Analytical and Experimental Investigation of the Behavior of a Rocking Masonry Tuff Wall
Publication: Journal of Engineering Mechanics
Volume 146, Issue 6
Abstract
In this study, the analytical and experimental dynamic behavior of a rocking masonry tuff wall was investigated. The considered structural element is a wall clamped at the base that starts to behave as a rigid block once the strength of the interface between mortar and brick is exceeded. Therefore, the rocking motion takes place on an irregular base composed of the same block material. The results of free and forced oscillations are presented: the free responses are obtained by applying different initial displacement amplitudes at the top of the wall; and the forced behavior is explored by imposing harmonic input motions by means of a one-direction shaking table. To interpret the dynamic behavior of the wall, the classical rigid block model and a proposed simplified rocking deformable block model are used. The observation of the experimental curves representing the block frequency versus the oscillation amplitude during the free rocking motion suggests that the block does not always behave as a simply rigid block. The Housner model is used to evaluate the restitution coefficient, whereas the rocking deformable block model is used to describe the main dynamic characteristics of the wall. The good agreement between both the free and the forced motion tests and the analytical results provided by the models assures the correctness of the interpretation of the experimented dynamic behavior of masonry tuff walls.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Data, models, or code generated or used during the study are available from the corresponding author by request. Specifically, the following data are available: (1) all the data of the results, and (2) the source code of the numerical integration procedure.
Acknowledgments
This work has been partially supported by the Ministry of Education, University, and Research (MIUR) under Grant PRIN-2015, 2015TTJN95, P. I. Fabrizio Vestroni, “Identification and Monitoring of Complex Structural Systems.” The authors thank the anonymous reviewer for their comments, which contributed to the final formulation of the equations for total linear momentum and the correct description of the impact. The authors also thank the technicians of the Materials and Structures Laboratory, Dipartimento di Ingegneria Strutturale e Geotecnica (DISG), Sapienza University of Rome.
References
Acikgoz, S., and M. DeJong. 2012. “The interaction of elasticity and rocking in flexible structures allowed to uplift.” Earthquake Eng. Struct. Dyn. 41 (15): 2177–2194. https://doi.org/10.1002/eqe.2181.
Acikgoz, S., and M. DeJong. 2016. “Analytical modelling of multi-mass flexible rocking structures.” Earthquake Eng. Struct. Dyn. 45 (13): 2103–2122. https://doi.org/10.1002/eqe.2735.
Addessi, D., E. Cappelli, C. Gatta, and F. Vestroni. 2017. “Out-of-plane dynamic response of a tuff masonry wall: Shaking table testing and numerical simulation.” In Vol. 1 of Proc., 6th Int. Conf. on Computational Methods in Structural Dynamics and Earthquake Engineering, 2449–2459. Rhodes Island, Greece. https://doi.org/10.7712/120117.5580.17464.
Al Shawa, O., G. De Felice, A. Mauro, and L. Sorrentino. 2012. “Out-of-plane seismic behaviour of rocking masonry walls.” Earthquake Eng. Struct. Dyn. 41 (5): 949–968. https://doi.org/10.1002/eqe.1168.
Amitabh, D., D. Konstantinidis, and W. El-Dakhakhni. 2018. “Seismic response of rocking frames with top support eccentricity.” Earthquake Eng. Struct. Dyn. 47 (12): 2496–2518. https://doi.org/10.1002/eqe.3096.
Andreaus, U. 1990. “Sliding-uplifting response of rigid blocks to base excitation.” Earthquake Eng. Struct. Dyn. 19 (8): 1181–1196. https://doi.org/10.1002/eqe.4290190808.
Arredondo, C., M. Jaimes, and E. Reinoso. 2019. “A simplified model to evaluate the dynamic rocking behaviour of irregular free-standing rigid bodies calibrated with experimental shaking-table tests.” J. Earthquake Eng. 23 (1): 43–71. https://doi.org/10.1080/13632469.2017.1309601.
Bachmann, J., M. Vassiliou, and B. Stojadinović. 2017. “Dynamics of rocking podium structures.” Earthquake Eng. Struct. Dyn. 46 (14): 2499–2517. https://doi.org/10.1002/eqe.2915.
Brzeski, P., T. Kapitaniak, and P. Perlikowski. 2016. “The use of tuned mass absorber to prevent overturning of the rigid block during earthquake.” Int. J. Struct. Stab. Dyn. 16 (10): 1550075. https://doi.org/10.1142/S0219455415500753.
