pavement analysis and design. 2nd ed. Upper Saddle River, NJ: Pearson Education.
Khazanovich, L., and Q. Wang. 2007. “MnLayer: High-performance layered elastic analysis program.” Transp. Res. Rec. 2037 (1): 63–75. https://doi.org/10.3141/2037-06.
Liu, P., D. Wang, J. Hu, and M. Oeser. 2016. “SAFEM: Software with graphical user interface for fast and accurate finite element analysis of asphalt pavements.” J. Test. Evaluation 45 (4): 1301–1315. https://doi.org/10.1520/JTE20150456.
Liu, P., D. Wang, F. Otto, J. Hu, and M. Oeser. 2018. “Application of semi-analytical finite element method to evaluate asphalt pavement bearing capacity.” Int. J. Pavement Eng. 19 (6): 479–488. https://doi.org/10.1080/10298436.2016.1175562.
Maina, J., and K. Matsui. 2005. “Elastic multi-layered analysis using DE-integration.” PRIMS 41 (4): 853–867. https://doi.org/10.2977/prims/1145474598.
Shell International Petroleum. 1978. “Shell pavement design manual.” In Asphalt pavements and overlays for road traffic. London: Shell International Petroleum.
Uzan, J. 1994. “Advanced backcalculation techniques.” In Nondestructive testing of pavements and backcalculation of moduli: ASTM special technical publication No. 1198, 3–37. Philadelphia, PA: ASTM.
Van Cauwelaert, F. J., D. R. Alexander, T. D. White, and W. R. Barker. 1989. “Multilayer elastic program for backcalculating layer moduli in pavement evaluation.” In Nondestructive testing of pavements and backcalculation of moduli: STP 1026, edited by G. Y. Baladi, and A. J. Bush III, 171–188. Philadelphia, PA: ASTM.
You, L., K. Yan, Y. Hu, J. Liu, and D. Ge. 2018. “Spectral element method for dynamic response of transversely isotropic asphalt pavement under impact load.” Road Mater. Pavement 19 (1): 223–238. https://doi.org/10.1080/14680629.2016.1230513.
You, L., K. Yan, N. Liu, T. Shi, and S. Lv. 2019. “Assessing the mechanical responses for anisotropic multi-layered medium under harmonic moving load by Spectral Element Method (SEM).” Appl. Math. Model. 67 (Mar): 22–37. https://doi.org/10.1016/j.apm.2018.10.010.
Zhao, Y., L. Wang, P. Chen, and W. Zeng. 2015a. “Determination of surface viscoelastic response of asphalt pavement.” J. Eng. Mech. 141 (9): 04015031. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000943.
Zhao, Y., C. Zhou, W. Zeng, and Y. Ni. 2015b. “Accurate determination of near-surface responses of asphalt pavements.” Road Mater. Pavement 16 (1): 186–199. https://doi.org/10.1080/14680629.2014.979221.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Aug 10, 2019
Accepted: Feb 25, 2020
Published online: Jun 19, 2020
Published in print: Sep 1, 2020
Discussion open until: Nov 19, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.