Chatzis, M., M. García Espinosa, and A. W. Smyth. 2017. “Examining the energy loss in the inverted pendulum model for rocking bodies.” J. Eng. Mech. 143 (5): 04017013. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001205.
Chatzis, M., and A. W. Smyth. 2012. “Modeling of the 3D rocking problem.” Int. J. Non Linear Mech. 47 (4): 85–98. https://doi.org/10.1016/j.ijnonlinmec.2012.02.004.
DeJong, M., and E. Dimitrakopoulos. 2014. “Dynamically equivalent rocking structures.” Earthquake Eng. Struct. Dyn. 43 (10): 1543–1563. https://doi.org/10.1002/eqe.2410.
de Leo, A., G. Simoneschi, C. Fabrizio, and A. Di Egidio. 2016. “On the use of a pendulum as mass damper to control the rocking motion of a non-symmetric rigid block.” Meccanica 51 (11): 2727–2740. https://doi.org/10.1007/s11012-016-0448-5.
Diamantopoulos, S., and M. Fragiadakis. 2019. “Seismic response assessment of rocking systems using single degree-of-freedom oscillators.” Earthquake Eng. Struct. Dyn. 48 (7): 689–708. https://doi.org/10.1002/eqe.3157.
Di Egidio, A., R. Alaggio, A. Contento, M. Tursini, and E. Della Loggia. 2015. “Experimental characterization of the overturning of three-dimensional square based rigid block.” Int. J. Non Linear Mech. 69 (Mar): 137–145. https://doi.org/10.1016/j.ijnonlinmec.2014.12.003.
Di Egidio, A., A. de Leo, and A. Contento. 2019. “The use of a pendulum dynamic mass absorber to protect a trilithic symmetric system from the overturning.” Math. Prob. Eng. 2019 (2): 1–14. https://doi.org/10.1155/2019/4843738.
Di Egidio, A., A. de Leo, and G. Simoneschi. 2016. “Effectiveness of mass-damper dynamic absorber on rocking block under one-sine pulse ground motion.” Int. Limits Non Linear Mech. 98 (Jan): 154–162. https://doi.org/10.1016/j.ijnonlinmec.2017.10.015.
Di Egidio, A., D. Zulli, and A. Contento. 2014. “Comparison between the seismic response of 2D and 3D models of rigid blocks.” Earthquake Engineering Engineering Vibr. 13 (1): 151–162. https://doi.org/10.1007/s11803-014-0219-z.
Gatta, C., D. Addessi, and F. Vestroni. 2018. “Static and dynamic nonlinear response of masonry walls.” Int. J. Solids Struct. 155 (Dec): 291–303. https://doi.org/10.1016/j.ijsolstr.2018.07.028.
Gesualdo, A., A. Iannuzzo, V. Minutolo, and M. Monaco. 2018. “Rocking of freestanding objects: Theoretical and experimental comparisons.” J. Theor. App. Mech. 56 (4): 977–991. https://doi.org/10.15632/jtam-pl.56.4.977.
Housner, G. 1963. “The behavior of inverted pendulum structures during earthquakes.” Bull. Seismol. Soc. Am. 53 (2): 403–417.
Kounadis, A. N. 2013. “Parametric study in rocking instability of a rigid block under harmonic ground pulse: A unified approach.” Soil Dyn. Earthquake Eng. 45 (Feb): 125–143. https://doi.org/10.1016/j.soildyn.2012.10.002.
Lagomarsino, S. 2015. “Seismic assessment of rocking masonry structures.” Bull. Earthquake Eng. 13 (1): 97–128. https://doi.org/10.1007/s10518-014-9609-x.
Pompei, A., A. Scalia, and M. Sumbatyan. 1998. “Dynamics of rigid block due to horizontal ground motion.” J. Eng. Mech. 124 (7): 713–717. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:7(713).
Psycharis, I., M. Fragiadakis, and I. Stefanou. 2013. “Seismic reliability assessment of classical columns subjected to near-fault ground motions.” Earthquake Eng. Struct. Dyn. 42 (14): 2061–2079. https://doi.org/10.1002/eqe.2312.
Purvance, M., A. Abdolrasool, and J. Brune. 2008. “Freestanding block overturning fragilities: Numerical simulation and experimental validation.” Earthquake Eng. Struct. Dyn. 37 (5): 791–808. https://doi.org/10.1002/eqe.789.
Shenton, H. W., III. 1996. “Criteria for initiation of slide, rock, and slide-rock rigid-body modes.” J. Eng. Mech. 122 (7): 690–693. https://doi.org/10.1061/(ASCE)0733-9399(1996)122:7(690).
Shenton, H. W., III., and N. P. Jones. 1991. “Base excitation of rigid bodies. I: Formulation.” J. Eng. Mech. 117 (10): 2286–2306. https://doi.org/10.1061/(ASCE)0733-9399(1991)117:10(2286).
Simoneschi, G., A. de Leo, and A. Di Egidio. 2017a. “Effectiveness of oscillating mass damper system in the protection of rigid blocks under impulsive excitation.” Eng. Struct. 137 (Apr): 285–295. https://doi.org/10.1016/j.engstruct.2017.01.069.
Simoneschi, G., A. Geniola, A. de Leo, and A. Di Egidio. 2017b. “On the seismic performances of rigid blocks coupled with an oscillating mass working as TMD.” Earthquake Eng. Struct. Dyn. 46 (9): 1453–1469. https://doi.org/10.1002/eqe.2864.
Spanos, P., A. Di Matteo, A. Pirrotta, and M. Di Paola. 2017. “Rocking of rigid block on nonlinear flexible foundation.” Int. J. Non Linear Mech. 94 (Sep): 362–374. https://doi.org/10.1016/j.ijnonlinmec.2017.06.005.
Spanos, P. D., and A.-S. Koh. 1984. “Rocking of rigid blocks due to harmonic shaking.” J. Eng. Mech. 110 (11): 1627–1642. https://doi.org/10.1061/(ASCE)0733-9399(1984)110:11(1627).
Spanos, P. D., and A.-S. Koh. 1986. “Analysis of block random rocking.” Soil Dyn. Earthquake Eng. 5 (3): 178–183. https://doi.org/10.1016/0267-7261(86)90021-7.
Taniguchi, T. 2002. “Non-linear response analyses of rectangular rigid bodies subjected to horizontal and vertical ground motion.” Earthquake Eng. Struct. Dyn. 31 (8): 1481–1500. https://doi.org/10.1002/eqe.170.
Truniger, R., M. Vassiliou, and B. Stojadinović. 2015. “An analytical model of a deformable cantilever structure rocking on a rigid surface: Development and verification.” Earthquake Eng. Struct. Dyn. 44 (15): 2795–2815. https://doi.org/10.1002/eqe.2609.
Tung, C. 2007. “Initiation of motion of a free-standing body to base excitation.” Earthquake Eng. Struct. Dyn. 36 (10): 1431–1439. https://doi.org/10.1002/eqe.703.
Vassiliou, M., K. R. Mackie, and B. Stojadinović. 2014. “Dynamic response analysis of solitary flexible rocking bodies: Modeling and behavior under pulse-like ground excitation.” Earthquake Eng. Struct. Dyn. 43 (10): 1463–1481. https://doi.org/10.1002/eqe.2406.
Vassiliou, M., R. Truniger, and B. Stojadinović. 2015. “An analytical model to study deformable cantilever structures rocking on a rigid surface: Experimental verification.” Earthquake Eng. Struct. Dyn. 44 (15): 2775–2794. https://doi.org/10.1002/eqe.2608.
Voyagaki, E., I. Psycharis, and G. Mylonakis. 2013. “Rocking response and overturning criteria for free standing rigid blocks to single-lobe pulses.” Soil Dyn. Earthquake Eng. 46 (Mar): 85–95. https://doi.org/10.1016/j.soildyn.2012.11.010.
Wong, C., and W. Tso. 1889. “Steady state rocking response of rigid blocks part 2: Experiment.” Earthquake Eng. Struct. Dyn. 18 (1): 107–120. https://doi.org/10.1002/eqe.4290180110.
Yim, C., A. Chopra, and J. Penzien. 1980. “Rocking response of rigid blocks to earthquakes.” Earthquake Eng. Struct. Dyn. 8 (6): 565–587. https://doi.org/10.1002/eqe.4290080606.
Zhang, J., and N. Makris. 2001. “Rocking response of free-standing blocks under cycloidal pulses.” J. Eng. Mech. 127 (5): 473–483. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:5(473).
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Apr 27, 2019
Accepted: Dec 17, 2019
Published online: Apr 6, 2020
Published in print: Jun 1, 2020
Discussion open until: Sep 6, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.